• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.89-90
• /
• 2022

Arc metal spraying is a widely used method for improving the performance of construction structures such as corrosion resistance and electromagnetic wave shielding. However, when arc metal spraying is applied to a concrete structure, adhesion performance may deteriorate. Therefore, the effect of each surface treatment method on the physical properties between the arc metal spray coating and concrete was reviewed by evaluating the deposition efficiency and adhesion performance according to the arc metal spray surface treatment method (surface reinforcing agent, roughening agent, and sealing agent). As a result, it is suggested as an optimal surface treatment condition to induce non-interface failure by using a roughening agent and to improve the properties of concrete and metal coatings by applying a surface reinforcing agent and sealing agent.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.915-924
• /
• 1996

The purpose of this paper is to investigate the surface roughness of glass ionomer cement during initial setting time followed by applying surface coating agent. No other finishing or polishing procedure is done and each surface coating agents (varnish, adhesive, gloss, sealant) are used after filling of glass ionomer cement. Surface roughness indices(Ra) are measured and surface contours are obtained electronically by Surfcorder SEF-30D(Kosaka laboratory Ltd., Japan). The results are as follows: 1. During initial setting time, surface roughness increases slightly regardless of surface coating agents. But it is statistically insignificant. (p>0.05) 2. Among surface coating agents used, