• 한국조경학회지
• /
• 제26권2호
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.91-100
• /
• 2008

본 연구는 Cartesian 격자망을 기본으로 하여 복잡한 지형을 위한 격자를 간편하고 효율적으로 생성할 수 있는 기법인 분할격자체계를 제안하고자 한다. 분할격자기법은 전반적인 흐름영역의 격자는 균일한 크기의 Cartesian 격자로 표현하지만 수치모형의 정확성, 적용성 및 효율성을 증대시키기 위하여 흐름의 특성이 변하는 격자를 분할하여 처리하는 기법이다. 분할격자체계에 의한 격자망은 다양한 크기 및 형상을 지니게 되므로, 유한체적기법을 적용하여 복잡한 흐름영역을 위한 수치모형을 구성한다. HLLC Riemann 근사해법을 이용하여 지배방정식을 이산화하였으며, 수치해의 안정성을 기하기 위하여 TVD-WAF기법을 적용하였다. 분할격자체계를 이용한 수치모형을 검증하기 위하여 해석해가 존재하는 사각형수조의 자유진동흐름을 모의하였다. 해석해와 수치모의 결과를 비교하여 본 연구에서 제안된 기법이 균일격자 및 분할격자체계에서 자유수면변위 및 x-축 및 y-축 방향의 유속을 정확히 모의함을 확인하였다.

• 대한치과교정학회지
• /
• 제41권1호
• /
• pp.6-15
• /
• 2011

마이크로 임플란트 시술의 중요한 위험요인 중 하나로 치근접촉 문제가 있으나, 관련 연구는 결과 분석에 치중되어 있고, 치근접촉이 마이크로 임플란트 안정성 상실로 이어지는 기전에 대한 연구는 아직 미흡한 것으로 보인다. 이에, 본 연구에서는 생역학적 측면에서 그 영향을 분석하였다. Absoanchor 마이크로 임플란트(SH1312-7, Dentos Inc., Daegu, Korea) 첨부가 치근에 접촉되어 있을 때, 저작압 전달에 의한 마이크로 임플란트 변위가 인접골에 가하는 압축응력을 축대칭 유한요소모델을 사용하여 계산하였다. 요소별 응력이 해면골의 최대압축강도나, 치밀골의 비정상 골개조 임계능력을 넘을 경우 해당 요소를 순차적으로 해석모델에서 제거하며 실행한 6단계해석의 결과, 마이크로 임플란트에 인접한 해면골의 전체적인 파절과 과부하에 따른 치밀골의 비정상 골개조가 임플란트 지지력 상실에 주 요인이 될 것으로 평가되었다. 치밀골의 과부하 영역은 초기에는 치밀골판의 하부에 존재하였으나 상부로 확장되었고, 응력 재분포로 인한 감소효과 없이 양성 되먹임(positive feedback)으로 결국 치밀골 전 두께로 확대됨을 관찰하였다. 본 연구를 통해 치근접촉된 마이크로 임플란트가 인접골을 훼손시켜 안정성 상실로 이어지는 과정을 모사할 수 있었으며, 이로부터 치근접촉에 따른 마이크로 임플란트의 불량한 예후에 대한 생역학적 측면의 원인을 파악할 수 있었다.

• 한국패류학회지
• /
• 제30권1호
• /
• pp.95-99
• /
• 2014

In the present study, we surveyed the molluscan fauna in a lagoon located near Seong-san harbor on the east coast of Jeju Island in July 2012. For the survey, a $25{\times}25cm$ quadrat was deployed over 3 randomly selected sites in the intertidal area of the lagoon. Sediment from the surface to a depth of 25 cm in the quadrat was removed and sieved using a 1 mm mesh sieve. All molluscan fauna retained on the sieve was identified to the species level. From the survey, 25 species of mollusca belonging to 2 orders and 16 families were identified. Species richness, in terms of total number of species, was found to be the highest at sampling site 1, where the substrate was composed of coarse sand and some rocks, while it was lowest at sampling site 3, composed of compact fine sand. Regardless of the type of substrate at the sampling sites, the mud-creeping snail Batillaria cumingii (Crosse, 1862) occurred at a high density, ranging from $324-468ind./m^2$. The luciniid bivalve Pillucina pisidium also occurred at a high density at sampling site 1, at $336ind./m^2$, while the density of this species was only $4ind./m^2$ at sampling site 3. The Manila clam Ruditapes philippinarum could be found at all 3 sampling sites with very low density ranging from $16-48ind./m^2$. The density and species richness of molluscs observed in this study was lower compared to the previously reported molluscan fauna in Jeju Island, suggesting that further investigation needs to be carried out to conserve the unique marine lagoon ecosystem in Jeju Island.

