• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1221-1226
• /
• 2015

This paper proposes a multiple switch mode power supply (SMPS) system based on the wireless network which controls variable load. The system enables power supply of up to 600W using 200W SMPS as a unit module and provides a controlling function of output power based on variable load and a monitoring function based on wireless network. The controlling function for output power measures the variation of output power and facilitates efficient power supply by controlling output power based on the measured variation value. The monitoring function guarantees a stable power supply by observing the multiple SMPS system in real time via wireless network. The performance of the proposed system was examined by various experiments. In addition, it was verified through standardized test of Korea Testing Certification. The results were given and discussed.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.387-395
• /
• 2021

Distributed resources such as renewable energy sources and ESS are connected to the low voltage direct current(LVDC) distribution network through the power conversion system(PCS). Control power is required for the operation of the PCS. In general, controller power is supplied from AC power or DC power through switch mode power supply(SMPS). However, the conventional SMPS has a low input voltage, so development and research on high input voltage self-power suitable for LVDC is insufficient. In this paper, to develop Self-Power that can be used for LVDC, the characteristics of the conventional topology are analyzed, and a series-input single-output flyback converter using a flux-sharing transformer for high voltage is designed. The high input voltage Self-Power was designed in the DCM(discontinuous current mode) to reduce the switching loss and solve the problem of current dissipation. In addition, since it operates even at low input voltage, it can be applied to many applications as well as LVDC. The validity of the proposed high input voltage self-power is verified through experiments.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.137-142
• /
• 2023

SMPS(Switched Mode Power Supply, 전력공급장치) 회로설계 시 특별한 고찰 없이 지나치기 쉬운 부분이 스너버(snubber) 회로이다. 그러나 스너버(snubber) 회로에 따른 SMPS의 성능저하 및 SET 전체에 미치는 영향은 결코 무시할 수 없다. 또한 스위칭시 피크치 전압과 전류로부터 소자를 보호하고 on/off 스위칭시 손실을 줄여주기 위하여 스위치 양단에 스너버(snubber) 회로를 부가해준다. 따라서 본 논문에서는 스너버(snubber) 회로에 대한 충분한 이해를 위해 이론적 해석 및 실제 회로설계 때 설계자가 응용할 수 있는 실험식을 정리하여, 스너버(snubber) 회로의 최적화를 도모하고자 한다.

• 전력전자학회지
• /
• 제9권4호
• /
• pp.28-31
• /
• 2004

최근 전자제품의 소형경량화가 이루어지면서 전원장치의 고밀도화를 요구하고 있다. 이러한 기술동향에 따라 최근 DC-DC Converter를 소형, 고효율화하려는 연구가 매우 활발하게 이루어지고 있다. 각종 전자통신기기의 직류안정화 전원으로 폭넓게 이용되고 있는 Switch Mode Power Supply(SMPS) 중에 For-ward Converter에 대한 특성과 설계방법을 Simulation Program인 Power Supply Designer를 이용하여 알아보기로 한다.(중략)

• 전기전자학회논문지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2010

본 논문에서는 대기전력을 줄일 수 있는 Green Mode Power IC 회로를 설계하였다. 이 회로는 switch mode power supply(SMPS)을 구동하기 위한 PWM 기능을 가지고 있으며, 불필요한 소비전력을 제거하기 위해 burst mode와 skip mode 구간을 만들고 대기전력을 낮출 수 있도록 외부의 Power MOSFET에 의해 제어된다. 제안한 회로는 KEC 30V-High Voltage 0.5um CMOS process를 이용하여 시뮬레이션 하였다. 회로 내부는 크게 voltage regulator 회로, voltage reference 회로, UVLO(Under Voltage Lock Out)회로, Ibias 회로, green 회로, PWM 회로, OSC 회로, protection회로, control 회로, Level shift&Driver 회로로 구성되어 있다. 시뮬레이션 결과로부터 회로 동작 시 각 블록의 소비전류를 측정하여 확인한 결과 블록 별 전류총합이 1.29mA이었고, 이 값은 목표 설계치인 1.3mA을 충족시킴을 입증하였다. 이 값은 기존 IC의 소비전류보다 1/2이상 줄어든 값이며, 대기모드로 동작할 경우는 전력소비를 1W 미만까지 줄일 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1891-1895
• /
• 2003

Switch-mode power supplies (SMPS) have become a major source of conducted electromagnetic interference (EMI) which is the combination between differential mode (DM) noise and common mode (CM) noise. This paper presents the conducted EMI reduction approach in flyback switched mode power supply by rerouting for circuit balance to reduce common mode noise. And differential mode noise can be reduce by adding $c_x$ capacitor across the input power line, and passive element to the gate drive of switching device MOSFET to slow down the switching times. This combination of our approach is the effective way to reduce the conducted EMI and it is also a cost effective for product design

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.20-28
• /
• 2009

This paper presents the design of zero current switching ZCS pulse frequency modulation type DC-DC converter for magnetron power supply. A magnetron serving as the microwave source in a microwave oven is driven by a switch mode power supply (SMPS). SMPSs have the advantages of improved efficiency, reduced size and weight, regulation and the ability to operate directly from the converter DC bus. The demands of the load system and the design of the power supply required to produce constant power at 4[kV]. A magnetron power supply requires the ability to limit the load current under short circuit conditions. The current source series resonant converter is a circuit configuration which can achieve this. The main features of the proposed converter are an inherent protection against a short circuit at the output, a high voltage gain and zero current switching over a large range of output power. These characteristics make it a viable choice for the implementation of a high voltage magnetron power supply.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.22-27
• /
• 2020

In this paper, a generalized efficiency equation was proposed to estimate the internal loss of the SMPS (switched-mode power supply) with 3 variables. The first variable was an internal loss not related to the load current such as auxiliary power, the second was a loss proportional to the current such as diode loss, and the third was a loss proportional to square of the current such as conduction loss. Especially, theoretical internal losses of the totem pole bridgeless PFC which is widely used for high efficiency SMPS were expressed as output function to compare generalized efficiency equation. In addition, in order to reduce the conduction loss of the switch, when a multiple switch were paralleled, the correlation with the efficiency was analyzed and shown as a graph. In order to confirm the degree of the parallel switch structure on the efficiency improvement, a 2kW class totem pole bridgeless PFC was constructed and the effectiveness of the analysis was confirmed by comparing the generalized efficiency equation and theoretical loss analysis results with experimental data.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.77-80
• /
• 2003

Switching Mode Power Supply(SMPS) is widely used in many industrial fields. Power factor improvement and harmonic reduction technique are very important in SMPS. In this paper, we propose the circuit applied Flying Capacitor Snubber for improving power factor of boost converter on fast switching state. Snubber circuit consists of a inductor, two diodes and a capacitor. The losses of switching are reduced by inserting a snubber inductor in the series path of the boost switch and the rectifier diode to control the di/dt rate of the rectifier during it's turn-off. Prior to actual experiment, the circuit analysis Is implemented by PSPICE simulation.