• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.171-181
• /
• 2012

As a sub-system of an air traffic control system, SDP(Surveillance Data Processor) provides with the system tracks of aircraft using the surveillance sensor data from various air traffic surveillance sensors, such as radars. Therefore, the high accuracy of tracking results is a crucial requirement for safe flights, and verification of the required system performance of SDP is an essential step in development. Moreover, the quantitative evaluation of target tracking accuracy is important for newly developed SDP, since there are several tracking methods for Multi-Sensor Multi-Target Tracking, such as MRT(Multi Radar Tracking), inevitably required as the main function of SDP. In this study, definition of required system performances, establishment of test environment, and test results for MRT performance evaluation of SDP, which is being developed in KARI(Korea Airspace Research Institute) are presented.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1187-1188
• /
• 2007

Most of the surveillance systems are based on CCTV, closed circuit Television. A surveillance system for urban transit is also based on CCTV. Urban transit operation corporations have a CCTV system and a lot of cameras to monitor the situation for the passengers, and the important facilities. But this system has some problems that it cannot respond to a state of emergency immediately. In this paper, we describe a configuration of an intelligent surveillance system for urban transit to solve that problems. Our proposed configuration include a camera with some intelligent module, and a processor to integrate various data from not only cameras, but also sensors such as a temperature sensor, a heat sensor, sound sensor and etc. and some other data generator. This system configuration can decide the state of the passengers and the facilities. The surveillance system with this configuration can available with the existing surveillance system without a considerable improvement.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.6
• /
• pp.161-169
• /
• 2011

Recent intelligent video surveillance system asks for development of more advanced technology for analysis and recognition of video data. Especially, machine learning algorithm such as Support Vector Machine (SVM) is used in order to recognize objects in video. Because SVM training demands massive amount of computation, parallel processing technique is necessary to reduce the execution time effectively. In this paper, we propose a parallel processing method of SVM training with a multi-core processor. The results of parallel SVM on a 4-core processor show that our proposed method can reduce the execution time of the sequential training by a factor of 2.5.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.91-94
• /
• 2010

본 논문에서는 SDP 시스템이 충족해야 할 요구 규격을 검증하기 위하여 시험 환경 구축 방안을 제안하였다. SDP 시험 환경은 기능/성능/안정성 시험을 수행할 수 있도록 기존 항공관제시스템의 서브 시스템들과 동일한 기능을 수행하는 Simulation System들과 항적 추적 성능을 검증하기 위한 Eurocontrol의 SASS-C와 SMART 시스템으로 구축하였다. 또한 SDP 시험에 있어 Test Case 및 Test Procedure를 구성하여 SDP 요구 규격에 대한 정확한 검증을 수행할 수 있도록 시험 절차를 정의하였다. 제안된 시험 환경 및 시험 절차는 모의 시험을 통해 소프트웨어 구현 과정에서의 시스템 요구 규격에 대한 충족도를 보다 높일 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.205-208
• /
• 2002

The stand-alone transmission system design on compressed still image using DSP processor and Wavelet is presented. The target system is based on 32bits DSP processor. The image is compressed with Wavelet. The system for NTSC format image signal is able to transmit still image data to be high speed and is applicable to a surveillance and inspection system independently.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1045-1052
• /
• 2021

Modern Warfare is transforming into a Network Centric Warfare(NCW) where surveillance systems, command control systems and strike systems are interconnected with advanced IT technologies to share battlefield situations. The South Korean military is using the various tactical data links(TDL) such as Link-K, Link-16, Link-11 and KVMF depending on each military's battlefield situation. Joint Tactical Data Link System(JTDLS) is a system thar shares tactical information in near-real time between army/navy/air joint forces and additionally establishes Link-22 in Link-K, Link-16 and KVMF. In this paper, we propose the Link-22 system structure, Link-22 message analysis and the interface structure between the tactical data link processor and Link-22 to apply Link-22 to the JTDLS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3475-3489
• /
• 2014

Here we present a simple flame detection method for an infrared (IR) thermal camera based real-time fire surveillance digital signal processor (DSP) system. Infrared thermal cameras are especially advantageous for unattended fire surveillance. All-weather monitoring is possible, regardless of illumination and climate conditions, and the data quantity to be processed is one-third that of color videos. Conventional IR camera-based fire detection methods used mainly pixel-based temporal correlation functions. In the temporal correlation function-based methods, temporal changes in pixel intensity generated by the irregular motion and spreading of the flame pixels are measured using correlation functions. The correlation values of non-flame regions are uniform, but the flame regions have irregular temporal correlation values. To satisfy the requirement of early detection, all fire detection techniques should be practically applied within a very short period of time. The conventional pixel-based correlation function is computationally intensive. In this paper, we propose an IR camera-based simple flame detection algorithm optimized with a compact embedded DSP system to achieve early detection. To reduce the computational load, block-based calculations are used to select the candidate flame region and measure the temporal motion of flames. These functions are used together to obtain the early flame detection algorithm. The proposed simple algorithm was tested to verify the required function and performance in real-time using IR test videos and a real-time DSP system. The findings indicated that the system detected the flames within 5 to 20 seconds, and had a correct flame detection ratio of 100% with an acceptable false detection ratio in video sequence level.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2011

In order to performing the joint operation of Korean army efficiently, informations about surveillance, reconnaissance, and situation awareness need to be possessed jointly. In the first development phase (basis type) of the Korean joint tactical data link system (JTDLS-K), essential tactical information and recognized situation are owned among platforms in common by using existing wireless terminals. In the second development phase (completion type) of the JTDLS-K, a JTDLS which can perform network centric warfare (NCW) will be developed in due consideration of technology development of the basis type and common technology maturity degree. This is a joint battlefield system that can show fighting power simultaneous and polysynthetically through providing command and control messages effectively to each platform, which is participating in the joint and combined operations. In this paper, the development of JTDLS-K with a common data processor based on common link integration processing (CLIP) is described. From the test results of the system presented in this paper, it is demonstrated that quadrature phase shift keying (QPSK) signals can be applied to the system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.263-269
• /
• 2010

This paper describes real-time detection and tracking of moving objects for unmanned visual surveillance. Using images obtained from the fixed camera it detects moving objects within the image and tracks them with displaying rectangle boxes enclosing the objects. Tracking method is implemented on an embedded system which consists of TI DSK645.5 kit and the FPGA board connected on the DSP kit. The DSP kit processes image processing algorithms for detection and tracking of moving objects. The FPGA board designed for image acquisition and display reads the image line-by-line and sends the image data to DSP processor, and also sends the processed data to VGA monitor by DMA data transfer. Experimental results show that the tracking of moving objects is working satisfactorily. The tracking speed is 30 frames/sec with 320x240 image resolution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2100-2106
• /
• 2016

The automation system uses PLC to monitor the manufacturing process status of the production product and processes the sensor information transmitted from the sensor. In this paper, we propose a remote surveillance system to monitor the status of control relay used in automation system. The proposed system consists of a control relay module, a one-chip processor module, a computer monitoring system, and a database system that inputs and manages the details of the control relay. The computer monitoring system is configured to monitor the operating condition and life time of the control relay. The database is configured so that the input date of the control relay can be input and corrected, and the operating state information of the control relay can be automatically printed. In the remote monitoring system, the failure status of the control relay is recognized in real time, and the time required for normal operation can be minimized by quickly replacing faulty parts.