• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4378-4384
• /
• 2012

LED 칩 패키징에서 다이 본딩은 웨이퍼에서 분할된 다이를 리드 프레임에 접착제로 고정시켜 칩이 다음 공정을 견딜 수 있는 충분한 강도를 제공하는 중요한 공정이다. 본 논문에서는 PLCC 구조 LED 패키지 프레임에 소형 제너 다이오드를 부착하는 다이 본딩 공정능력의 최적화를 위하여 공정에 영향을 미치는 여러 인자를 분석하여 반응표면분석법을 적용하여 그 결과를 도출하였다. 인자를 분석하여 5인자 3수준 4반응치를 고려하여 실험계획법을 수립하였으며, 그 결과 모든 반응치의 목표를 만족하는 최적 조건을 확보할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2157-2161
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved blades centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k-e turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in forward-curved blades centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.309-315
• /
• 2018

Chlortetracycline (CTC) is one of the most important compounds in antibiotic production, and its distribution has been widely investigated due to health and ecological concerns. This study presents systematic approach to optimize the high-performance liquid chromatography-tandem mass spectrometry for analyzing CTC in a multiple reaction monitoring mode ($479{\rightarrow}462m/z$). One-factor-at-a-time (OFAT) test with response surface analysis (RSA) was used as optimization strategy. In OFAT tests, the fragmentor voltage, collision energy, and ratio of acetonitrile in the mobile phase were selected as major factors for RSA. The experimental conditions were determined using a composite in cube design (CCD) to maximize the peak area. As a result, the partial cubic model precisely predicted the peak area response with high statistical significance. In the model, the (solvent composition) and (collision $energy^2$) terms were statistically significant at the 0.1 ${\alpha}$-level, while the two-way interactions of the independent variables were negligible. By analyzing the model equation, the optimum conditions were derived as 114.9 V, 15.7 eV, and 70.9% for the fragmentor voltage, collision energy, and solvent composition, respectively. The RSA, coupled with the CCD, offered a comprehensive understanding of the peak area that responds to changes in experimental conditions.

• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.745-752
• /
• 2009

이 논문에서는 과산화수소를 사용한 경량기포콘크리트의 최적배합비를 제안하고 있다. 최적배합을 도출하기 위해 상용프로그램인 MINITAB을 사용하여 실험계획법을 적용하였다. 통계적 분석방법은 반응표면분석법 중 하나인 Box Behnken(B-B)계획법으로 하였다. 실험시 고려한 영향인자로는 단위시멘트량, 물시멘트비, 과산화수소비를 설정하였다. 분산분석에 따르면 경화상태에서 경량기포콘크리트의 물시멘트비와 과산화수소비는 절건밀도, 압축강도, 휨강도에 유의차가 있고, 단위시멘트량은 절건밀도에만 유의차가 있는 것으로 나타났다. 반응표면분석의 결과에서 과산화수소를 사용한 경량기포콘크리트의 최적배합비는 단위시멘트량 800 kg/$m^3$, 물시멘트비 44.33%, 과산화수소비 10%로 도출되었다.

• 대한기계학회논문집B
• /
• 제30권7호
• /
• pp.603-611
• /
• 2006

This paper presents the response surface optimization method using three-dimensional Wavier-Stokes analysis to optimize the blade shape of an axial flow fan. Reynolds-averaged Wavier-Stokes equations with $k-{\epsilon}$ turbulence model are discretized with finite volume approximations using the unstructured grid. Regression analysis is used for generating response surface, and it is validated by ANOVA and t-statistics. Four geometric variables, i.e., sweep and lean angles at mean and tip respectively were employed to improve the efficiency. The computational results are compared with experimental data and the comparisons show generally good agreements. As a main result of the optimization, the total efficiency was successfully improved. Also, detailed effects of sweep and lean on the axial flow fan are discussed.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.107-113
• /
• 2004

This paper presents the pillar section optimization technique considering the reliability of the vehicle body structure consisted of complicated thin-walled panels. The response surface method is utilized to obtain the response surface models that describe the approximate performance functions representing the system characteristics on the section properties of the pillar and on the mass and the natural frequencies of the vehicle B.I.W. The reliability-based design optimization on the pillar sections Is performed and compared with the conventional deterministic optimization. The FORM is applied for the reliability analysis of the vehicle body structure. The developed optimization system is applied to the pillar section design considering the fundamental natural frequencies of passenger car body structure. By applying the proposed RBDO technique, it can be possible to optimize the pillar sections considering the reliability that engineers require.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1307-1313
• /
• 2002

This study was performed to investigate the single and combined effect of concentrations of garlic juice according to the pH and temperature on the growth of Salmonella enteritidis in brain heart infusion broth, and to develope Response surface model for the effect of concentrations of garlic extract. The results of electric conductibility of Salmonella enteritidis growing in the range of incubation temperature ($25~42^{\circ}C$), pH (5.5~9.0) and concentration of garlic Juice (0~0.8%) showed that a badge with high temperature had low D.T.value and concentration of garlic extract were significantly correlated with D.T.value (p<0.01). Growth of Salmonella enteritidis in the condition of $37^{\circ}C$ and pH 7.0 presented the lowest D.T.value.

• 대한기계학회논문집A
• /
• 제30권2호
• /
• pp.135-140
• /
• 2006

In tapping mode atomic force microscopy (TM-AFM), the vibro-contact response of a resonating tip is used to measure the nanoscale topology and other properties of a sample surface. However, the nonlinear tipsurface interactions can affect the tip response and destabilize the tapping mode control. Especially it is difficult to obtain a good scanned image of high adhesion surfaces such as polymers and biomolecules using conventional tapping mode control. In this study, theoretical and experimental investigations are made on the nonlinear dynamics and control of TM-AFM. Also we report the surface adhesion is an additional important parameter to determine the control stability of TM-AFM. In addition, we proved that it was adequate to use Johnson-Kendall-Roberts (JKR) contact model to obtain a reasonable tapping response in AFM for the soft and high adhesion samples.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.578-582
• /
• 2004

This paper presents the response surface optimization method using three-dimensional Navier-Stokes Analysis to optimize the shape of a axial flow fan. Reynolds-averaged Navier-Stokes equations with k-$\epsilon$ turbulence model are discretized with finite volume approximations. Regression analysis is used for generating response surface, and it is validated by ANOVA. Five geometric variables, i.e., distribution of sweep angle at mean and tip, lean angle at mean and tip, and spanwise location of mean were employed to optimize the efficiency. The computational results are compared with experiment data. As a main result of the optimization, the efficiency was successfully improved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.755-761
• /
• 2003

Recently, the development of mobile devices demands information storage systems to use micro drive devices and cheap media. These should have several characteristics, for example, the subminiature of size, the robustness of shock, the minimum of cost and power consumption, and the removability of multiple applications. A conventional optical disk drive is more suitable for these specifications than the others. The optical storage system of the new generation to use a blue laser and a high numerical aperture (NA) is the perfect candidate for micro optical disk drives. In this paper, the micro actuator that can be applied to a micro optical disk drive is designed by response surface methodology to use a structural analysis and an electro-magnetic analysis. Based on above results, the coarse actuator and fine actuator are designed and improved from the point of view of the size and the power. Consequently, the designs of a micro actuator are proposed through these courses.