• 멤브레인
• /
• 제28권3호
• /
• pp.169-179
• /
• 2018

본 연구는 역삼투막의 물리-화학적 표면 개질을 통하여 친수성 증가에 따른 내오염성 및 내염소성을 향상하고자 하였다. 자외선조사로 상용막 표면을 활성화한 후 실란 커플링제를 sol-gel법으로 개질하여 염소에 대한 민감도를 낮춰 폴리아마이드 활성층을 보호하여 내염소성을 향상시켰다. 또한, 에폭사이드의 개수가 다른 PGPE, SPE 두 종류의 에폭시로 코팅 후 에폭사이드의 개환반응으로 내오염성을 향상시켰으며, 표면 개질 조건은 접촉각과 FT-IR, XPS 분석을 통해 최적화하였다. 실란-에폭시 개질막의 오염성 평가 결과 투과도 감소율이 상용막보다 약 1.5배 감소하였고, 내염소성 평가 결과 $20,000ppm{\times}hr$에서도 염제거율이 90% 이상 유지되었다.

• Membrane and Water Treatment
• /
• 제3권1호
• /
• pp.35-49
• /
• 2012

In membrane processes, various agents are used to enhance, protect, and recover membrane performance. Applying these agents in membrane modification could potentially be considered as a simple method to improve membrane performance without additional process. Citric acid (CI) and sodium bisulfite (SB) are two chemicals that are widely used in membrane feed water pretreatment and cleaning processes. In this work, preadsorptions of CI and SB were developed as simple methods for polysulfone ultrafiltration membrane modification. It was found that hydrogen bonding and Van Der Waals attraction could be responsible for the adsorptions of CI and SB onto membranes, respectively. After modification with CI or SB, the membrane surfaces became more hydrophilic. Membrane permeability improved when modified by SB while decreased a little when modified by CI. The modified membranes had an increase in PEG and BSA rejections and better antifouling properties with higher flux recovery ratios during filtration of a complex pharmaceutical wastewater. Moreover, membrane chlorine tolerance was elevated after modification with either agent, as shown by the mechanical property measurements.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• 멤브레인
• /
• 제23권6호
• /
• pp.439-449
• /
• 2013

본 연구는 상용화된 방향족 폴리아미드 역삼투막에 diphenylamine (DPA)을 표면개질 시킴으로써 내염소성과 내오염성이 향상된 역삼투 복합막을 제조하고 최적화시키는 방법에 대해서 연구하였다. 역삼투막의 내염소성과 내오염성을 증가시키기 위해 반응성이 뛰어난 아민(amine)기를 가지고 있고 열적 화학적 안정성이 뛰어난 페닐기 2개가 있는 DPA를 사용하였고, 개질 온도와 시약 농도를 변화시켜가며 개질 조건을 최적화시켰다. XPS, AFM 그리고 contact angle을 이용하여 역삼투막의 표면 개질을 통한 표면 특성 변화를 확인하였으며 역삼투막의 투과성능 평가 결과 역삼투막의 내염소성과 내오염성이 향상된 역삼투 분리막을 제조하였다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.212-219
• /
• 2018

Perovskite type ceramic membranes which exhibit dual ion conduction (proton and oxygen ion conduction) can permeate water and can aid solving operational problems such as temperature gradient and carbon deposition associated with a working solid oxide fuel cell. From this point of view, it is crucial to reveal water transport mechanism and especially the nature of the surface sites that is necessary for water incorporation and evolution. $BaCe_{0.8}Y_{0.2}O_{3-{\alpha}}$ (BCY20) was used as a model proton and oxygen ion conducting membrane in this work. Four different catalytically modified membrane configurations were used for the investigations and water flux was measured as a function of temperature. In addition, CO was introduced to the permeate side in order to test the stability of membrane against water and $CO/CO_2$ and post operation analysis of used membranes were carried out. The results revealed that water incorporation occurs on any exposed electrolyte surface. However, the magnitude of water permeation changes depending on which membrane surface is catalytically modified. The platinum increases the water flux on the feed side whilst it decreases the flux on the permeate side. Water flux measurements suggest that platinum can block water permeation on the permeate side by reducing the access to the lattice oxygen in the surface layer.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.263-268
• /
• 2012

It is important to know the mechanism of cell membrane fluctuation because it can be readout for the nanomechanical interaction between cytoskeleton and plasma membrane. Traditional techniques, however, have drawbacks such as probe contact with the cell surface, complicate analysis, and limit spatial and temporal resolution. In this study, we developed a new system for non-contact measurement of nano-scale localized-cell surface dynamics using modified-scanning ion-conductance microscopy. With 2 nm resolution, we determined that endothelial cells have local membrane fluctuations of ~20 nm, actin depolymerization causes increase in fluctuation amplitude, and ATP depletion abolishes all membrane fluctuations.

