• 펄프종이기술
• /
• 제46권4호
• /
• pp.69-75
• /
• 2014

Effects of alkali swelling of HwBKP (hardwood bleached kraft pulp) at a low concentration below 2 percent (based on the oven-dried weight of pulp) on handsheet properties were investigated. Swelling treatment of HwBKP was performed at various low NaOH concentrations with/without beating. Then, the changes in handsheet properties were evaluated in terms of bulk, optical and strength properties. It was found that bulk was slightly increased when the alkali concentration was increased. When the pulp was only swollen without beating, paper optical and strength properties was slightly decreased or not changed with alkali concentration. When the pulp was alkali-swollen after beating, paper strength and opacity showed almost no changes while brightness was increased. When the pulp was beaten after NaOH swelling, alkali concentration showed almost no effect on brightness and opacity of paper. Paper strength was slightly decreased with alkali concentration, suggesting that alkali pretreatment before refining could adversely affect refining efficiency.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.132-139
• /
• 2006

The dispersion of organoclay in ethylene propylene diene terpolymer (EPDM) matrix was correlated with the rheological and swelling properties of nanocomposites. X-ray diffraction pattern (XRD) and transmission electron microscopic (TEM) analysis exhibited the disordered-intercalated structure of EPDM/organoclay nanocomposite. The extent of the disordered phase increased with increasing organoclay content up to a limiting value of 3 wt% after which equilibrium tended towards intercalation. The dispersion effect of organoclay in EPDM matrix was clarified by the physicochemical properties like rheological response and swelling thermodynamics in toluene. The increase in viscoelastic properties of EPDM nanocomposite with increasing organoclay content up to 3 wt%, followed by a subsequent decrease up to 4 wt%, was correlated in terms of the disordered and ordered states of the dispersed nano-clay sheets. Swelling measurements revealed that the change in entropy of the swelling increased with the increase in disorder level but decreased with the increase in intercalation level of organoclay in the disordered-intercalated nanocomposite. The increase in solvent uptake was comparable with the free volume in EPDM matrix upon inclusion of silicate particles, whereas the inhibition in solvent uptake for higher organoclay loading was described by bridging flocculation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.288-289
• /
• 2014

The purpose of this research is to examine strength properties of epoxy-modified mortar with expansive and swelling agent contents. The polymer-modified mortars (PMMs) using epoxy resin are prepared with various polymer-binder ratios, expansive and swelling agent contents. The PMMs using epoxy resin are tested for compressive, flexural and tensile strengths. As a result, the strength properties of the PMMs using epoxy resin are depending on the polymer-binder ratio rather than expansive and swelling agent content, and are remarkably improved over unmodified mortar (UMM).

• Macromolecular Research
• /
• 제16권1호
• /
• pp.45-50
• /
• 2008

This study examined the swelling behavior and in vitro release of a model drug, tetracycline-HCl, from alginate and alginate-polyaspartate (Alg-PASP) composite gel beads. The alginate and Alg-PASP composite beads were prepared using an ionic crosslinking method with aqueous $Ca^{2+}$. Their microporous morphology was observed by scanning electron microscopy. The swelling ratio of the beads in different media varied according to their composition, cross-linking density ($Ca^{2+}$ concentration), and pH of the aqueous medium. The in vitro release experiment of the tetracycline-HCl encapsulated beads in different media suggests that the release of the drug is governed mainly by the swelling properties of the polymer network. The presence of PASP was found to significantly influence the swelling properties and drug release profile.

• 폴리머
• /
• 제37권4호
• /
• pp.478-485
• /
• 2013

본 연구에서는 식품첨가물로 승인되어 있는 생물고분자 물질을 이용하여 신속팽윤성과 고흡수성을 갖는 하이드로젤을 제조하고 팽윤특성을 분석하였다. 하이드로젤을 제조하는 과정에서 기포발생제를 이용하여 기공을 형성시켜 기존 하이드로젤의 팽윤성 향상을 시도하였고 각 하이드로젤의 평형 팽윤도, 팽윤속도 및 세포독성을 비교하였다. Alginate hydrogel에서는 digital microscope 관찰을 통해 수백 ${\mu}m$ 크기의 열린 채널로 다공성 구조를 관찰하였으며 제조된 모든 하이드로젤들은 poly(acrylic acid)에 비해 높은 세포생존율을 보였다.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.15-23
• /
• 2000

Effect of fixation methods on the flame retardant(FR) and performance properties of MDPPA/HMM treated cotton fabrics were studied. Combination of three different fixation methods - premercerization, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton with MDPPA/HMM. As a result, an increase in internal volume of cotton fiber by pre-mercerization and addition of swelling agent, and wet fixation increased %add-on of FR agent improving FR efficiency and wash fastness. Tensile strength of MDPPA/HMM treated cotton fabrics by wet fixation and swelling agent were slightly decreased, but that of premercerized cotton was improved. Wet fixated fabric showed lower bending rigidity and better compressional properties which improved fabric hand. Retention of swelling ability of cotton treated with MDPPA/HMM improved moisture absorption properties.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.26-30
• /
• 2009

