• 패션비즈니스
• /
• 제13권2호
• /
• pp.145-153
• /
• 2009

By introducing chitosan treatment prior to dyeing, examination was given to the effect of chitosan coated on the surface of fabrics on the color change of dyed fabric based on th e change of ${\Delta}E$, a*, and b* values. At the same time, the dyeing mechanism of Caesalpinia sappan dyestuff was predicted by the investigation of the change of air-permeability ac cording to the chitosan treatment. The change of elution was investigated by the examination of the elution of metallic ions employed as mordants after soaking dyed fabrics in the solution of alkaline perspiration ba sed upon the fact that chitosan carries excellent absorption ability toward metallic ions.

• 한국치위생학회지
• /
• 제13권2호
• /
• pp.351-360
• /
• 2013

Objectives : The purpose of this study was to evaluate the effects of tooth bleaching agent contained 15% carbamide peroxide on the color, microhardness and surface roughness of tooth-colored restorative materials by using pH cycling model. Methods : Four types of tooth-colored restorative materials, including a composite resin(Filtek Z350 ; Z350), a flowable composite resin(Filtek P60 : P60), a compomer(Dyract$^{(R)}$ AP ; DY), and a glass-ionomer cement(KetacTM Molar Easymix ; KM). were used in the study. Eighty-eight specimens of each material were fabricated, randomly divided into two groups(n=44): experimental group(15% carbamide peroxide) and control group(distilled water). These groups were then divided into four subgroups(n=11). All groups were bleached 4 hours per day for 14 days using pH cycling model. The authors measured the color, microhardness, and roughness of the specimens before and after bleaching. The data were analyzed with ANOVA and T-test. Results : Z350 and P60 showed a slight color change(${\Delta}E^*$), whereas DY and KM showed significantly color change(p<0.05). Among them, the greatest color change was observed in DY. Percentage microhardness loss(PML) of the distilled water group was 1.8 to 5.1%, and 15% peroxide peroxide group was 5.0 to 25.2%. Microhardness of DY and KM showed a statistically significant decrease(p<0.05). Roughness was increased in all groups after bleaching. Z350 and P60 does not have a significant difference(p>0.05), however DY and KM significantly increased more than the 0.2 ${\mu}m$(p<0.05). Conclusions : The effects of bleaching on restorative materials were material dependent. It is necessary to consider the type of the material before starting the treatment.

• 치위생과학회지
• /
• 제9권5호
• /
• pp.525-530
• /
• 2009

이 연구는 35% 과산화요소를 이용한 전문가 치아미백술에 플라즈마 아크를 함께 적용하여 플라즈마 아크가 법랑질의 색조변화에 미치는 효과와 비커스경도와 주사전자현미경을 이용하여 법랑질 표면에 미치는 영향을 알아보고자 in vitro 평가를 시행하여 다음과 같은 결론을 얻었다. 1. 미백 횟수의 증가에 따라 색조변화량(${\Delta}E^*$)이 통계적으로 유의한 증가를 나타내었으며, 미백 제만 단독으로 적용한 대조군 보다 플라즈마 아프를 함께 적용하여 미백처리를 한 실험군의 색조변화량(${\Delta}E^*$)이 더 높게 나타나는 것을 알 수 있었다. 2. 미백처리 전 후 법랑질의 미세경도 측정 값을 분석한 결과 미백 처치를 함으로써 미세경도 값이 통계적으로 유의하게 감소되었고, 미백제에 플라즈마 아크를 함께 적용한 실험군에서 더 큰 미세경도의 감소가 나타나는 것을 알 수 있었다. 3. 주사전자현미경 관찰에서 미백 처치를 한 시료에서 법랑질 표면이 상당히 거칠어진 양상을 나타내는 것을 볼 수 있었다. 이상의 결과를 종합해 볼 때 전문가 치아미백술에서 플라즈마 아크를 함께 적용함으로써 색조변화를 더욱 상승시킬 수 있으나, 법랑질 표면의 미세경도와 형태변화를 증가시킬 수 있으므로 미백 효과는 증가시키면서 법랑질의 형태와 구조는 변화시키지 않는 안전한 미백 방법에 관한 연구가 이루어 져야 할 것으로 사료된다.