• 한국지반공학회지:지반
• /
• 제1권1호
• /
• pp.59-72
• /
• 1985

본 논문은 Biot의 압밀이론을 유한요소법에 의해 해석하는 데 있어 수정 Cam-clay model과 해석 기법으로서는 Christian Boehmer방법을 사용한 것이다. 특히 본 해석에 있어서 압밀의 시간간격과 요소의 분할은 정도와 경제성의 관점에서 연구하였다. 나아가 본 프르그램의 정확을 조사하기 인하여 본 프로그램에 Terzaghi의 정해에 의한 일차원추밀의 해석을 시도하여 그 정상성을 확인하고 또한 Magnan이 연구목적으로 수행한 프랑스의 Cubzac-les-ponts에서 시험성토의 결과와 비교하였다. 본 연구에서 얻은 주요결론은 다음과 같다. 1. 일차원압밀의 평우에 배수층에 가까이 갈수록 요소를 세분하면 수치해석에서 더 높은 결과를 얻을 수 있다. 2. 상간간격에 대해서는 1 log cycle당 20회로 하면 안정된다. 3. 긴 배수거리를 갖는 요소에서는 Mandel-cryer 효과가 시간지연과 더불어 일어난다. 4. 본 프로그램에 의해 예측된 초기하중 단계에서 축변위는 성토하중으로 산하는 것 보다도 강성을 주는 Mesh화한 것이 관측치와 잘 일치한다. 5. 본 프로그램에 의해 예측된 간극수압은 Magnan결과와 비교해 볼 때 관측치와 더 잘 일치 한다.

• 대한소아치과학회지
• /
• 제35권1호
• /
• pp.83-91
• /
• 2008

치아 우식증은 구강 내 세균, 식이(음식물), 치아 및 타액 등의 숙주 요인이 복합적으로 작용하여 발생한다. 이 중 치아의 탈회에 대한 저항성을 높이거나, 구강 내 세균의 산생성능을 낮춤으로써 치아우식을 예방할 수 있는 대표적인 약제로 불소와 클로르헥시딘이 있다. 이 약제의 구강 내 적용방법으로 치아에 대한 부착력이 뛰어나고 환자의 협조의존도가 비교적 적은 바니쉬 형태가 최근 들어 널리 이용되고 있다. 본 연구는 불소와 클로르헥시딘 바니쉬의 항우식 효과를 생체 내에서 비교 평가하기 위하여, 구강 내 가철성 장치에 우치 시편을 식립하고 불소 바니쉬와 클로르헥시딘 바니쉬를 각각 도포하였다. 치태축적을 유도하여 법랑질 탈회를 통한 우식 유발 환경을 만들고 바니쉬 제제가 구강 내에서 우치 법랑질의 우식 예방에 미치는 효과를 평가하였다. 전자 현미분석 장치와 편광현미경을 사용하여 법랑질 표면의 Ca, P에 대한 정량적 변화를 분석하고 조직학적 관찰을 시행하여 다음과 같은 결론을 얻었다. 1. 인공 우식병소에 대한 편광현미경 관찰 결과, 불소 및 클로르헥시딘 바니쉬 를 도포한 군에서 대조군에 비해 법랑질 병소가 경미하게 나타남을 확인할 수 있었다. 2. 우식을 유발한 경우 Ca와 P의 감소량은 대조군에서 가장 높게 나타났고(P<0.05), 불소 바니쉬군에서는 Ca와 P의 유의한 감소가 나타나지 않았으며 클로르헥시딘 바니쉬군에서는 P만 유의한 감소를 보였다(P<0.05). 이상의 결과로 보아 불소 및 클로르헥시딘 바니쉬 제제의 사용이 항우식 효과를 나타낸 것으로 판단되나, 불소 바니쉬가 좀 더 우수한 효과를 나타낸 것으로 보인다.

• 한국수산과학회지
• /
• 제19권3호
• /
• pp.241-248
• /
• 1986

송원산업주식회사에서 개발한 어망용 방오도료 Stapol N-6200D를 사용한 부착생물의 생태 및 방오 효율에 대한 조사 결과를 요약하면 다음과 같다. 1. 월별로 조사한 정치망 실험구의 연간 부착물의 합은 도료군과 대조군에서 각각 1,245.3g과 2,771.5g으로 방오효율은 $55.1\%$였다. 그러나 가두리 그물의 경우는 도료군과 대조군의 월별 부착물의 연간합이 각각 1,750.4g과 5,195.8g으로 $66.3\%$의 방오효율을 보였다. 2. 망목이 작은 가두리망 (5mm)이 정치망 (33mm)에 비해 약 1.7배의 부착물이 부착했다. 3. 정치망 및 가두리 그들의 1년간의 월별 총부착물의 합은 도료구의 부착물이 대조구 부착물의 $37.6\%$에 해당했다. 4 정치망과 가두리망의 대조군의 월별 총부착물은 6월이 최고였고 1월이 최하였다. 5. 월별로 조사된 가두리망을 포함한 전체적인 방오효율은 $4{\sim}6$월에는 $80.7\%$, $10{\sim}12$월에는 $43.3\%$로서 봄철의 방오효율이 더 높았다. 6. 도료의 색에 따른 1년간의 부착물은 흑색 그물에서 가장 않았고 청색 그물에서 가장 적었으나 통계적으로 유의성이 없는 것으로 나타났다. 7, 가장 다양한 부착생물의 출현은 6월이었고 1월에는 출현종이 가장 빈약했다. 8. 1년 내내 항상 우점적으로 출현한 종은 gam-marid였고 월별 부착생물중 가장 많은 양이 출현한 생물은 6월의 진주담치였다.

• 한국환경과학회지
• /
• 제28권12호
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.