• 한국환경과학회지
• /
• 제28권12호
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• 대한기계학회논문집B
• /
• 제40권7호
• /
• pp.441-448
• /
• 2016

프로펠러에 의한 추력은 유체의 유입 속도와 익의 회전속도에 의해 생성되며 그 성능을 전진비, 추력계수, 동력계수와 같은 무차원수로 나타내고 있다. 이 연구에서 회전체의 성능을 분석하기 위한 수치적 방법으로 STL형식의 회전체 형상을 인식할 수 있는 가상경계법을 적용한 격자볼쯔만법을 제안한다. 이 가상경계법으로 프로펠러의 회전에 의한 유동을 구현하기 위해서 프로펠러의 표면 격자점에서 속도와 유동장의 격자점에서 유속의 차를 이용하여 계산한 체적력을 볼쯔만방정식의 외력항으로 적용하게 된다. 제안한 방법을 검증하기 위하여 4개의 익을 가지고 있는 프로펠러를 이용해 레이놀즈수가 100, 500, 1000이고 전진비가 0.2~1.4일 때 유동해석을 수행하였으며 그 결과로 부터 전형적인 프로펠러의 성능특성을 얻을 수 있었다. 높은 레이놀즈수와 전진비를 갖는 유동에서 해석 안정성을 확보하기 위해서는 익의 표면에 구성한 최대 격자의 크기와 유동장에 구성한 격자 크기의 비가 3 이하로 유지해야 하며 충분히 긴 후류영역을 확보할 필요가 있다.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.95-101
• /
• 2002

고농도의 오존발생에 영향을 주는 많은 변수들이 존재한다. 이러한 변수들은 오존발생장치 설계시 매우 중요한 요소가 되고 설계전에 반드시 고려되어야 할 것들이다. 오존발생장치 설계 후에도 고농도 오존발생에 크게 영향을 주는 주변변수들이 있다. 본 연구에서는 오존발생에 영향을 주는 많은 주변변수들중에서 입력산소가스의 유량과 여기에 첨가되는 첨가가스가 고농도의 오존발생에 미치는 영향을 조사하였다. 결과적으로, 입력산소가스의 유량을0.75[LPM］～2.00[LPM］으로 변화시키면서 오존농도를 측정한 결과 1.25［LPM］에서 71145［ppm］의 최대오존발생량을 보여주었다. 입력산소가스에 첨가되는 질소가스의 유량을 0.0［vol%］～6.4［vol%］으로 변화시켜가면서 발생되는 오존농도를 측정한 결과 첨가되는 질소가스량이 0.8［vol%］인 경우 최대 73135［ppm]의 오존을 얻을 수 있었다. 이것은 순수산소만을 입력가스로 사용했을 때보다 최대오존발생량이 3［%］가량 증가한 결과이다. 입력산소가스에 첨가되는 아르곤가스의 유량을 0.0[vol%］～6.4[vol％］으로 변화시켜가면서 발생되는 오존농도를 측정한 결과 첨가되는 아르곤가스량이 0.8［vol%］인 경우 최대 67288［ppm］의 오존을 얻을 수 있었다.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2003년도 공동학술발표회 논문집
• /
• pp.66-66
• /
• 2003

