• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.55-62
• /
• 2015

This paper deals with a switching method to minimize the current ripple component of 3-phase interleaved bidirectional DC-DC converter for charging and discharging of the battery. The characteristics of the output current ripple in 3-phase and 2-phase operation modes according to the variation of battery voltage is analyzed and a phase conversion method for minimizing the magnitude of the current ripple is proposed. The proposed method can extend the light load range because the switching frequency is lower than that of a 3-phase operating system. Simulation and experimental results show the usefulness of the proposed method.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.51-57
• /
• 1998

As DAS becomes a common practice, various operational tools are needed. This paper proposes the new restoration strategy considering the coordination of the protective devices and the generalized method for determining the switching sequence. The effectiveness of the proposed method has been tested on the various real systems.

• 한국정보통신학회논문지
• /
• 제15권9호
• /
• pp.1965-1970
• /
• 2011

본 논문에서는 그래프에 기초하여 유한체상의 스위칭함수를 도출하는 알고리즘과 이를 바탕으로 스위칭함수를 회로로 구현하는 방법을 제안하였다. 방향성그래프의 경로 수로부터 행렬방정식을 유도한 후에 이에 따른 스위칭 함수회로설계 알고리즘을 제안하였으며, 설계된 회로와 함께 방향성 그래프의 특성을 만족할 수 있게 노드들에 대한 코드를 할당하는 알고리즘을 제안하였다. 본 논문에서 제안한 알고리즘을 통해 설계한 스위칭함수회로는 기존의 방법에 비해 좀 더 최적화된 스위칭함수회로를 구현할 수 있었으며, 제안한 스위칭함수회로설계 알고리즘을 통해 임의의 자연수의 경로 수를 갖는 방향성 그래프에 대한 설계가 가능하였다. 또한, 입출력단자 수의 감소, 회로구성의 간략화, 연산속도의 향상과 비용감소 등의 이점이 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5223-5242
• /
• 2017

In the last decade, the 2.4 GHz band of IEEE 802.11 WLANs has become heavily congested due to the explosive increase in demand of Wi-Fi connectivity. With the current deployment of enterprise WLANs, channel switching mechanism continues to exhibit inefficiencies because it cannot adapt to real-time channel condition and the inability to support seamless channel switching. Software Defined Networking (SDN) as an emerging architecture is promising to introduce flexibility and programmability for wireless network management. Leveraging SDN to existing enterprise WLANs, channel switching method can be improved significantly. This paper presents a software-defined enterprise WLAN framework with a load aware automatic channel switching solution, which utilizes AP load and channel interference factor (CIF) to provide seamless channel switching. Two automatic channel switching algorithms named Single Switch (SS) and Double Switch (DS) are proposed to improve the overall user experience and the experience of users with highest traffic load respectively. Experiment results demonstrate that our solution can efficiently improve user experience in terms of jitter, transmission delay and network throughout when compared to the conventional channel switching mechanism.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.44-57
• /
• 2019

Recently, the use of LLCL filters for grid inverters has been suggested to give better harmonic attenuation than the commonly used L and LCL filters, particularly around the switching frequency. Nevertheless, this filter is mainly designed for constant switching frequency pulse width modulation (CSF PWM) methods. In variable switching frequency PWM (VSF PWM), the harmonic components are distributed across a wide frequency band which complicates the use of a high order filter, including LCL and LLCL filters. Recently, a confined band variable switching frequency (CB-VSF) PWM method has been proposed and demonstrated to be superior to the conventional constant switching frequency (CSF) PWM in terms of switching losses. However, the applicability of LLCL filters for this type of CB-VSF PWM has not been discussed. In this paper, the authors study the suitability of an LLCL filter for CB-VSF PWM and propose design guidelines for the filter parameters. Using simulation and experimental results, it is demonstrated that the effectiveness of an LLCL filter with CB-VSF PWM depends on the parameters of the filters as well as the designed variable frequency band of the PWM. Simulation results confirm the performance of the suggested LLCL design, which is further validated using a lab scale prototype.

