• 보존과학회지
• /
• 제26권2호
• /
• pp.109-120
• /
• 2010

본 연구에서는 삼국, 고려, 조선시대의 금동유물 각 한 점과 제작시기를 알 수 없는 금동유물 한 점 그리고 고려의 금은유물 한 점을 선택하여 도금층과 바탕금속 간에 일어나는 금속원소의 확산현상을 살펴보았다. 그 결과 대부분의 유물에서 확산에 관한 직간접적인 증거가 확인되었으며, 특히 조선시대의 금동장식에 대한 분석결과로부터는 이러한 확산현상이 도금공정에 의도적으로 활용되었을 가능성이 제기되었다. 확산이 일어난 금동유물의 도금층에서는 표면에서 내부로 갈수록 점차 금함량이 감소하면서 구리함량이 증가하였으며 이로 말미암아 도금층과 바탕금속 간의 경계가 불분명해지는 것으로 드러났다. 이러한 점진적 조성변화는 열에 의한 확산에 기인하는 것으로, 도금층 전체에 산소함량이 매우 낮은 점으로 보아 이것이 매장도중 부식에 의하여 초래되었을 가능성은 매우 낮다. 확산정도에 따라 금동유물의 표면색조에는 차이가 발생하게 되는데, 확산에 의한 색조변화는 표면의 미소형태나 화학조성 면에서 부식에 의한 것과 분명하게 구별되는 것으로 밝혀졌다. 금은유물에서는 금은의 확산과 더불어 도금층의 수은도 바탕금속으로 이동하는 현상이 확인되었다.

• 복식문화연구
• /
• 제30권4호
• /
• pp.579-593
• /
• 2022

This study examines the surface characteristics, electrical conductivity, electromagnetic wave blocking characteristics, infrared (IR) transmittance, stealth function, thermal characteristics, and moisture characteristics of IR thermal imaging cameras. Nylon film (NFi), nylon fabric (NFa), and 5 types of nylon mesh were selected as the base materials for aluminum sputtering, and aluminum sputtering was performed to study IR thermal imaging, color difference, temperature change, and so on, and the relationship with infrared transmittance was assessed. The electrical conductivity was measured and the aluminum-sputtered nylon film demonstrated 25.6kΩ of surface resistance and high electrical conductivity. In addition, the electromagnetic wave shielding characteristics of the sputtering-treated nylon film samples were noticeably increased as a result of aluminum sputtering treatment as measured by the electromagnetic wave blocking characteristics. When NFi and NFa samples with single-sided sputtering were placed on the human body (sputtering layer faced the outside air) and imaged using IR thermographic cameras, the sputtering layer displayed a color similar to the surroundings, showing a stealth effect. Moreover, the tighter the sample density, the better the stealth function. According to the L, a, b measurements, when the sputtering layer of NFi and NFa samples faced the outside air, the value of a was generally high, thereby demonstrating a concealing effect, and the △E value was also high at 124.2 and 93.9, revealing a significant difference between the treated and untreated samples. This research may be applicable to various fields, such as the military wear, conductive sensors, electromagnetic wave shielding film, and others.

• 조명전기설비학회논문지
• /
• 제29권9호
• /
• pp.1-9
• /
• 2015

The aim of this study is to deduce color temperature and illuminance by conducting the preference & affective evaluation consequent on illuminance change of ambient light in case of the lighting method of ambient light mixed with task light in time of reading which is visual work action among the action in learning space. As a result of the prior survey on preferred lighting method in time of the act of reading targeting 20 experts before doing evaluation, the method of lighting mixed with ambient light and task light was found to be the highest. Such a result is analyzed to be attributable to the fact that the less the difference in illuminance of nearby space and work surface because of the mixed method of lighting, the less the glare, which makes a reader feels easy and concentrate on reading. On the basis of descriptive statistics of evaluation results and impact analysis by category, this study recommends the application of combinations of ambient light illuminance ranging from 40lx to 100lx with color temperature of 5500~6000K in case of the method of lighting mixed with general light and task light.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.210-218
• /
• 2018