King George island, Antarctica, is mostly covered by ice sheet and glaciers, but the land area is focally exposed for several thousand years after deglaciation. For a mineralogical study of chemical weathering in the polar environment, glacial debris was sampled at the well-developed patterned ground which was formed by long periglaclal process. As fresh equivalents, recently exposed tills were sampled at the base of ice cliff of outlet glaciers and at the melting margin of ice cap together with fresh bedrock samples. Fresh tills are mostly composed of quartz, plagioclase, chlorite, and illite, but those derived from hydrothermal alteration zone contain smectite and illite-smectite. In bedrocks, chlorite was the major clay minerals in most samples with minor illite near hydrothermal alteration zone and interstratified chlorite-smectite in some samples. Smectite closely associated with eolian volcanic glass was assigned to alteration in their source region. Blocks with rough surface due to chemical disintegration showed weathering rinds of several millimeter thick. Comparision between inner fresh and outer altered zones did not show notable change in clay mineralogy except dissolution of calcite and some plagioclase. Most significant weathering was observed in the biotite flakes, eolian volcanic glass, sulfides, and carbonates in the debris. Biotite flakes derived from granodiorite were altered to hydrobiotite and vermiculite of yellow brown color. Minor epitactic kaolinite and gibbsite were formed in the cleaved flakes of weathered biotite. Pyrite was replaced by iron oxides. Calcite was congruently dissolved. Volcanic glass of basaltic andesite composition showed alteration rim of several micrometer thick or completely dissolved leaving mesh of plagioclase laths. In the alteration rim, Si, Na, Mg, and Ca were depleted, whereas Al, Ti, and Fe were relatively enriched. Mineralization of lichen and moss debris is of much interest. They are rich of A3 and Si roughly in the ratio of 2:1 to 3:1 typical of allophane. In some case, Fe and Ti are enriched in addition to Al and Si. Transmission electron microscopy of the samples rich of volcanic glass showed abundant amorphous aluminosilicates, which are interpreted as allophane. Chemical weathering in the King George Island is dominated by the leaching of primary phyllosilicates, carbonates, eolian volcanic glass, and minor sulfides. Authigenesls of clay minerals is less active. Absence of a positive evidence of significant authigenic smectite formation suggests that its contribution to the clay mineralogy of marine sediments are doubtful even near the maritime Antarctica undergoing a more rapid and intenser chemical weathering under more humid and milder climate.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.697-706
• /
• 2019

다상흐름 모델링 기법과 하이브리드 난류 모델링 기법을 결합한 수치모형을 이용하여 사각형 수로에서의 중력류를 수치모의 하였다. 이 연구에서 적용한 다상흐름 해석기법은 밀도가 큰 중력류 유체, 상대적으로 밀도가 작은 주변류 유체 그리고 자유수면 위에서 흐르는 공기를 3개의 상으로 처리하며, 각 상에 대해서 분리된 흐름 지배방정식을 적용한다. 난류흐름은 벽경계 근처에서는 RANS 모드로 모의하고 벽에서 떨어진 영역에서는 LES 모드로 해석하는 하이브리드 RANS/LES 방법의 일종인 IDDES 기법을 이용하여 해석한다. 이 연구에서 적용한 모델링 기법은 중력류의 머리의 전파속도를 실험값과 일치하게 잘 예측하는 것으로 나타났다. 수치해석 결과는 아울러 낮은 레이놀즈수 난류모형을 이용한 RANS 수치모의에서 이용되는 정도의 격자해상도에서도 큰 규모의 Kelvin-Helmholtz 형식의 경계면 와의 발달과 이들 와가 지속적으로 3차원 형식의 붕괴를 거쳐 작은 난류구조로 분해되면서 난류에너지가 소산되는 현상을 성공적으로 예측함을 보여준다. 적용한 수치모의 기법은 공학적으로 접근 가능한 격자해상도에서 돌출-쪼개짐 흐름 불안정을 동반한 중력류 머리부분의 3차원 거동 특성을 잘 재현하며, 이 결과는 보다 높은 격자해상도에서 구해진 LES 결과에 상응하는 것으로 나타났다. 이 연구결과는 하이브리드 난류모델링 기법과 다상흐름 해석기법을 병합한 수치모형이 자연상태에서 복잡한 중력류의 물리적 거동을 예측하는데 공학적으로 유망한 방법임을 보여준다.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.323-328
• /
• 2019