To modify and strengthen the properties of PHEMA hydrogel, composite hydrogels containing varying amounts of a Pluronic (PEO-PPO-PEO) component were synthesized by bulk polymerization of HEMA in the presence of Pluronic dimethacrylate under mild photo initiating conditions. The effects of the Pluronic component on gel properties were investigated by measuring the degree of swelling with its temperature responsive behavior, the mechanical properties, and the morphology of the composite hydrogels. With increased Pluronic content, the modified PHEMA hydrogels exhibited an increase in the degree of swelling, and the swelling showed an enhanced thermo-responsive behavior that was completely reversible. In addition, improved mechanical strength and the development of a microporous gel morphology were observed in hydrogels containing Pluronic.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.37-43
• /
• 1994

Commercial Poly(ethylene terephthalate) (PET) filaments were treated in solvents mixtures such as benzyl alcohol/perchloroethylene(BA/PER), benzyl alcohol/trichloroethylene(BA/TRI), benzyl alcohol/ethylene chloride(BA/EC), metha nol/perchloroethylene(ME/PER), and methanol/trichloroethyle(ME/TRI). Swelling of PET in solvent mixtures showed rapidly in the middle range of mixture ratio. Contribution of swelling of each component to total swelling of binary mixtures with increasing treated time was generally showed in proportion to the mixture ratio of the each component in dependence of the extend of swelling.

• 폴리머
• /
• 제35권6호
• /
• pp.520-525
• /
• 2011

초다공성 하이드로젤은 다공성 공극구조를 이용하여 기존 수화젤의 팽윤성을 획기적으로 향상시킨 것으로, 빠른 팽윤거동과 높은 흡수율로 다양한 의약용 응용분야에 유용한 재료이다. 본 연구에서는 장용 코팅제인 Eudragit 계열 고분자들을 사용하여 poly(acrylic acid-co-acrylamide)계 초다공성 하이드로젤을 코팅함으로써 pH 의존성 팽윤거동을 보이는 초다공성 하이드로젤을 제조하고자 하였다. 서로 다른 pH 영역에서 작용하는 Eudragit L100과 S100을 이용하여 딥 코팅에 의해 표면을 코팅한 후 SEM을 이용해 공극구조를 관찰하고 pH에 따른 초다공성 하이드로젤의 팽윤거동을 관찰하였다. Eudragit 계열 고분자들로 코팅된 하이드로젤은 낮은 pH 환경하에서는 팽윤이 억제되다가, 특정 pH 이상에서 팽윤성이 향상되는 pH 의존성 팽윤거동을 보였고, 이러한 pH 의존성은 사용한 장용 코팅제용 고분자들의 pH 특성에 의존하였다.

• 한국광물학회지
• /
• 제30권2호
• /
• pp.71-81
• /
• 2017

회백색 응회암으로 구성된 경주 골굴암 마애불의 효과적인 보존처리를 위하여 구성암석의 특징과 보존처리제 적용에 따른 효과를 살펴보았다. 구성암석은 팽윤성 광물인 몬모릴로나이트를 3-5% 함유하고 있으며, 물과 반응 후 팽윤성 광물의 층간간격이 증가함을 보였다(1.54-2.69%). 에틸실리케이트 암석강화제를 적용한 후 시편의 표면 경도, 흡수율, 공극률 등의 물성은 향상되었으나 팽윤성 광물의 층간간격이 감소하였으며(4.23-12.12%), 팽윤성 광물의 함량이 많을수록 그 정도는 컸다. 팽윤저지제를 선 처리한 후 강화제를 적용하였을 때 물성은 강화제만을 처리하였을 때와 거의 유사한 결과를 보였다. 팽윤저지제만의 처리로는 팽윤성 광물의 층간간격이 거의 변화되지 않았으며, 팽윤저지제 처리 후 강화제를 처리하였을 때는 XRD 패턴에서 팽윤성 광물의 세기는 줄어들었으나 층간간격의 변화는 강화제만을 처리하였을 때와 유사하여 팽윤저지제의 효과는 거의 없었다(4.10-11.85%). 따라서 팽윤성 광물을 함유하고 있는 골굴암 마애불 구성암석을 강화시키기 위한 보존처리제로서 에틸실리케이트 계열의 암석강화제는 적절치 않으며 이를 보완하기 위해 사용한 팽윤저지제도 효과적이지 못하다. 우수의 접촉으로 구성광물이 팽윤되어 풍화가 급속히 진행되기 때문에 현재로서는 하부와 측면 등 풍화가 심한 부분에 우수접촉을 저지시키는 조치가 필요하다.