• 전기화학회지
• /
• 제17권2호
• /
• pp.94-102
• /
• 2014

바나듐 레독스 흐름 전지 (Vanadium redox flow battery, VRB) 시스템 운전 중 양이온 교환막을 통한 바나듐이온의 투과로 인하여 성능이 저하되는 문제점을 보완하기 위해 판상형태의 탄소물질인 산화그라핀 (Graphene Oxide, GO)을 기존에 사용하였던 양이온 교환막인 Nafion 양이온 교환막 표면에 열압착 방식으로 코팅하여 양이온 교환막 개선 및 VRB 성능 향상을 도모하였다. 개선된 양이온 교환막의 물리화학적 특성분석을 위하여 SEM (Scanning Electron Microscopy)분석, 이온 교환 용량, 수분 흡수 및 수소이온 전도도를 측정하였다. 산화그라핀층을 코팅한 결과, SEM 분석을 통해 양이온 교환막 표면에 약 $0.93{\mu}m$의 산화그라핀층이 형성된 것을 확인할 수 있었다. 산화그라핀을 코팅하여 개선된 양이온 교환막의 수소이온 전도도 측정 결과, 상용 양이온 교환막의 27% 수준으로 감소하였음을 확인하였으며, 동시에 바나듐이온 투과실험을 실시한 결과, 개선된 양이온 교환막의 바나듐이온 투과도가 기존 상용 양이온 교환막의 25% 이하 수준으로 감소하였음을 확인할 수 있었다. VRB 단위전지 성능실험을 실시하여 충-방전 특성을 분석한 결과, 산화그라핀을 코팅하여 개선된 양이온 교환막을 VRB 시스템에 적용하였을 경우, 바나듐이온의 투과도 감소로 인하여 쿨롱효율이 증가하였음을 확인할 수 있었고, 그로 인하여 전체적인 에너지효율이 상용막을 적용하였을 때 보다 증가하였음을 확인할 수 있었다. 따라서, 본 연구를 통해 양이온 교환막 표면에 판상형태의 탄소물질인 산화그라핀을 코팅하는 방법이 바나듐이온 투과도를 저하시키고 VRB의 시스템성능을 향상시킬 수 있는 효과적인 방법임을 제시할 수 있었다.

• Membrane and Water Treatment
• /
• 제1권1호
• /
• pp.83-92
• /
• 2010

To improve the antifouling characteristics of polypropylene hollow fiber microporous membranes in a submerged membrane-bioreactor for wastewater treatment, the surface-modification was conducted by Ar plasma treatment. Surface hydrophilicity was assessed by water contact angle measurements. The advancing and receding water contact angles reduced after the surface modification, and hysteresis between the advancing and receding water contact angles was enlarged after Ar plasma treatment due to the increased surface roughness after surface plasma treatment. After continuous operation in a submerged membrane-bioreactor for about 55 h, the flux recovery after water cleaning and the flux ratio after fouling were improved by 20.0 and 143.0%, while the reduction of flux was reduced by 28.6% for the surface modified membrane after 1 min Ar plasma treatment, compared to those of the unmodified membrane. Morphological observations showed that the mean membrane pore size after Ar plasma treatment reduced as a result of the deposition of the etched species; after it was used in the submerged membrane-bioreactor, the further decline of the mean membrane pore size was caused by the deposition of foulants. X-ray photoelectron spectroscopy and infrared spectroscopy confirmed that proteins and polysaccharide-like substances were the main foulants in the precipitate.

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.311-318
• /
• 2000

To improve $CO_2$pemselectivity, a modified silica membrane was prepared by chemical vapor deposition with tetraethoxysilane(TEOS)-ethanol-water, and TEOS-ethanol-water-HCI solution at 300-$600^{\circ}C$. The silica was effectively deposited in the mesopores of a ${\gamma}$-alumina film coated on a porous $\alpha$-alumina tube by evacuating the reactants through the porous wall. In this membrane, $CO_2$interacts, to some extent, with the pore wall, and $CO_2$/$N_2$selectivity then exceeds the value of the Knudsen diffusion mechanism, while the membrane derived from TEOS alone has no $CO_2$selectivity. The silica membrane prepared from TEOS-ethanol-water-HCI solution showed that $CO_2$permeance was $2.5$\times$10^{-7}mol/s^{-1}.m^{-2}.Pa^{-1} at 30{\circ}C$ and $CO_2$/$N_2$selectivity was approximately 3. The $CO_2$permeance and selectivity was improved by enlarging the surface diffusion with modification of chemical affinity of the silica pores.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2010

A highly performed Pd-based hydrogen membrane has prepared successfully on a modified porous nickel support. The porous nickel support modified by impregnation method of $Al(NO_3)_3{\cdot}9H_2O$ (Aldrich Co.) over the nickel powder showed a strong resistance to hydrogen embrittlement and thermal stability. Plasma surface modification treatment was introduced as a pre-treatment process instead of conventional HCl wet activation. Ceramic barrier was coated on the external surface of the prepared nickel supports to prevent intermetallic diffusion and to enhance the affinity between the support and membrane. Palladium and copper were deposited at thicknesses of $4\mu}m$ and $0.5{\mu}m$, respectively, on a barrier-coated support by DC sputtering process. The permeation measurement was performed in pure hydrogen at $400^{\circ}C$. The single gas permeation of our membrane was two times higher than that of the previous membrane which do not have ceramic barrier.