• 한국운동역학회지
• /
• 제24권3호
• /
• pp.287-293
• /
• 2014

The purpose of this study was to investigate the effects of Hoehn-Yahr scale on the activation of lower-extremity muscles during walking. Electromyography (EMG) analysis was carried out on 36 patients with Parkinson's disease in the off phase of the medication cycle. We recorded EMG signals of the tibialis anterior (TA), medial gastrocnemius (MG), lateral gastrocnemius (LG), soleus (SOL), rectus femoris (RF), vastus lateralis (VL), semitendinosus (ST) and biceps femoris (BF) using Noraxon 16 channels EMG system during walking at preferred speed. Rectified EMG signals were normalized to reference voluntary contractions (RVC) over a gait cycle at the preferred speed, allowing for an assessment of how the activity was distributed over the gait cycle. Compared to the H & Y Scale 1, H & Y Scale 3 exhibited greater activation of the vastus lateralis during mid-stance and greater activation of the medial gastrocnemius during terminal swing. Compared to the H & Y Scale 1, H & Y Scale 2 and 3 exhibited less activation of the tibialis anterior during initial swing. We conclude that the more Hoen & Yahr Scale increase, the more abnormal lower-extremity muscles activation.

• 대한정형도수물리치료학회지
• /
• 제13권1호
• /
• pp.36-43
• /
• 2007

Purpose: An objective analysis and observations were to be done on hemiplegia patients that are wearing a walking support device, Stroke shoes. Their improvements in walking pace, the reduction of distance between the two knee joint, the increase of curve angle of the knee joint and their steps and the reduction of ankle joint upon swing phase were analyzed using a 20 walking analyzer. Methods: An examination was carried out to see the patients' communication skill and independent walking and then let them walk with the Stroke shoes on to get results before and after wearing it. Simi Reality Motion Systems GmbH (Germany, 2007) was used to analyze the results regarding knee joint and ankle joint angle changes of sagitta plane and coronal plane, stepping distances, distances between the knees and walking pace. Results: 1. The articulation angle of ankle joint during swing phase decreased and knee joint has shown a statistically significant increase in such value(p<0.05). 2. Only knee joint showed a significant increase in articulation angle during heel strike(p<0.05). 3. Knee joint showed a significant increase in articulation angle during toe off(p<0.05). 4. The distance between the two knees as well as their foot steps significantly decreased compared with when Stroke shoes were not worn(p<0.05). 5. Stroke shoes with FES have shown positive effects on the patients in improving their walking styles overall. (p<0.05). Conclusion: There was an improvement in rotation walking pattern by a reduction in the distance between the knees after wearing Stroke shoes with FES. Plantar flexion reduced that occurred in ankle joint during walking and flexion angle increased in knee joint, both of which improved foot drop which was a major problem in hemiplegia patients. Also it is believed that the device will have some positive influences on knee joint stiffening paralysis to aid in improving inefficient walking phases.

• 한국운동역학회지
• /
• 제31권4호
• /
• pp.283-289
• /
• 2021

Objective: The aim of this study was to analyze the pattern of Kolman technique by five Korean top gymnasts including the three national athletes on horizontal bar. Method: Two digital high-speed camcorders were used with 90 frames/sec and their Kolman motions were filmed in sports science secondary school gymnasium at U city. After the kinematic and kinetic variables were carried out by Kwon3D 3.1 motion package during the whole phase, the optimized release motion was investigated by simulating the body COG path during the aerial phase. Results: Firstly, it was revealed that the average changes of hip, shoulder joint angle were 84 deg, 53 deg respectively during the functional sub-phase and the average swing phaseal time was 1.21 s. Secondly, it was revealed that the average body COG positions and velocities (Y, Z) at release were -0.65 m, 0.48 m, 1.65 m/s, 3.97 m/s respectively and the average release angle, peak height and flight time were 67 deg, 1.29 m, 0.79 s respectively. Thirdly, it was revealed that the directions of somersault of whole and lower body, tilt of lower body were counterclockwise, whereas the directions of tilt of whole body, twist of whole and lower body were clockwise at the ready for re-grasp. Lastly, it was revealed that the body COG paths were different from each other during the aerial phase followed by the different body COG velocities. Conclusion: Korean gymnasts of this study controlled their motions well in terms of the timing of hip·shoulder joint, body position, body angular momentum especially during the functional sub-phase, but their motions were different during the aerial phase. Nonetheless most of them made the adequate body position at the instant of re-grasp. It would be suggested that Korean gymnasts except S3 should increase the vertical velocity.