• 디지털콘텐츠학회 논문지
• /
• 제10권2호
• /
• pp.199-207
• /
• 2009

Q-스위칭은 셔터나 다른 광학소자를 레이저 광 공진기 내에 넣어 광이 공진기 내에서 발진하는데 손실을 유발하고, 충분한 반전분포가 활성 매질 내에서 생성되면 순간적으로 셔터를 열어 공진기 내에 축적된 에너지가 매우 강한 빛으로 방출되게 하는 것이다. 이와 같이 Q-스위칭은 레이저 공진기의 Q--factor를 감소시켰다가 갑자기 증가시키는 것이다. 레이저 Q-스위칭의 방법에는 mechanical switching 방법, electro-optic switching 방법, switching by saturable absorber 방법, acousto-optic switching 방법 등 크게 4가지가 쓰이고 있다. 이들 중 전기광학적인 효과에 의한 전기적인 전환은 짧은 펄스폭의 Q-스위칭 펄스를 생성할 수 있기 때문에 널리 사용되고 있다. 따라서, 전기광학효과의 특성을 가진 Pockel cell은 Q--switch로 사용하기 적합한 것으로 알려져 있다. 본 연구에서는 포켈스 셀 Q-스위치용 구동 장치를 스위칭 소자인 FET와 PIC 마이크로프로세서 및 펄스 트랜스로 설계, 제작하고, 펄스형 Nd:YAG 레이저 시스템에 적용하여 Q-스위치의 동작 특성을 조사, 연구하였다. 또한, 이 Q-스위치를 통하여 출력된 Nd:YAG 레이저 빔의 측정치를 이론적 계산에 의해 구해진 예상치와 비교하여 Q-스위칭 된 레이저 빔의 특성을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.287-290
• /
• 1998

This paper presents PWM method which modulates two third period only during one cycle of power converter. This method is compared with the conventionl sinusoidal modulation method applying to the power converter with large capacity necessitating low switching frequency. The presented modulation method enables to reduce power semiconductor rating, minimize switching loss, and improve the current wave form.

• 전자공학회논문지
• /
• 제54권1호
• /
• pp.41-45
• /
• 2017

본 논문에서는 조합논리스템의 효율적인 다중출력스위칭함수 구성의 한 가지 방법을 제안하였다. 제안한 방법의 시간영역기반의 멀티플렉싱을 기반으로 공통다중종단노드확장논리결정도를 도출하여 최종 조합논리시스템의 다중출력스위칭함수를 구하므로 기존의 시간영역기반의 멀티플렉싱에 비해 최적화된 입력변수의 쌍과 출력변수 쌍을 상당히 줄일 수 있으며, 또한 코스트 면에서도 유리하다. 또한, 입출력단자 수의 감소, 회로구성의 간략화, 연산속도의 향상 등의 이점이 있으며 기존의 방법에 비해 좀 더 정규성과 확장성이 용이하다.

• 제어로봇시스템학회논문지
• /
• 제2권4호
• /
• pp.279-286
• /
• 1996

In this paper, variable structure control(VSC) based on reaching law method with fuzzy inference for nonlinear systems is proposed. The reaching law means the reaching condition which forces an initial state of system to reach switching surface in finite time, and specifies the dynamics of a desired switching function. Since the conventional reaching law has fixed coefficients, the chattering can be existed largely in sliding mode. In the design of a proposed fuzzy reaching law, we fuzzify RP(representative point)'s orthogonal distance to switching surface and RP's distance the origin of the 2-dimensional space whose coordinates are the error and the error rate. The coefficients of the reaching law are varied appropriately by the fuzzy inference. Hence the state of system in reaching mode reaches fastly switching surface by the large values of reaching coefficients and the chattering is reduced in sliding mode by the small values of those. And the effectiveness of the proposed fuzzy reaching law method is showen by the simulation results of the control of a two link robot manipulator.

• Journal of Power Electronics
• /
• 제12권4호
• /
• pp.548-558
• /
• 2012

In this paper, a novel offset-based single-state pulse width modulation (PWM) method for achieving zero common-mode voltage (CMV) and reducing switching losses in multilevel inverters is presented. The specific active switching state of the zero common-mode (ZCM) voltage that approximates the reference voltage can be deduced from the switching state sequence of the reduced CMV phase disposition PWM (CMV PD PWM) method. From the reference leg voltages for the zero common-mode voltage, an N-to-2-level transformation defines a virtual two-level inverter and the corresponding nominal leg voltage references. The commutation process of the reduced CMV PD PWM method in a multilevel inverter and its outputs can be simply followed in a nominal switching time diagram for the virtual inverter. The characteristics of the reduced CMV PD PWM and the single-state PWM for zero common-mode voltage are analyzed in detail in this paper. The theoretical analysis of the proposed PWM method is verified by experimental results.