Browse > Article

Evaluation of the Machining Method on the Formation of Surface Quality of Upper Electrode for Semiconductor Plasma Etch Process  

Lee, Eun Young (Department of Mechatronics Engineering, Graduate School of Korea University of Technology and Education)
Kim, Moon Ki (School of Mechatronics Engineering, Korea University of Technology and Education)
Publication Information
Journal of the Semiconductor & Display Technology / v.18, no.4, 2019 , pp. 1-5 More about this Journal
Abstract
This study has been focused on properties of surface technology for large diameter upper electrode using in high density plasma process as like semi-conductor manufacturing process. The experimental studies have been carried out to get mirror surface for upper electrode. For a formation of high surface quality upper electrode, single crystal silicon upper electrode has been mechanical and chemical machining worked. Mechanical machining work of the upper electrode is carried out with varying mesh type using diamond wheel. In case of chemical machining work, upper electrode surface roughness was observed to be strongly dependent upon the etchant. The different surface roughness characteristics were observed according to etchant. The machining result of the surface roughness and surface morphology have been analyzed by use of surface roughness tester, laser microscope and ICP-MS.
Keywords
Upper electrode; Plasma etch; Surface roughness; Surface morphology; Semiconductor;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 A. Busnaina and H. Lin., "Physical removal of Nano scale defects from surfaces", IEEE/SEMI advanced semiconductor manufacturing conference, pp. 272-277, 2002.
2 H. Line, et al., "Cleaning of high aspect ratio sub-micron trenches", IEEE/SEMI advanced semiconductor manufacturing conference, pp. 304-308, 2002.
3 Ahmed A, Busnaina, H. Lin and N. Moumen, "Surface cleaning mechanism and future cleaning requirements", IEEE/SEMI advanced semiconductor manufacturing conference, pp. 328-333, 2002.
4 Jung-Hyun Eum, Kwan-Young Choi, Sahn Nahm, Kyoon Choi, "Texturing of Multi-crystalline Silicon Using Isotropic Etching Solution", Journal of the Korean Ceramic Society, Vol. 46, No. 6, pp. 685-688, 2009.   DOI
5 Masahiko yoshino, Aravindan sivanandam, Yuki kinouchi and Takashi matsumura, "Critical depth of hard brittle materials on Nano plastic forming", Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol. 2 No. 1, pp. 59-70, 2008.
6 H. D. Jeong, "Mirror Surface Grinding Using Ultrafine Grit Wheel", Journal of the Korean Society for Precision Engineering, Vol. 13 No. 6, pp. 45-51, 1996.
7 Jongchan Lee, Sangbaek Ha, Eunho Jeon, Whan Choi, Jaekeuk Jung, "A Study on the Silicon Grinding", Journal of the Korean Society for Precision Engineering, pp. 46-50, 1998.
8 Yong-Woo Kim, Soo-Chang, Jeong-Woo Park, Deug-Woo Le, "The Characteristics of Machined Surface Controlled by Multi-Arrayed Diamond Tip the Characteristics of Machined Surface Controlled by Multi-Arrayed Diamond Tip", Proceedings of the KSMPE Conference, pp. 204-208, 2008.
9 Han Seog Oh, Hong Lim Lee, "Silicon Wafering Process and Fine Grinding Process Induced Residual Mechanical Damage", Journal of the Korean Society for Precision Engineering, Vol. 19, No. 6, pp. 145-154, 2002.
10 W.S Chae and C.G Suk, "Si The Improved Characteristics of Wet Anisotropic Etching of Si with Megasonic Wave", Journal of the Microelectronics and Packaging Society, v.11 no.4, no.33, pp. 81-86, 2004.