• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.205-208
• /
• 2002

An existing ATM switch fabric uses VPI(Virtual Path Identifier) and VCI(Virtual Channel Identifier) information to route ATM cell. But AAL type 2 switch which efficiently processes delay-sensitive, low bit-rate data such as a voice routes the ATM cell by using CID(Channel Identification) field in addition to VPI and VCI. In this paper, we research the AAL type 2 switch that performs the process of CPS packet. The Receive unit extracts the CPS packet from the inputted ATM cell. The designed receive unit consists of input FIFO, r)( status table, CAM(Content Addressable Memory), new CID table and partial packet memory. Also the designed receive unit supports the PCI interface with host processor. The receive unit is implemented in Xilinx FPGA and operates at 72MHz.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.147-161
• /
• 1997

In the future, the performance of B-lSDN offering the multimedia and a various service depends on the performance of switch that is the important factor consisting of network. Bufferless banyan network consisted of MIN(multistage interconnection network) selected for- the fabric of ATM switch and has a limitation of performance because of blocking. Input buffered banyan networks with FIFO(first-in first-out) buffering scheme for the reduction of blocking and the cell bypass queueing theory for the reduction of HOL(head of line) blocking were seperately compared of the performance of switch. Specially input buffered banyan networks were applied monotonic buffering scheme that was proposed. As a result of simulation, Buffered Banyan Network with cell bypass queueing theory showed better performance than FIFO type input buffered Banyan network. Monotonic increase buffering scheme showed better performance than Monotonic decrease buffering scheme.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.383-386
• /
• 2001

This paper presents a novel multicast architecture for shared multibuffer ATM switch, which is tailored for throughput enhancement in multicast environments. The address queues for multicast cells are separated from those for unicast cells to arbitrate multicast cells independently from unicast cells. Three read cycles are carried out during each cell slot and multicast cells have chances to be read from shared buffer memory(SBM) in the third read cycle provided that the shared memory is not accessed to read a unicast cell. In this architecture, maximum two cells are queued at each fabric output port per time slot and output mask choose only one cell. Extensive simulations are carried out and it shows that the proposed architecture has enhanced throughput comparing with other multicast schemes in shared multibuffer switch architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1926-1940
• /
• 1998

This paper is the part II of research results on the performance evaluation of fully interconnected ATM switch, and includes the performance evaluation results for bursty traffic and nonuniform distribution. The switch model is a fyully interconnected switch type proposed by ETRI and is the proper architecutre for a small-sized switch element. The proposed switch consists of two steps of buffering scheme in the switch fabric in order to effectively absorb the effect of bursty nature of ATM traffic. The switch uses bit addressing method for addressing shcmeme and thus it is easy to implement multicasting function without adding additional functional block. In order to incorporate the bursty nature of traffic in ATM networks, we use IBP(Interrupted Bernoulli Process) model as an input traffic model as well as random traffic model which has been used as a traditional traffic model. In order to design the various scenarios for simulation, we considered both uniform and nonuniform output distribution, and also implemented multicast function. In this paper, we presented the simulation results in diverse environments and evaluated the performance of the switch.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.535-538
• /
• 2002

InfiniBand is a switched-fabric architecture for next generation I/O systems and data centers. The InfiniBand Architecture (IBA) promises to replace bus-based architectures, such as PCI, with a switched-based fabric whose benefits include higher performance, higher RAS (reliability, availability, scalability), and the ability to create modular networks of servers and shared I/O devices. The switched-fabric InfiniBand consists of InfiniBand subnets with channel adapters, switches, and routers. In order to fully grasp the operational characteristics of InfiniBand architecture (IBA) and use them in ongoing design specification, simulation of subnet management of IBA is inevitable. In this paper, thus, we implement an IBA simulator and test some practical sample networks using it. The simulator shows the flow of operation by which the correctness and effectiveness of the system can be verified.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.25-33
• /
• 1997

