• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.93-95
• /
• 2005

A new energy-recovery- sustain circuit suitable for a Plasma Display Panel(PDP) application is proposed. The proposed circuit features the low device voltage stresses, essential to design a power efficient and low cost PDP driver circuit. The proposed circuit is demonstrated experimentally for driving a 42 inches plasma display panel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.577-583
• /
• 2011

In AC-PDP, it is necessary to achieve high luminance efficiency, high luminance and high definition by adopting technologies such as high xenon concentration and long gap. However, it is very difficult to apply above technologies because they make many problems such as mis-discharge and high driving voltage. Especially, the reactive power of PDP must be reduced for satisfaction in international standard IEC62087. In this paper, we proposed CLHS driving method which is half sustain driver without energy recovery capacitor. In the experimental results, CLHS driving method reduced reactive power consumption about 10%. Also, CLHS driving method improved the luminance efficiency in all discharge loads. Therefor, the more the discharge load decreases, the more the luminance efficiency improves. When the discharge load is 20%, CLHS driving method improved 5.35%.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.34-38
• /
• 2006

A low cost PDP sustain power supply is proposed based on flyback topology. By using Boundary Conduction Method(BCM) to control input current regulation, DCM condition can be met under all load conditions. Another feature of the proposed method is that a excessive voltage stress due to the link voltage increase can be suppressed by removing link capacitor and suggest new 'Level-shifting switch driver'. this new gate driver is improved 66% of efficiency than switching loss of a existed push-pull amplifier. The proposed converter is tested with a 400W(200V-2A output) prototype circuit.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.11-16
• /
• 2006

A low cost PDP sustain power supply is proposed based on flyback topology. By using Boundary Conduction Method(BCM) to control input current regulation, DCM condition can be met under all load conditions. Another feature of the proposed method is that a excessive voltage stress due to the link voltage increase can be suppressed by removing link capacitor and suggest new 'Level-shifting switch driver'. this new gate driver is improved 66% of efficiency than switching loss of a existed push-pull amplifier. The proposed converter is tested with a 400W(200V-2A output) prototype circuit.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.96-98
• /
• 2005

Proposed Multi-level PDP sustain Driver make use of element which has a low voltage rating instead of suggested method by the existing Webber and it passes through a second phase both rising and falling at sustaining voltage waveform In accordance with the change of timing phase(Tr1, Ti1, Tr2) performance comparison of a electric discharge characteristics in a PDP module has been carried out. At the conclusion of experimentation, the feature is extended by alteration of Ti1 and it has little to do with alteration of Tr1.

• Fisheries and Aquatic Sciences
• /
• v.25 no.2
• /
• pp.101-116
• /
• 2022

The harvesting season of lompa fish, Thryssa baelama, through sasi, indigenous knowledge in resources management, in Haruku Village has become a socio-cultural event that attracts many people. The sasi of lompa fish has been conducted for hundreds of years. Information on the bioecology aspect of lompa fish is limited, while this information is crucial for lompa fish sustainability through the sasi approach. This study aimed to investigate some population parameters of lompa fish, its sustainability status, and proposed a sustainable management strategy for the lompa fishery of Haruku Village. Fish population parameter covers length-weight relationship, growth pattern, size distribution, sex ratio, and the body condition index. The sustainability status was assessed following the Rapfish approach. Fisheries management strategy was performed using a conceptual model framework based on Driver Pressure State Impact Response. The research shows that the total length varies between 9.2-14.3 cm. A high relationship was found between total length and weight, and the growth pattern was an allometric negative. There was a difference in sex ratio between males and females, with females dominant. The body condition index varies over time, probably due to reproductive status. The overall sustainability status was at fair condition (61.60%), with the ecological domain having the highest sustainable status (71.07%) and considered sustain. In comparison, the technological domain had the lowest sustainability status (52.58%) and was considered fair sustain. There were seven management strategies proposed for sustainable management for the lompa fishery.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.177-185
• /
• 2005

A new high efficiency DC/DC converter is proposed, which is derived from the conventional asymmetric half-bridge converter. Because the proposed converter has better ZVS condition compared with the conventional asymmetric half-bridge converter, it shows a high efficiency along the wide load range. In this paper, the basic operations of the proposed converter is analyzed and compared with that of the conventional half-bridge converter, and the excellent performance of the proposed converter is verified by the experimental results with the 425W, 385-170Vdc prototype of the power supply for PDP (Plasma Display Panel) Sustain Driver of PDP TV.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.27-33
• /
• 2007

A novel priming discharge technique in which the ramp shaped priming pulse is superposed on the sustain period so that the entire plasma display panel (PDP) is discharged at the same time with a single drive circuit is proposed. From the experimental results, it is ascertained that the priming discharge is ignited only in a pixel in which sustain discharge does not occur and it has been understood that the priming pulse hardly influences the sustain discharge. Moreover, high-speed driving with address pulse widths of 0.7[${\mu}s$] was achieved and a wide address voltage margin of 40[V] was obtained by using the drive method applied the proposed priming discharge technique. In these results, full-HDTV PDP with 1080 horizontal scanning lines can be driven without decreasing the brightness and the possibility of the commercializing is also high because this technology is designed for using the commercialized driver IC.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.181-187
• /
• 2016

Typical Retro-reflectors installed on road have problems such as limiting a driver's visibility at night when it is foggy or rainy. On the other hand, LED illuminated studs, called cat's eye system, extends a driver's visibility under these conditions. In this paper, we present a design of the LED cat's eye system using solar energy that can sustain vehicles with about 30-ton weight and is compliant with the IP68 code for water proof as IEC standard 60529. In addition, we propose a scheme of designing a LED driving circuit consuming low power to take into accounts cold weather or rainy season with limited sunlight. This LED cat's eye studs is currently installed and used on expressway and bike route nationally as well as overseas.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.364-368
• /
• 2004

A new high efficiency DC/DC converter is proposed, which is derived from the conventional half-bridge converter. The proposed converter has good ZVS condition compared with the conventional half-bridge converter, and shows a high efficiency by solving the unbalance voltage stress and current stress problem of secondary rectifier diode of the conventional half-bridge converter. In this paper, the basic operations of the proposed converter is analyzed compared with that of the conventional half-bridge converter, and the excellent performance of the proposed converter is verified by the experimental results with the 42W prototype of the power supply for PDP Sustain Driver.