기존에는 지형에 대한 3차원 공간정보 구축을 위해 주로 토털스테이션을 이용한 현황측량, 원격탐사, GNSS(Global Navigation Satellite System) 등의 방법이 주로 활용되어 왔다. 하지만 토털스테이션이나 GNSS는 대상지에 접근과 많은 관측을 요구하기 때문에 작업효율과 경제성이 떨어지며, 항공사진이나 인공위성영상은 지형의 3차원 형상을 취득하기 어렵다는 단점이 있다. 지상 LiDAR(Light Detection And Ranging)는 측정 대상물에 무수히 많은 레이저를 주사하여 X, Y, Z 좌표와 형상에 대한 정보를 얻을 수 있으며, 자료처리의 자동화가 가능한 장점이 있다. 본 연구에서는 지상 LiDAR를 이용하여 사면의 변위를 검출하고자 하였다. 연구대상 사면 3개소를 선정하고, 2016년과 2017년에 대상 사면에 대한 자료를 취득하였으며, 자료 처리를 통해 경사면의 형상과 단면에 대한 데이터를 생성할 수 있었다. 또한 생성된 데이터의 중첩분석을 통해 효과적으로 사면의 변위가 0.1m 이내임을 파악함으로써, 위험사면의 관리를 위한 지상 LiDAR의 활용 가능성을 제시하였다. 향후 주기적인 데이터 취득 및 분석이 이루어진다면 지상 LiDAR를 이용한 방법은 효과적인 위험사면 관리에 기여할 것이다.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.138-144
• /
• 2023

본 연구에서는 알칼리 침출수의 수서환경 완화를 위한 전기화학적 처리에 대한 효과를 평가하였다. 시멘트 페이스트의 표면을 개질하기 위해 1,000 mA/m² 의 직류를 양극 graphite를 통해 외부 메쉬로 4주 동안 통전한 후, 물 속의 알칼리 침출이 자연적으로 치유되는 것을 방지하기 위해 시멘트 페이스트 시편을 밀폐된 상태의 정지된 물에 침지시켰다. 물 속에서 100일간의 모니터링 한 결과, 전기화학적 처리를 한 시편의 pH 값은 약간 증가한 반면, control 시편의 pH의 경우 13.2를 나타내어 훨씬 더 높은 pH값을 나타내었다. 또한, pH 모니터링 이후 시멘트 페이스트 시료에 대한 pH 프로파일은 전기화학적 처리가 시멘트 매트릭스의 높은 알칼리도 확보에 효과적임을 알 수 있었다. 알칼리 침출 공정에서 얻은 알칼리침출수는 다프니아 마그나의 생태학적 테스트에 사용되었다. Control 시편은 표준 Daphnia Magna를 대부분 고정시킨 반면, 전기화학적 처리기법의 경우 생태학적으로 매우 우수하다는 것을 확인하였다.

• Fisheries and Aquatic Sciences
• /
• 제27권4호
• /
• pp.240-255
• /
• 2024

Widas Reservoir is situated in an area of 570 ha in the Pajaran Village, Madiun Regency, East Java Province, Indonesia, playing an essential role in fisheries, with the average fish catch per year of about 283 tons/year. This study explores the standing stock, growth parameters, mortality, and exploitation rates of several dominant fishes in Widas Reservoir. This study was carried out from February to November 2019. Fish stocks were estimated using acoustic tools, fish catch records, and sizes collected by local enumerators. Fish length frequency sampling was conducted on several dominant fish species, such as Oreochromis niloticus, Barbonymus gonionotus, and Osteochilus vittatus. Based on the length-frequency data, estimating fish population dynamics, the fish population dynamics (infinitive length (L_∞) and growth coefficient (K)) estimation was run in a time series using the Fish Sock Analysis Tool, II (FISAT II) program package. Moreover, the estimation of natural mortality parameters, the fishing mortality parameter, and the exploitation rate was also performed. The approximated overall fish stock in the Widas Reservoir was about 79,848 kg, which lowered with the increase in water depth. Of particular concern, in the surface layer at a depth between 1-5 m, the fish stock reached 58,813 kg, while in the deeper zone (> 15 m), the value significantly lowered by about 98%, reaching 1,219 kg. These results indicate an overfishing in the Widas Reservoir. The value of the exploitation rate (E) of B. gonionotus was 0.748, O. niloticus 0.8, and O. vittatus 0.7, respectively, proving the overfishing states occurred in the study area. Therefore, regulations governing the number of catches and the use of fishing gear are crucial in Widas Reservoir, particularly the use of lift and gill nets with a mesh size of less than 2 cm.