• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.568-570
• /
• 2009

Octadecyltrichlorosilane (OTS) self-assembled monolayer was selectively patterned by deep ultraviolet exposure, resulting in differential surface state, hydrophilic area with OTS hydrophobic surroundings. High-resolution (<10 ${\mu}m$) nanoparticulate Ag electrodes and organic semiconductors were patterned from simple dip-casting and ink-jetting on the pre-patterned hydrophilic surface, forming all solution-processed organic thin film transistors. The devices typically have shown a mobility of 0.065 $cm^2/V{\cdot}s$ and on-off current ratio of $8{\times}10^5$.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

An inverse-twisted-nematic (ITN) transflective (TRF) liquid crystal (LC) display, where two imprinted optical films (IOFs) with surface microstructures are embedded was developed. One of the IOFs serves as an in-cell patterned retarder with multioptic axes, and the other behaves as a viewing-angle enhancement film. In the presence of an applied voltage, the surface microstructures on the IOFs provide the spontaneous twist of the LC from a vertically aligned state to a $90^{\circ}$ twisted-nematic (TN) state in the transmissive part, and to a $45^{\circ}$ TN state in the reflective part. The developed ITN TRF LC display exhibits high transmission and reflectance, fast response, and wide-viewing characteristics, along with achromaticity.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.1-5
• /
• 2019

This study has been focused on properties of surface technology for large diameter upper electrode using in high density plasma process as like semi-conductor manufacturing process. The experimental studies have been carried out to get mirror surface for upper electrode. For a formation of high surface quality upper electrode, single crystal silicon upper electrode has been mechanical and chemical machining worked. Mechanical machining work of the upper electrode is carried out with varying mesh type using diamond wheel. In case of chemical machining work, upper electrode surface roughness was observed to be strongly dependent upon the etchant. The different surface roughness characteristics were observed according to etchant. The machining result of the surface roughness and surface morphology have been analyzed by use of surface roughness tester, laser microscope and ICP-MS.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.181-185
• /
• 2014

We investigated the structural, electrical and optical characteristics of IGZO thin films deposited by a room-temperature RF reactive magnetron sputtering. The thin films deposited were annealed for 2 hours at various temperatures of 300, 400, 500 and $600^{\circ}C$ and analyzed by using X-ray diffractometer, transmission electron microscopy, atomic force microscope and Hall effects measurement system. The films annealed at $600^{\circ}C$ were found to be crystallized and their surface roughness was decreased from 0.73 nm to 0.67 nm. According to XPS measurements, concentration of oxygen vacancies were decreased at $600^{\circ}C$. Optical band gap were increased to 3.31eV. The carrier concentration and Hall mobility were sharply increased at 600oC. Our results indicate that the IGZO films deposited at a room temperature can show better thin film properties through a heat treatment.

• KSBB Journal
• /
• v.26 no.3
• /
• pp.243-247
• /
• 2011

Using Bacillus subtilis spore display system, with cotG as an anchoring motif, levansucrase from Zymomonas mobilis, was displayed on the outer surface of Bacillus subtilis spore. Flow cytometry of DB104 (pSDJH-cotG-levU) spore, proved the surface localization of CotG-LevU fusion protein on the spore compared to that of DB104. Enzymatic activity of DB104 (pSDJH-cotG-levU) spore showed more than 1.5 times higher levansucrase specific activity compared to that of the host spore, which is a remarkable increase of enzymatic activity considering the existence of sacA (sucrase) and sacB (levansucrase) in the Bacillus subtilis chromosome. The spore integrity, revealed by sporulation frequency test after heat and lysozyme treatment of spore, did not changed at all in spite of the CotG-LevU fusion protein incorporation into the spore coat layer during spore formation process. These data prove again that Bacillus subtilis spore could be considered as good live immobilization vehicle for efficient bioconversion process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.336-341
• /
• 2008

Recently, research on a flat panel display(FPD) has focused on organic light-emitting display(OLED) which has wide angle of view, high contrast ratio and low power consumption. ITO(Indium-Tin-Oxide) films are the most widely used material as a transparent electrode of OLED and also in many other display devices like LCD or PDP. The performance and efficiency of OLED is related to the surface condition of ITO coated glass substrate. The typical surface defect of glass substrate is measured for electric characteristics and physical condition for transmittance and roughness. Since ITO coated glass substrate can be destroyed for inspection about surface roughness, sheet resistance, film thickness and transmittance, precise fabrication condition should be made based on the estimated relationship. In this paper, ITO films were prepared on the commercial glass substrate by the Ion-Plating method changing the partial pressure of gas(Ar, 02) and the chamber temperature between $200^{\circ}C$ and $300^{\circ}C$. The characteristics of films were examined by the 4-point probe, supersonic thickness measurement, transmittance measurement and AFM. We estimated the relationship between processing parameters(Ar gas, O2 gas, Temperature) and properties of ITO films (Sheet Resistance, Film Thickness, Transmittance, Surface Roughness).

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.17-22
• /
• 2016

In smart factories, the entire manufacturing process from design to the final product is simulated in a virtual manufacturing environment and optimized before starting production. Suppliers and customers make decisions based on the simulation results. Therefore, effective rendering of the information of the virtual products to suppliers and customers is essential for this manufacturing paradigm. In this study, a method of rendering the surface roughness of the virtual products using a tactile display is presented. A tactile display device comprising a $3{\times}3$ array of individually controlled piezoelectric stack actuators is constructed. The surface topology of the virtual products is rendered directly by controlling the piezoelectric stack actuators. A series of experiments is performed to evaluate the performance of the tactile display device. An electrical discharge machined surface is rendered using the proposed method.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.123-132
• /
• 2017

The physical display technology is the ultimate display technology that human beings aspire, and the world makes use of laser, plasma and reflector plate. Besides, technology development of binocular stereoscopic display has been actively progressed, but there is a limitation to the intact physical representation such as influence of optical ambient light and brightness. In this paper, the display technology using physical deformation different from the existing optical display is approached as a cultural and emotional perspective. The purpose of this paper is to develop the multivariate display technology that can create 3D realistic stereoscopic images through projecting dynamic images on physically diversified screen by overcoming the limitations of 2D planar digital signage and study how to apply them to video, exhibition and performance.

• Journal of Information Display
• /
• v.8 no.1
• /
• pp.14-17
• /
• 2007

The toner type paper-like display (PLD) has been developed with two polymer particles having opposite polarity composed of polymer, colorant and external additives (nano-sized silica). Nano-sized silica with triboelectric charge was used for the charge control agent (CCA) and influenced on the electrostatic properties of the silica-coated polymer particles. The surface morphology and the cohesiveness of silica-coated polymer particles were changed with the silica coating time. From these results, it was verified that the PLD cell using silica-coated particles (200 seconds) shows a good white appearance and low driving voltage.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.10a
• /
• pp.142-146
• /
• 1997

An automated surface-strain measuring system is developed in the present study, which consists of the hardware to capture and to display digital images and the software to calculate the 3-D informations of grid points. The software is implemented using the image processing technique, and includes a program for the camera calibration and the post-processor to display the strain distribution. An LDH(limitting dome height) test specimen is measured its surface-strain as an application of the present system.