The natural dye product market is expanding due to the recent interest in environmentally friendly products. This study examines dyeing using natural Coptidis Rhizoma. Chitosan and Tannin was treated to improve dyeability of Coptidis Rhizoma after finding the proper dyeing condition. In addition, dyeing characteristics were compared according to mordant types along with the mordanting methods for dye fixing and color change. The results indicated that the optimum dyeing condition was to treat the concentration of 5% (o.w.b.) at $80^{\circ}C$ for 90 minutes. By the chitosan and tannin treatments, K/S value of cotton fabrics by 3 times and those of wool fabrics by 2 times increased and color depthing of dyed fabrics was achieved after 2 cycles repetition. To improve dyeability, iron mordanting was most effective; in addition, the K/S Value of pre-mordanting fabrics versus post-mordanting fabrics increased the most. The color of the surface was changed to reddish yellow when Sn, Cu mordanting, and to greenish blue when Fe mordanting. The lightfastness of dyeing fabric with mordanting was weak at 1-2 grades, but the washing fastness was good for 4 grades and the rubbing fastness and sweat fastness were as good as those of the 3-4 grades. As a result, this study could help improve the dyeability of expensive Coptidis Rhizoma.

• 대한가정학회지
• /
• 제50권2호
• /
• pp.85-92
• /
• 2012

This was a study examining the fatliquoring of natural dyed cow skin with Coptis chinensis Franch. The K/S according to optimal dyeing condition, mordants and mordanting method was measured. And the surface, sections, tensile strength, elongation, stiffness and colorfastness according to post-dyeing fatliquoring were observed. The optimal conditions include 300%(o.w.f.), $50^{\circ}C$, 30 minites. Fe-simmordanting showed the highest dyeability. Coptis chinensis Franch showed a yellow color regardless of mordants and mordanting methods. Tensile strength and elongation increased in the case of simmordanting compared with untreated and the process of fatliquoring further increased. The softness significantly increased when fatliquored. Shrinkage was slightly reduced when dyed, but showed almost no change with fatliquoring. Lastly, color fastness increased overall with mordanting and partly increased with fatliquoring. The rubbing and light fastness were excellent Cu- mordanting, and drycleaning fastness also improved with Cr-mordanting.

• 한국연초학회지
• /
• 제19권1호
• /
• pp.57-63
• /
• 1997

The composition of leaf surface lipid in Flue-cured tobacco and their changes during curing was investigated. The flue-cured variety, Nicotiana tabacum cv. NC 82 was cultivated at Eumsung experiment station in 1996. The samples of riced leaves with different stalk Position(Lugs, Cutter, Leaf and Tips) and different curing stage at half yellowing(24hr), yellowing(48 hr) , color axing(72 hr), midrib drying(96 hr) and cured(120 hr) were collected for analysis of leaf surface lipid. $\alpha$ - and $\beta$ - 4, 8, 13-Duvatriene-1, 3-diol($\alpha$, $\beta$-DVT) were major components in leaf surface lipid extracted with methylene chloride and sugar ester was detected slightly DVT content was increased with ascending stalk position, but increasing trend of total hydrocarbon was not observed. While DVT was decreased throughout curing of tobacco leaves, hydrocarbon content did not show significant change during curing process. Twenty-two duvane compounds were detected by capillary GC in duvane fraction isolated from leaf surface lipid and of which 11 compounds were identified by GC-MS. These compounds were decreased with curing in all stalk position.

• 한국레이저가공학회지
• /
• 제18권2호
• /
• pp.1-4
• /
• 2015

This study is related to the surface hardening treatment to spheroidal graphite cast iron for die by using high power diode laser. Laser device used in this experiment is capable of real-time laser power control. This is because the infrared temperature sensor (two color pyrometer) attached to the optical system measures the surface temperature of specimen and adjusts the laser power in real time. The surface treatment was carried out with the change of heat treatment temperature at the beam travel speed 3 mm/sec. Hardened width and depth was measured and hardened zone was analyzed by micro vickers hardness test in order to research the optimum condition of heat treatment. The changes in microstructure of the hardened zone also was examined. As a result of hardness measurement and observations on microstructure of hardened zone, hardness increased over three times as compared with base metal because the martensite was formed on the matrix structure.