• 한국염색가공학회지
• /
• 제20권2호
• /
• pp.66-74
• /
• 2008

Effect of disperse dyeing on flame retardant finishing of PET fabrics via UV curing using three UV curable phosphorous-containing methacrylates and ammonium polyphosphate(APP) was investigated. The dye fixation and flame retardancy of PET fabrics did not change significantly with excellent durability to five laundering cycles irrespective of the dyeing and finishing sequence. However, the flame retardancy of Pekoflam-treated fabrics was lower than that of the UV treated and decreased substantially when heat treatment was carried out before the dyeing. The dyeability of the flame-retardant PET fabrics was not affected in the case of UV curing of the methacrylates alone. However, UV finishing after the dyeing caused significant decrease in K/S and ${\Delta}E$ due to changed refraction and inherent color of surface coating of the UV curable monomers and APP. Whereas the heat treatment with Pekoflam decreased both color fastness to laundering and sublimation, surprisingly the UV finish of PET fabrics before and after the dyeing increased the color fastness probably resulting from the presence of photopolymerized surface layer on the fabrics.

• 보존과학회지
• /
• 제33권6호
• /
• pp.553-564
• /
• 2017

본 연구는 토벽화 채색층 고착제로서의 도박풀 적용 가능성을 파악하기 위하여, 내후성 실험에 따른 표면변화를 평가하였다. 내후성 실험에 대한 평가는 색차계(CR-400, MINOLTA)를 사용하였으며, 열화로 인한 변화가 특징적으로 나타난 주사 3% 조건은 반사투과장치(CARY-5000, AGILENT)를 사용하여 추가적인 평가를 실시하였다. 자외선 열화 실험 후, 대부분의 도박풀 도포 시료가 아교풀 도포 시료에 비해 색변화가 적었으며, 흡습 건조 열화시험 결과에서는 도박풀이 0.5%와 3% 조건에서 아교에 비해 색변화가 낮게 나타나는 것을 확인하였다. 또한 열화 실험 후 반사 흡수도 측정결과, 아교에 비해 도박풀의 열화 후 반사 흡수도 변화정도가 낮은 것으로 나타났다. 따라서 도박풀을 토벽화 고착제로 사용할 경우 열화에 따른 변색은 비교적 안정적일 것으로 판단된다.

• 한국의류산업학회지
• /
• 제13권6호
• /
• pp.972-982
• /
• 2011

The purpose of this study is to improve the method of color developing with alkali solution as a promotor of color developing for feasible use. Cotton fabric was dyed with persimmon extract ranged with 0~3% alkali component with 5 types of strong to mild alkali solution. Heat treatment for color developing was applied to fabric dyed with persimmon extract and alkali mixing solution. Tests were carried out to analyze the change of surface color, ${\Delta},Ea^*b^*$, and water repellent of the dyed cotton fabric. The alkali mixing sample showed higher ${\Delta},Ea^*b^*$ value than control one without alkali mixing on the base of dyed fabric due to high color developing by alkali in the initial step of dyeing process. As alkali concentration increased, deeper dark color appeared on the fabric. The fabric color was changed to more dark in the application of sodium hydroxide, sodium carbonate, potassium carbonate in the initial step of dyeing process but color was not changed by increased heating time. However, the fabric showed a slight dark color with sodium acetate and more color change than that of the fabric dyed with persimmon extract without alkali. Therefore, sodium acetate seemed to a suitable promotor for color developing in persimmon extract dyeing. Property of water repellent was showed after color developing by heating with low concentration of alkali treatment.

• 대한원격탐사학회지
• /
• 제26권2호
• /
• pp.209-220
• /
• 2010

해양현상을 이해하기 위한 관측분야의 노력 중에서 해류 정보의 생산은 가장 어려운 작업 중의 하나이다. 이를 극복하기 위한 대안으로서 연속 화상 자료로부터 해류벡터를 추정하려는 많은 연구들이 진행 되고 있다. 본 연구에서는 한반도 주변의 SeaWiFS (Sea-viewing Wide Field-of-view Sensor) chlorophyll-a 해색 자료와 AVHRR/SST 를 이용하여 연속 화상 사이의 유사한 형태를 추적하는 최대상 관계수법을 사용한 표층 유속 벡터의 추정을 시도하였다. 한국의 남해역에서 적용한 유속 벡터 결과는 해면 고도계를 이용한 지형류, ADCP 관측 결과와 비교하여 유속은 약 15% 정도 작고, 유향은 약 $36^{\circ}$의 차이로 근접하여 기존 연구 결과에 비해 양호하게 나타났다. 이는 향후 GOCI 자료의 응용적 측면에서 매우 고무적이다.

