• ETRI Journal
• /
• 제39권3호
• /
• pp.364-372
• /
• 2017

For the reliability of controllers in a software defined network (SDN), a dynamic and self-learning schedule method (DSL) is proposed. This method is original and easy to deploy, and optimizes the combination of multiple controllers. First, we summarize multiple controllers' combinations and schedule problems in an SDN and analyze its reliability. Then, we introduce the architecture of the schedule method and evaluate multi-controller reliability, the DSL method, and its optimized solution. By continually and statistically learning the information about controller reliability, this method treats it as a metric to schedule controllers. Finally, we compare and test the method using a given testing scenario based on an SDN network simulator. The experiment results show that the DSL method can significantly improve the total reliability of an SDN compared with a random schedule, and the proposed optimization algorithm has higher efficiency than an exhaustive search.

• 전기전자학회논문지
• /
• 제12권4호
• /
• pp.239-245
• /
• 2008

In this paper, a dc-dc power converter scheme with the FPGA based technology is proposed to apply for solar power system which has many features such as the good waveform, high efficiency, low switching losses, and low acoustic noises. The circuit configuration is designed by the conventional control type converter circuit using the isolated dc power supply. This new scheme can be more widely used for industrial power conversion system and many other purposes. Also, I proposed an efficient photovoltaic power interface circuit incorporated with a FPGA based DC-DC converter and a sine-pwm control method full-bridge inverter. The FPGA based DC-DC converter operates at high switching frequency to make the output current a sine wave, whereas the full-bridge inverter operates at low switching frequency which is determined by the ac frequency. As a result, we can get a 1.72% low THD in present state using linear control method. Moreover, we can use stepping control method, we can obtain the switching losses by Sp measured as 0.53W. This paper presents the design of a single-phase photovoltaic inverter model and the simulation of its performance.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.769-773
• /
• 2004

Conventional SVPWM method has null switching vectors. Null switching vectors cause high common-mode voltage in induction motor drive system. The newly developed common mode voltage reduction PWM technique don't use zero switching state for inverter control. It is realized by changing software without additional hardware. Simulation and experimental results show that proposed method are reduced common mode voltage more than conventional method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.381-384
• /
• 1999

In this paper, we addressed the problem of reducing the switching activity in pipeline datapath and proposed a solution. clock-gating method is a kind of practical technique for reducing switching activity in finite state machine. But, in the case that the target gated function unit has a pipeline structure, there is some spurious switching activity on each stage register group. This occur in early stage of every function enable cycle. In this paper we proposed a method to solve this problem. This method generates the enable signal to each pipeline stage to gate the clock feeding register group. Experimental results showed effective reduction of dynamic powers in pipeline circuits.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권5호
• /
• pp.231-237
• /
• 2005

Many conventional multi-level inverters have detected switching faults by using the over voltage and current. However, fault detection of the switching elements is very difficult because the voltage and current due to each switching fault decrease more than the normal operation. Moreover, the dc-link unbalancing voltage causes a serious problem in the safety and reliability of system when the 3-level inverter faults occur Therefore, this paper proposes the simple fault diagnose method and the neutral-point-voltage control method that can protect the 3-level inverter system from the unbalancing voltage of the do-link capacitors when the faults of switching elements occur in the 3-level inverter that is very efficient in ac motor drives of the high voltage and high power applications. Through experiment results, the validity of the proposed method is demonstrated.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권3호
• /
• pp.115-119
• /
• 2001

This paper presents an efficient and simple method for analyzine maximum simultaneous switching noise (SSN) on ground interconnection networks in CMOS systems. For the derivation of maximum SSN expression, we use ${\alpha}$-power law MOS model and Taylor's series approximation. The accuracy of the proposed method is verified by comparing the results with those of previous researches and HSPICE simulations under the contemporary process parameters and environmental conditions. The proposed method predicts the maximum SSN values more accurately when compared to existing approaches even in most practical cases such that exist some output drivers not in transition.

• Archives of Pharmacal Research
• /
• 제17권6호
• /
• pp.458-461
• /
• 1994

A new high-performance liquid chromatographic method with column switching has been onto a Bondapak phenyl/corsil $(37-50{\;}{\mu}m)$ precolumn and polar plasma components were washed with 0.06 M borate burffer. After valve switching, the concentrated drug were eluted in the back-flush mode and separated on a ${\mu}-Bondapak$ C18 column with acetonitrilke-phosphate buffer as the mobile phae. The method showed excellent precision, accuracy and speed with detection limit of $0.01{\;}{\mug}/ml^{-1}$. Total analysis time per smaple was less than 20 min and the coefficients of variation for intra and inter-assay were less than 5.635. This method has been successfully applied to plasma smaples from eats after oral administration of omeprazole.

• 전기의세계
• /
• 제29권10호
• /
• pp.678-688
• /
• 1980

This paper is concerned with the computer design of the multiple-output switching functions by using the improved MASK method in order to obtain the paramount prime implicants (prime implicants of the multiple-output switching function) and new algorithm to design the optimal logic network. All the given minterms for each function are considered as minterms of one switching function to simplify the desigh procedures. And then the improved MASK method whose memory requirement and time consuming are much less than any existing known method is applied to identify the paramount prime implicants. In selecting the irredundant paramount prime implicants, new cost criteria are generated. This design technuque is suitable both for solving a problem by hand or programming it on a digital computer.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1354-1357
• /
• 1993

This paper proposes that the best reasoning(i.e. rule evaluation) method which should be used in a fuzzy system significantly depends on the reasoning environment. It is shown that allowing for dynamic switching of reasoning methods leads to better performance, even when only two different reasoning methods are considered. This paper discusses DSFS (Dynamic Switching Fuzzy System) which dynamically switches and finds the best reasoning method (from among 80 different possible reasoning methods) to use depending on the reasoning situation. To overcome the reasoning speed and memory problem of DSFS due to its computational requirements, the DSFS Switching Reasoning Table method is proposed and its higher performance as compared to a conventional fuzzy system is shown. Finally, efforts to obtain general relationships between the characteristics of different reasoning methods and the actual control surface/environment is discussed.

• ETRI Journal
• /
• 제31권5호
• /
• pp.593-597
• /
• 2009

In this paper, we present a spatial perturbation method to control the optical patterns in semiconductor microresonators in the far-field configuration. We propose a fast all-optical switch which operates at a low light level. The switching beam controls the behavior of output beams with strong intensities. The method has been applied successfully to different optical patterns such as rolls, squares, and hexagons.