• Korean Chemical Engineering Research
• /
• 제54권3호
• /
• pp.320-331
• /
• 2016

제철소에서 부생되는 LDG (Linze Donawitz gas) 가스는 일산화탄소(CO)를 60% 이상 포함한다. LDG로부터 CO를 고순도로 분리하는 2가지 공정을 고려하였다: COSORB와 CO-PSA (pressure swing adsorption). 이 연구의 목적은 기술경제성평가(TEA: techno-economic analysis)를 통하여 이 두 공정 중 어떤 공정이 더 경제성이 높은 지를 결정하는 하는 것이었다. TEA의 기술적 측면에서는 초기투자비(TCI: total capital investment)와 총생산비용(TPC: total production cost)을 추정하기 위하여 먼저 공정흐름도(PFD: process flow diagram)를 완성하고, 물질 및 에너지 수지식을 계산한 후, 장치 종류 및 크기를 결정하였다. TEA의 경제성 측면에서는 투자회수율(ROI: return on investment) 및 투자회수기간(PBP: payback period)과 같은 경제성 판단기준을 산출하였고, ROI와 PBP에 가장 큰 영향을 주는 인자들을 찾기 위하여 민감도 분석을 수행하였다. CO-PSA 공정은COSORB 공정 보다 더 높은 ROI와 더 낮은 PBP로 인하여 경제적 우위를 보여주었다. CO의 가격은 ROI와 PBP에 가장 큰 영향을 주는 인자로 파악되었다.

• 한국산학기술학회논문지
• /
• 제22권4호
• /
• pp.353-359
• /
• 2021

군은 군사훈련을 실전적으로 수행하기 위하여 최신 과학기술을 적용한 마일즈 장비를 활용한 훈련체계를 구축하고 있다. 마일즈 훈련체계는 마일즈 장비를 활용하여 야전에서 실기동 훈련을 실시함으로써 전투 인원과 장비의 피해상황을 실제 전장과 동일하게 모사할 수 있도록 하는 체계이다. 이를 통해 훈련병력은 실전과 유사한 체험을 할 수 있으며 특히, 정보, 통신 및 컴퓨터 시뮬레이션 등의 첨단 과학기술을 활용하는 통합체계로 구축되어 훈련에 참가하는 용사들의 훈련효과를 극대화 할 수 있다. 본 연구는 육군에서 활용 중인 마일즈 훈련효과를 과학적 기법을 활용하여 분석하였으며 중대급 마일즈를 대상으로 하였다. 특히 훈련효과를 분석하기 위한 효과지표는 관련 문헌조사 및 전문가 의견수렴을 통해 도출하였으며 Swing기법을 적용하여 효과지표별 가중치를 산출하고 훈련 경험자를 대상으로 한 설문조사 결과를 결합하여 최종 훈련효과를 도출하였다. 연구결과 마일즈 훈련효과는 기존의 마일즈를 활용하지 않는 훈련에 비해 2.6배 효과적이며 분산분석을 통해 신분별로 마일즈 훈련에 대한 만족도는 높으며 그 차이는 통계적으로 유의미한 것으로 도출되었다.