• The Journal of Advanced Prosthodontics
• /
• 제16권2호
• /
• pp.115-125
• /
• 2024

PURPOSE. The purpose of this in vitro study was to investigate the fracture resistance, surface hardness, and color stain of 3D printed, CAD-CAM milled, and conventional interim materials. MATERIALS AND METHODS. A total of 80 specimens were fabricated from auto polymerizing polymethyl methacrylate (PMMA), bis-acryl composite resin, CAD-CAM polymethyl methacrylate resin (milled), and 3D printed composite resin (printed) (n = 20). Forty of them were crown-shaped, on which fracture strength test was performed (n = 10). The others were disc-shaped specimens (10 mm × 2 mm) and divided into two groups for surface hardness and color stainability tests before and after thermal cycling in coffee solution (n = 10). Color parameters were measured with a spectrophotometer before and after each storage period, and color differences (CIEDE2000 [DE00]) were calculated. The distribution of variables was measured with the Kolmogorov Smirnov test, and one-way analysis of variance (ANOVA), Tukey HSD, Kruskal-Wallis, Mann-Whitney U tests were used in the analysis of quantitative independent data. Paired sample t-test was used in the analysis of dependent quantitative data (P < .05). RESULTS. The highest crown fracture resistance values were determined for the 3D printed composite resin (P < .05), and the lowest were observed in the bis-acryl composite resin (P < .05). Before and after thermal cycling, increase in mean hardness values were observed only in 3D printed composite resin (P < .05) and the highest ΔE₀₀ value were observed in PMMA resin for all materials (P < .05). CONCLUSION. 3D printing and CAD-CAM milled interim materials showed better fracture strength. After the coffee thermal cycle, the highest surface hardness value was again found in 3D printing and CAD-CAM milled interim samples and the color change of the bis-acryl resin-based samples and the additive production technique was higher than the PMMA resin and CAD-CAM milled resin samples.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.90-95
• /
• 2012

Objectives: The purpose of this study was to determine the effect of resin infiltration technique on color and surface hardness of white spot lesion (WSL) with various degrees of demineralization. Materials and Methods: Ten human upper premolars were cut and divided into quarters with a $3{\times}4mm$ window on the enamel surface. Each specimens were separated into four groups (n = 10) and immersed in demineralization solution to create WSL: control, no treatment (baseline); 12 h, 12 hr demineralization; 24 h, 24 hr demineralization; 48 h, 48 hr demineralization. Resin infiltration was performed to the specimens using Icon (DMG). $CIEL^*a^*b^*$ color parameters of the enamel-dentin complex were determined using a spectroradiometer at baseline, after caries formation and after resin infiltration. Surface hardness was measured by Vickers Micro Hardness Tester (Shimadzu, HMV-2). The differences in color and hardness among the groups were analyzed with ANOVA followed by Tukey test. Results: Resin infiltration induced color changes and increased the hardness of demineralized enamel. After resin infiltration, there was no difference in color change (${\Delta}E^*$) or microhardness among the groups (p < 0.05). Conclusion: There was no difference in the effect of resin infiltration on color and hardness among groups with different extents of demineralization.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.566-577
• /
• 2009

실내에서 일어나는 목재의 표면 열화특성을 재색, 화학적 및 해부학적 변화 차원에서 분석하였다. 실험대상으로는 실내에서 장기간 보관중인 삼나무 목제품을 사용하였다. 실내 보존 초기에는 황색도와 적색도가 급격히 변하였고 5년 사이에 백색도의 감소가 두드러졌다. 화학성분의 분석결과 셀룰로오스, 헤미셀룰로오스, 리그닌 성분 모두 감소하였으나 리그닌의 감소가 더 컸다. 현미경 관찰 결과 5년이 경과한 목제품에서는 목재표면에서 2~3개 층에서 리그닌이 분해되어 중간층이 분리되었다. 실내 환경조건에서 발생되는 표면 열화 특성은 야외에서 발생되는 표면열화 특성과 매우 유사하였으나 그 정도는 미약하였다.