• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.277-281
• /
• 2010

We propose a design and optimization method for a dielectric-loaded surface plasmon polariton waveguide using a genetic algorithm. This structure consists of a polymer ridge on top of two layers of substrate and gold film. The thickness, width and refractive index of the ridge are designed to optimize the figures of merit including mode confinement and propagation length. The modal analysis combined with the effective index method shows that the designed waveguide exhibits a fundamental propagation mode with high mode confinement while ensuring that the propagation loss remains relatively low.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• Journal of the Korean Statistical Society
• /
• v.5 no.2
• /
• pp.101-107
• /
• 1976

One of the important properties of a 'good' response surface design is that the design should be insensitive to wild observations. In this note, a measure of sensitivity to wild observations is studied. It is shown that designs are made robust to wild observations by making $Tr[X'X)^{-1}M]$ small where M is a moment matrix over some region of interest. The proposed criterion is compared with that suggested by Box and Draper. Some about robust two-variable response surface designs are given.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.629-630
• /
• 2010

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.54-62
• /
• 2017

This paper presents a design of the Interior Permanent Magnet Synchronous Motor (IPMSM). an initial design process is accomplished by using the parametric design. In the design process, motor characteristics of parameters is computed by the d-q axis equivalent circuit model. Then, an optimal design process is accomplished by combination the experimental design and the response surface method. Finally, the design and analysis results are verified with experimental results.

• International Journal of Automotive Technology
• /
• v.4 no.3
• /
• pp.135-140
• /
• 2003

In the deterministic optimization of a structural system, objective function, design constraints and design variables, are treated in a nonstatistical fashion. However, such deterministic engineering optimization tends to promote the structural system with lest reliability redundancy than obtained with conventional design procedures using the factor of safety. Consequently, deterministic optimized structures will usually have higher failure probabilities than unoptimized structures. Therefore, a balance must be developed between the satisfactions of the design requirements and the objectives of reducing manufacturing cost. This paper proposes the reliability-based design optimization (RBDO) technique, which enables the optimum design that considers confidence level for the vibration characteristics of structural system. Response surface method (RSM) is utilized to approximate the performance functions describing the system characteristics in the RBDO procedure. The proposed optimization technique is applied to the pillar section design considering natural frequencies of a vehicle structure.

• Communications for Statistical Applications and Methods
• /
• v.16 no.1
• /
• pp.195-208
• /
• 2009

A conventional single design optimality criterion has been used to select an efficient experimental design. But, since an experimental design is constructed with respect to an optimality criterion pre specified by investigators, an experimental design obtained from one optimality criterion which is superior to other designs may perform poorly when the design is evaluated by another optimality criterion. In other words, none of these is entirely satisfactory and even there is no guarantee that a design which is constructed from using a certain design optimality criterion is also optimal to the other design optimality criteria. Thus, it is necessary to develop certain special types of experimental designs that satisfy multiple design optimality criteria simultaneously because these multi-optimal designs (MODs) reflect the needs of the experimenters more adequately. In this article, we present a heuristic approach to construct second-order response surface designs which are more flexible and potentially very useful than the designs generated from a single design optimality criterion in many real experimental situations when several competing design optimality criteria are of interest. In this paper, over cuboidal design region for $3\;{\leq}\;k\;{\leq}\;5$ variables, we construct multi-optimal designs (MODs) that might moderately satisfy two famous alphabetic design optimality criteria, G- and IV-optimality criteria using a GA which considers a certain amount of randomness. The minimum, average and maximum scaled prediction variances for the generated response surface designs are provided. Based on the average and maximum scaled prediction variances for k = 3, 4 and 5 design variables, the MODs from a genetic algorithm (GA) have better statistical property than does the theoretically optimal designs and the MODs are more flexible and useful than single-criterion optimal designs.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.63-69
• /
• 2016

Poly(butylene terephthalate)(PBT) surface was modified by UV/ozone irradiation and the effect of UV energy on the surface properties of the irradiated PBT films were characterized by the reflectance, surface roughness, contact angles, ESCA, and ATR analyses of the film surface. The surface reflectance, at the short wavelength of visible spectrum of particularly 400nm, decreased with increasing UV energy. And the irradiation roughened the film surface uniformly in the nano scale. The maximum surface roughness increased from 110nm for the unirradiated sample to 303nm at the UV energy of $10.6J/cm^2$. The surface energy of PBT film increased from $50.5mJ/m^2$ for the unirradiated PBT to $58.8mJ/m^2$ at the irradiation of $21.2J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups containing oxygens such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The increased dyeability of the modified film to cationic dyes may be resulted from the photochemically introduced anionic and dipolar dyeing sites on the PBT films surfaces.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.173-181
• /
• 2011

Contemporary architecture has shown interest in surface after breaking off the relation with structure. Also, the development of contemporary media has brought the great change to the surface of architecture. Interaction among the people, architecture, and environment is also the main point of interest in adapting the role of media to the architecture. But contemporary media itself have been applied on surface in architecture lately. So, it is purpose of the study to analyze the contemporary media characteristics application on the surfaces of EXPO pavilions based on the related characteristics of interaction effects. The categories and the contents for the frame of case studies were arranged through document research and field study. Case studies were focused on the pavilions of the World Exposition Shanghai China 2010. Surface can make the interaction between human and architecture more dramatically by the application the role of media. It was analyzed through the study that the interaction level of people is the important issue shared in digital or analog media application on surface of pavilion. The complementary relationship between surface of contemporary architecture and contemporary media can be manipulated and enriched by the application of various style of media on surface.