• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권6호
• /
• pp.28-36
• /
• 2015

Simultaneous mobility reduction of explosives and heavy metals in an operational range by monopotassium phosphate (MKP) and bentonite spreading technology was investigated. Potassium ion and phosphate ion in MKP act as explosives sorption enhancer and insoluble heavy metal phosphate formation, respectively, while bentonite acts as the explosives adsorbent. Then, the decrease in surface water concentration of the pollutants and resulting risk reduction for local residents of the operational range, by MKP/bentonite application was estimated. Under untreated scenario, the noncancer hazard index (HI) exceeded unity on February, July and August, mainly due to 2,4,6-trinitrotoluene (TNT); however, MKP/bentonite treatment was expected to lower the noncancer hazard index by decreasing the surface water concentration of explosives and heavy metals (especially TNT). For example, on July, estimated surface water concentration and HI of TNT were 0.01 mg/L and 1.1, respectively, meanwhile the sorption coefficient of TNT was 3.9 mg¹⁻ⁿkg⁻¹Lⁿ. However, by MKP/bentonite treatment, the TNT sorption coefficient increased to 113.8 mg¹⁻ⁿkg⁻¹Lⁿ and the surface water concentration and HI decreased to about 0.002 mg/L and 0.2, respectively. Based on the result, it can be concluded that MKP/bentonite spreading is a benign technology that can mitigate the risk posed by the pollutants migration from operational ranges.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.5745-5751
• /
• 2013

본 논문은 monomer에서 결합증진에 많은 역할을 하는 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면 처리한 것이 의치상 레진과 이장재간의 결합력에 미치는 영향에 대해 알아보고자 하였다. 의치상 레진에 MMA와 TEGDMA의 농도별 표면 처리와 silane coupling agent로 표면처리 후 이장재를 주입하여 전단결합강도를 측정하였다. MMA와 TEGDMA의 농도별 표면 처리에 따른 의치상 레진과 이장재간의 전단결합강도에서는 Vertex self curing resin에서 95%, 90%, 80%, Kooliner에서는 95%, 90%에서 유의적으로 높게 나타났다(P<0.05). 또한, silane coupling agent 5%로 표면 처리한 그룹이 Vertex self curing resin과 Kooliner 모두에서 전단결합강도가 유의적으로 높게 나타났다(P<0.05). 따라서 적절한 화학적 표면 처리는 의치상 레진과 이장재간의 결합력 증가에 영향을 미치리라 사료된다.

• 한국환경과학회지
• /
• 제12권4호
• /
• pp.419-426
• /
• 2003

This study was performed to research ozone concentration related to airmass thunderstorm using 12 years meteorological data(1990~2001) at Busan. The occurrence frequency of thunderstorm during 12 years was 156 days(annual mean 13days). The airmass thunderstorm frequency was 14 days, most of those occurrence at summertime(59%). In case August 4, 1996, increase of ozone concentration was simultaneous with the decrease of temperature and increase of relative humidity, In case July 23, 1997, ozone concentration of western site at Busan increased, while its of eastern site decreased as airmass thunderstorm occurred(about 1500LST). It is supposed that these ozone increases are the effect of ozone rich air that is brought down by cumulus downdrafts from height levels where the ozone mixing ratio is larger. Thunderstorms can cause downward transport of ozone from the reservoir layer in the upper troposphere into planeta교 boundary layer(PBL). This complex interaction of source and sink processes can result in large variability fer vertical and horizontal ozone distributions. Thus a variety of meteorological precesses can act to enhance vertical mixing between the earth's surface and the atmospheric in the manner described fer thunderstorm.

• 한국재료학회지
• /
• 제11권7호
• /
• pp.615-621
• /
• 2001

본 연구에서는 고변형된 이중 에피층에서 두 가지 종류의 반원 전위 루프 ($60^{\circ}$및 쌍격자 전위)의 생성 속도물 예측하는 모델을 제안한다. 모델링 시, 에피층 표면에서 발생하는 결함과 이곳에 집중되는 응력 효과를 고려하였으며, Matthew의 식을 발전시켜 에피층 두께에 따른 잔류 변형율을 변수로 사용하였다. 모델링을 통한 계산 결과에 의하면, 응력 집중 현상은 고변형된 이종에피층에서 전위 및 결정 결함 현상을 설명하는 데 매우 중요하였다. 또한,본 연구를 퉁하여, 응력 집중 현상이 에피층 성장 초기에 생성되는 전위 형태를 결정하는 주요한 인자 중 하나임을 단면 투과 전자 현미경 결과와의 비교를 통해 확인할 수 있었다.

• 대한치과기공학회지
• /
• 제34권4호
• /
• pp.473-482
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution of the surrounding tissues according to 3 proximal plate types of the RPI clasp. Methods: The removeable partial denture which mandibular right and left second premolars and mandibular molars were lost was attached to a three dimensional photo elastic epoxy resin model. Then 120N of vertical load was applied. After 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns. Results: Kratochvil type guiding plane exhibited little uniform stress distribution on load center and alveolar ridge, but higher stress concentration on buccal surface of second premolar. Krol type guiding plane exhibited the stress concentration on the front of load center and relatively higher stress concentration on buccal surface of first premolar. However, this type had no effect on canine. Researcher type guiding plane showed the stress concentration on second premolar and molar, but the little stress distribution on first premolar. Conclusion: In all types, excessive stress concentration was appeared and three types were not significant different.