• PNF and Movement
• /
• 제6권2호
• /
• pp.19-30
• /
• 2008

Purpose : This study was performed for find out temporal spatial parameter of the gait according to age. Method : Four groups of healthy people were allocated randomly in this study : group I(little child, 15), group II(child, 18) and group III(young people, 17), group(elder people, 16). This study was performed from 01 December to 31 December in 2007. Results : The results were as follows : 1. The swing phase was the longest group II, group IV was the shortest. Each groups, there was significant difference in swing phase(p<.05). 2. The stance phase was the longest group IV, group II was the shortest. Each groups, there was significant difference in stance phase(p<.05). 3. The single support time was the longest group II, group IV was the shortest. Each groups, there was significant difference in single support time(p<.05). 4. The double support time was the longest group IV, group II was the shortest. Each groups, there was significant difference in double support time(p<.05). 5. The gait velocity was the fastest group II, group I was the slowest. Each groups, there was significant difference in gait velocity(p<.05). 6. The toe in/out was very increased group IV, group I was very decreased. Each groups, there was significant difference in toe in/out(p<.05). 7. The cadence was the highest group I, group IV was the lowest. Each groups, there was significant difference in cadence(p<.05). 8. The step length was the longest group III, group I was the shortest. Each groups, there was significant difference in step length(p<.05). 9. The step length asymmetry ratio was the highest group IV, group III was the lowest. Each groups, there was no significant difference in step length asymmetry ratio(p>.05). 10. The single support time asymmetry ratio was the highest group I, group IV was the lowest. Each groups, there was no significant difference in single support time asymmetry ratio (p>.05). 11. The FAP was the highest group III, group I was the lowest. Each groups, there was significant difference in FAP(p<.05).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.36-36
• /
• 2009

In this work, we describe a method to fabricate the Pt-silicided SB-MOSFETs with a n-type Silicon-On-Insulator (SOI) substrate as an active layer and demonstrate their electrical and structural properties. The fabricated SB-MOSFETs have novel structure and metal gate without sidewall. The gate oxide with a thickness of 7 nm was deposited by sputtering. Also, this fabrication processes were carried out below $500^{\circ}C$. As a result, Subthreshold swing value and on/off ratio of Fabricated SB MOSFETs was 70 [mV/dec] and $10^8$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1520-1523
• /
• 1997

A rigorous dynamic simulation was performed in binary gas mixture H$_{2}$/CO (70:30 vol.%) to determinate start-up operating conditions of PSA(Pressure Swing Adsorption) processes. The rigorous dynamic model for the PSA process contains an Ergun equation for expressing the pressure drop in a bed, and valve equations to compute the boundary pressure change of the bed. As the result of the continuous dynamic simulation of 100 operating cyles in various initial conditions, the unsteady-state appeared in the early period and the cyclic steady-state came out about 20th cycle in feed condition and vaccum condition, and 30th cycle in pure H$_{2}$ condition. As time goes by valve equations made change the pressure at each end of the bed in ressurization, countercurrunt-depressurization and pressure equalization steps. The H$_{2}$ purity and the recovery is 99.99% and 86.73% respectively, which is slightly higher than the experimental data. Main contributiion of this study includes supplying fundamental technologies of handling combined variables PSA processes by developing rigorous models.

• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.101-106
• /
• 1993

In order to separate the Freon-12 and air mixture$(CF_2Cl_2/Air=0.1/99.9 vol.%)$ by pressure swing adsorption (PSA), the breakthrough curve was experimentally observed in a fixed bed adsorption column. A single adsorber was packed with various adsorbents such as, the activated carbon(S-AC, W-AC) and the molecular sieve(MS-5A, MS-13X). The order of appearance of breakthrough curve is MS-5A > MS-13X > W-AC > S-AC. The activated carbon was found to be more effective adsorbent for separating Freon-12 from the mixture than the molecular sieve was. From the experimental data obtained by the separation of Freon-12 gas out of the air stream in the steady-state PSA process cycle, whose size is the same one of column used for the breakthrough curve observation, it has been confirmed that Freon-rich gas could be obtained from the purge step of PSA and Freon-free air could be obtained from the adsorption step of PSA cycle.

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.94-103
• /
• 1997

It is necesary that analog buffer circuit should drive an external load in the VLSI design such as switched capacitor efilter (SCF), D/A converter, A/d converter, telecommunicatin circuit, etc. The conventional CMOS buffer circuit have many probvlems according as CMOS technique. Firstly, Capacity of large load ar enot able to opeate well. The problem can be solve to use class AB stages. But large load are operated a difficult, because an element of existing CMOS has a quadratic functional relation with inptu and outut voltage versus output current. Secondly, whole circuit of dynamic rang edecrease, because a range of inpt and output voltages go down according as increasing of intergration rate drop supply voltage. In this paper suggests that new differential CMOS line driver make out of operating an external of large load. In telecommunication's chip case transmission line could be a load. It is necessary that a load operate line driver. The proposal circuit is planned to hav ea high generation power rnage of voltage with preservin linearity. And circuit of capability is inspected through simulation program (HSPICE).