The end-to-end rate-based control mechanism is used for the flow control of the ABR service to allow much more flexibility in ATM switching system. To accommodate the ABR service effciently many algorithms such as EFCI, EPRCA, ERICA, and CAPC2 have been proposed for the switch algorithm. ABR cells and related RM cells are received at the ATM switch fabric transparently without any processing. And then cells received from the traffic source are queued in the ABR buffer of switching system. The ABR buffer usually has some thresholds for easy congestion control signal transmission. Whatever we use, therefore, these can be many ABR traffic control algorithms to implement the ABR transfer capability. The genertion of congestion indicate signal for ABR control algorithms is determined by ABR buffer satus. And ABR buffer status is determined by ABR cells transfer ratio in ATM switch fabrics. In this paper, we presented the functional structures for control of the ABR traffic capability, proposed the readout scheduling, cell slot allocation of output link and the buffer allocation model for effective ABR traffic guranteeing with considering CBR/VBR traffics in ATM switch. Since the proposed readout scheduling scheme can provide more avaliable space to ABR buffer than existing readout scheduling scheme, generation rate of a SEND signal, that is, BCN signal in destination node can be increased for ABR call connection. Therefore, the proposed scheme, in this paper, can be appropriate as algorithm for effective ABR traffic service on output link of ATM switching node.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.264-267
• /
• 2002

This paper presents the design of a pipelined virtual output queue routing engine for an advanced input-queued ATM switch, which has a serial cross bar structure. The proposed routing engine has been designed for wire-speed routing with a pipelined buffer management. It provides the tolerance of requests and grants data transmission latency between the routing engine and central arbiter using a new request control method that is based on a high-speed shifter. The designed routing engine has been implemented in a field programmable gate array (FPGA) chip with a 77MHz operating frequency, 16$\times$16 switch size, and 2.5Gbps/port speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.466-474
• /
• 2014

This paper presents the line contention avoidance experiments with an optical switch, which was selected based on the comparison analysis and evaluation of the various characteristics. For example, the function, structure, strengths and weaknesses of the optical switches. After considering the nonblocking, modularity, upgrade ability and optical power loss of the several kind of the switch fabrics, a switch was selected. The selected switch fabric by using wavelength converters was controlled to avoid contention of the optical lines. In this experiment shows an example of three cases. As a result of this experiment, optical signal shows a changed peek of optical power in output. By showing a peak it confirms that the contention was avoided. By analyzing of changed optical power according to the channel setting time and release time to control of the switch could be determined. If this analysis applied to the network design, economical and efficient structures can be formed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.1
• /
• pp.47-59
• /
• 1993

Recently, Broadband ISDN(B-ISDN) has received increased attention as a communication architecture which can support multimedia applications. Also, Asynchronous Transfer Mode(ATM) is considered as a promising technique to transfer and switch various kinds of media, such as telephone speech, data and motion video. Comparisons among a variety of ATM switching systems which have already been proposed will provide quite useful information for the new ATM switching system design. To facilitate the comparison, we introduce the design requirements and classification criteria for the ATM switch, and propose a performance analysis model for the Banyan network which is the basic switching fabric of most multi-stage ATM switching systems. The model is based on the standard discrete-time Markov chain analysis and can be conveniently used for extensive Banyan network analysis. The computational results are also presented.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.463-470
• /
• 2003

Many types of switching fabrics have been proposed for use in ATM networks. Multistage Interconnection Networks (MINs) constitute a large class of ATM switching systems that are widely used in today´s internetworking. One of the most veil-known types of multistage networks is the banyan network. The banyan network is attractive for its simple routing scheme and low hardware complexity, but its throughput is very limited due to internal blocking and output contention. In this paper, we propose an input-buffered dual-banyan switch model with multiple switching fabric between switch input and output to avoid internal and Head-of Line blocking. By performance analysis and simulation, we show that our model has a lower ceil delay and 96% throughput which is much better than other banyan-type switch architecture.