• 한국전기전자재료학회논문지
• /
• 제29권4호
• /
• pp.225-230
• /
• 2016

Effect of electrolyte composition and concentration on PEO coating layer were investigated. Mg alloy, Surface of AZ31 and AZ91 were oxidized using PEO with different electrolyte system, Na-P and Na-Si. and applied voltage and concentration. We measured thickness, roughness, X-ray crystallographic analysis and breakdown voltage of the oxidized layer. When increasing concentration of electrolyte, the thickness of oxide layer also increased too. And roughness also increased as concentration of electrolyte increasing. Breakdown voltage of coated layer showed same behavior, the voltage goes high as increasing thickness of coating layer, as increasing concentration of electrolyte, and increasing applied voltage of PEO. $Mg_2SiO_4$ phase were observed as well as MgO.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.579-585
• /
• 2003

Recently the utilization of the ozone dissolved de-ionized water(DI-O3 water) in semiconductor wet cleaning process to replace the conventional RCA methods has been studied. In this paper, we propose the water-electrode type ozone generator which has the ozone gas characteristics of the high concentration and high purity to produce the high concentration DI-O3 water for the silicon wafer surface cleaning process. The ozone generator has the dual dielectric tube structure of silent discharge type and the water is both used to electrode and cooling water. We investigate the performance of the proposed ozone generator which has the design goal of the concentration of 7[wt%] and ozone generation quantity of 6[g/hr] at flow rate of 1[$\ell$/min). The experiment results show that the water electrode type ozone generator has the characteristics of 8.48[wt%] of concentration, 8.08[g/hr] of generation quantity and 76.2[g/kWh] of yield and it's possible to use the proposed ozone generator for the DI-O3 water cleaning process of silicon wafer surface.

• 한국표면공학회지
• /
• 제40권2호
• /
• pp.77-81
• /
• 2007

To investigate the characteristics of green light-emitting OLED device, C545T material with $Alq_3$ was doped in the OLED device of $ITO(1500)/2-TNATA(400{\AA})/NPB(80{\AA})/Alq_3:C545T(160{\AA})/Alq_3(240{\AA})/LiF(3{\AA})/Al(2400{\AA})$ structure, which was used as a activator at the respective concentration of 0.5 vol.%, 1 vol.%, 2 vol.% and 3 vol.%. It was observed from the experiments that the device efficiency firstly increased with the increase of C545T concentration and the maximum efficiency of 10.9 cd/A and 4.28 lm/W was obtained at C545T concentration of 1 vol.%, and then the device efficiency decreased as the C545T activator concentration increased above 2 vol.% contents, while the longest lifetime of over 750 hours was obtained at C545T concentration of 1 vol.%.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.125-129
• /
• 2021

We investigated the electronic property and atomic structure for chalcopyrite (CH) Al_xGa_1-xAs semiconductor by using first-principles FPLMTO method. The CH-Al_xGa_1-xAs exhibits a p-type semiconductor with a direct band-gap. For low Al concentration unoccupied hole-carriers are induced, but for high Al concentration it is formed a localized bonding or anti-bonding state below Fermi level. The hybridization of Al(3s)-Ga(4s, or 4p) is larger than that of Al(3s)-As(4s, or 4p). And the Al film on As-terminated surface, Al/AsGa(001), is more energetically favorable one than that on Ga-terminated (001) surface. Consequently, the band-gap of CH-Al_xGa_1-xAs system increases exponentially with increasing Al concentration. The change of lattice parameter is shown two different configurations with increasing Al concentration. The calculated lattice parameters for CH-Al_xGa_1-xAs system are compared to the experimental ones of zinc-blend GaAs and AlAs.

• 한국식품조리과학회지
• /
• 제32권3호
• /
• pp.307-315
• /
• 2016

Purpose: The central composition design was used to optimize the mixture conditions of black garlic extract. Methods: The response surface methodology (RSM) was carried out from concentration of black garlic extract ($X_1$) and the amount of the black garlic extract ($X_2$) as independent variables, and salts ($Y_1$), reducing sugars ($Y_2$), the content of total phenolic compounds ($Y_3$) and ABTS radical scavenging activity ($Y_4$) as dependent variables. We confirmed the conditions that salinity was minimized and reducing sugar, total phenolic compounds and ABTS radical scavenging activity had maximum values through the response surface analysis. Results: All results had saddle points in originally set up conditions hence, ridge analysis was carried out for narrowing the experimental area. The minimum salt concentration was 16.03% at black garlic extract concentration of $14.84^{\circ}brix$ and contents of 9.26%. Reducing sugar content had maximum of value 7.30 g/mL at $24.58^{\circ}brix$ and contents of 8.08%. Total phenolic compounds contents and ABTS radical scavenging activity had maximum values at black garlic extract concentration of 20.33 and $25.02^{\circ}brix$. The results indicate that addition of black garlic extract contributed to increased reducing sugar, phenolic compounds contents and antioxidant activity of the soy sauce, but the salt concentration was not significantly affected. Conclusion: Based on the results of RSM, the optimum ranges of addition conditions for lowering the salt concentration and, increasing the sensory and functional ability of soy sauce were as follows: black garlic extract concentration of $15-25^{\circ}brix$ and content of 7.8-9.3%.