1 |
E. J. Nam, "A study for bond strengths of acrylic and silicone based soft lining materials", Dankook University, 1999.
|
2 |
Jeong CM, "Atlas of Chairside Relining Technique", Seoul: Shinhung, 5-12, 2001.
|
3 |
Kim GS, "The effect of denture cleansers on the bond strength and the surface hardness of reline resin to denture base resin", J Korean society Dent Prosthet, 41,4, 493-502, 2003.
과학기술학회마을
|
4 |
Y. M. Kim, "The study on the physical property of the permanent soft denture liners", Chonnam National University, 1999.
|
5 |
Ducan JD, Clark LL, "The use of a soft denture liner for chronic residual ridge soreness", J Am Dent Assoc, 111:64-65, 1985.
DOI
|
6 |
Kawano F, Dootz ER, "Comparison of bond strength of six soft denture liners to denture base resin", J Prosthet Dent, 68:368-371, 1992. DOI: http://dx.doi.org/10.1016/0022-3913(92)90347-D
DOI
ScienceOn
|
7 |
Sarac YS, Basoglu T, Ceylan GK, Sarac D, Yapici O, "Effect of denture base surface pretreatment on microleakage of a silicone-based resilient liner", J Prosthet Dent, 92:283-7, 2004. DOI: http://dx.doi.org/10.1016/j.prosdent.2004.06.004
DOI
ScienceOn
|
8 |
C. M. Jeong, "Effect of resin surface primers used for bonding chair-side relining resin to thermoplastic denture base resin", J Korean society Dent Mater 28(4) :359-366, 2001.
|
9 |
Chung CH, "Complete denture prosthodontics", Seoul:Jisung, 1:496-499, 1994.
|
10 |
Ogle RE, Sorensen SE, Lewis EA, "A new visible light cured resin system applied to removable prosthodontics", J Prosthet Dent, 56:497-506, 1986. DOI: http://dx.doi.org/10.1016/0022-3913(86)90397-5
DOI
ScienceOn
|
11 |
M. C. Yoon, "Effect of denture base surface treatments on the tensile bond strength between a resilient liner and a processed denture base resin", Pusan National University, 2007.
|
12 |
Takahashi Y, Chai J, "Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin", Int J Prosthodont, 14(6):531-5, 2001.
|
13 |
Siddesh CS, Aras MA, "In vitro evaluation of transverse strength of repaired heat cured denture base resins with and without surface chemical treatment", J Oral Prosthodont, 8:87-93, 2008.
|
14 |
Canan B, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone", Gerodontology, 27:217-223, 2010. DOI: http://dx.doi.org/10.1111/j.1741-2358.2009.00321.x
DOI
ScienceOn
|
15 |
Debora B. B, "Effect oh monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material", Gerodontology, 26:225-231, 2009. DOI: http://dx.doi.org/10.1111/j.1741-2358.2008.00262.x
DOI
ScienceOn
|
16 |
Della Bona A, Anusavice KJ, Shen C, "Microtensile strength of composite bonded to hot-pressed ceramics", J Adhes Dent, 2(4):305-13, 2000.
|
17 |
Hiroshi S, "Effect of surface preparation using ethyl acetate on repair strength of denture base resin", Acta Odontol Scand, 64(3):159-63, 2006. DOI: http://dx.doi.org/10.1080/00016350500514808
DOI
ScienceOn
|
18 |
C. R. Leles, "Bonding strength between a hard chairside reline resin and a denture base material as infuenced by surface treatment", J Oral Rehabil, 28(12):1153-7, 2001 DOI: http://dx.doi.org/10.1046/j.1365-2842.2001.00786.x
DOI
ScienceOn
|
19 |
Daniel MW, Francis LF, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxysilane-modified colloidal silica coatings" J colloid interface sci, 205(1):191-200, 1998. DOI: http://dx.doi.org/10.1006/jcis.1998.5671
DOI
ScienceOn
|
20 |
Ortman HR, Ortman LF, "Denture refitting with today's concepts and materials", Dent Clin North Am, 19:269-290, 1975.
|
21 |
Ruyter IE, Svendsen SA, "Flexural properties of denture base polymers", J Prosthet Dent, 43:95-104, 1980. DOI: http://dx.doi.org/10.1016/0022-3913(80)90362-5
DOI
ScienceOn
|
22 |
Cucci AL, Vergani CE, Giampaolo ET, Maria C, "Water sorption, solubility and bond strength of two autopolymerizing acrylic resins and one heat polymerizing acrylic resins", J Prosthet Dent, 80:434-438, 1998. DOI: http://dx.doi.org/10.1016/S0022-3913(98)70008-3
DOI
ScienceOn
|
23 |
S. Y. Kim, "The change in transverse strength of denture base after reline procedure", Chonnam National University, 1999.
|
24 |
Khan Z, Fraunhofer JA, Razavi R, "The staining characteristics transverse strength and micro hardness of a visible light cured denture material", J Prosthet Dent, 57:384-386, 1987. DOI: http://dx.doi.org/10.1016/0022-3913(87)90319-2
DOI
ScienceOn
|
25 |
Shen C, Colaizzi FA, Birns B, "Strength of denture repairs as influenced by surface treatment", J Prosthet Dent, 52(6):844-8, 1984. DOI: http://dx.doi.org/10.1016/S0022-3913(84)80016-5
DOI
ScienceOn
|
26 |
H. Y. Na, "Effect of crosslinking agent on the adhesion of barbituric acid-initiated resin to dentin", J Korean society Dent Mater 28(2) :139-144, 2001.
|
27 |
Matinlinna JP, Ozcan M, Lassila LV, Vallittu PK, "The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titaniummetal", Dent Mater, 20(9):804-13, 2004. DOI: http://dx.doi.org/10.1016/j.dental.2003.10.009
DOI
ScienceOn
|
28 |
Clancy JM, Boyer DB, "Comparative bond strengths of light-cured, heat-cured, and autopolymerizing denture resins to denture teeth", J Prosthet Dent, 61(4):457-62, 1989. DOI: http://dx.doi.org/10.1016/0022-3913(89)90014-0
DOI
ScienceOn
|
29 |
Vallittu PK, Ruyter IE, "Swelling of poly(methyl methacrylate) resin at the repair joint" Int J Prosthodont, 10(3):254-8, 1997.
|
30 |
Satas D, Handbook of pressure sensitive adhesive technology(2nd Ed.), 124-127, New York:Van Nostrand Reinhold, 1989.
|
31 |
International Organization for standardization ISO 29022, "Dentistry-Dentistry-Adhesion-Notched edge shear bond strength test", Geneva: Switzerland, ISO, 2013.
|