• 한국의류산업학회지
• /
• 제19권5호
• /
• pp.620-625
• /
• 2017

In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.10-19
• /
• 2006

Despite several recent attempts to measure the concentration of individual catechins by HPLC, it has not been so easy to separate catechins accurately. The aim of the present work is to provide a proper condition for separating each component of catechins by HPLC analysis, and also to evaluate the experimental variables including color differences, and metal ion contents after dyeing and mordanting. Four kinds of Catechins, (-)-epicatechin(EC), (-)-epicatechin gallate(ECG), (-)-epigallocatechin(EgC), (-)-epigallocatechin gllate(EgCG) were isolated from the residues after dyeing. Catechins in Korean green tea leaves are richer when e tea leaves are younger. Higher concentration of catechins owes it to e way it is processed. The contents of catechins adsorbed in silk fabrics after dyeing were in order of EGCG>ECG>EGC>EC. We have found $68\%$ uptake of EGCG, and 116.8mg of EGCG in the silk fabrics after it was dyed with $1\%$ Korean green tea extracts. The absorbance intensity and K/S values of dyed silk fabrics were increased with dyeing temperature and time. Only the surface color of the silk fabric dyed with green tea extracts was yellowish red, but it changed from yellowish red to red with an increase in the mordant concentration. Post-mordanted silk fabrics with ferrous sulfate changed from yellowish red to red and purple color shade. In a practical evaluation, there is no significant change in color after twenty times of the continuous dry cleaning process. However, post-mordanted fabrics with ferrous sulfate faded the brightness of color after dry cleaning. Dyeing silk fabrics with a Korean tea extract reduced the metal ion contents in the silk fabrics when compared to the untreated silk fabrics. Metal contents in silk fabrics dyed and post-mordanted with $1\%$ each metal solution were 0.194 ppm for Aluminum, 1.601ppm for Copper, and 0.334 ppm for Iron. After the post-mordanting process, the heavy metal ion absorption increased, which was mainly attributed to the catechins and polyphenols in dyed silk fabrics.

• 치위생과학회지
• /
• 제10권2호
• /
• pp.95-100
• /
• 2010

본 연구는 자가 미백제로 많이 사용되고 있는 10% Carbamide Peroxide에 NaF를 첨가하여 사용하였으며 미백 후 인공적으로 변색시킨 법랑질의 색, 경도 및 표면변화에 미치는 영향을 관찰하여 다음과 같은 결론을 얻었다. 1. 10% CP 미백처리군과 10% CP+NaF 미백처리군의 색조변화량은 미백 후 색조 변화를 보였으며 통계적으로도 유의한 차이를 나타냈으며 NBS unit로 환산해본 결과 미백처리군 모두 very much에 해당되어 임상적인 의미를 지니는 것으로 나타났다(p<0.001). 2. 10% CP 미백처리군은 미백처리 후의 법랑질 표면경도 값이 미백처리 전에 비해 감소하였으며 통계적으로도 유의한 차이를 나타냈다. 불소첨가 미백군은 미백처리 전과 비교하여 표면경도 값이 거의 변하지않았다. 3. 미백처리 전 후의 법랑질 표면에 대한 미세구조를 분석하기 위해 주사전자현미경과 원자현미경으로 관찰한 결과 미백처리 후 탈회현상에 의해 법랑질 표면이 거칠어짐을 관찰 할 수 있었으며 미백제와 함께 불소를 적용한 처리 군에서는 미백 처리에 의해 거칠어진 법랑질 표면이 불소에 의해 재광화가 됨을 관찰 할 수 있었다. 이상의 결과를 미루어볼 때 10% CP 치아 미백은 법랑질 표면에 영향을 미쳐 미백 후 치아의 시림이나 표면의 형태변화, 경도 값의 감소 등과 같은 부작용을 야기 할 수 있으므로 불소를 포함한 미백제의 사용이나 치아미백 후 불소도포를 시행함으로써 법랑질 표면의 재광화를 유도하여 치아미백 후 발생할 수 있는 여러 부작용을 감소시킬 수 있을 것으로 사료된다.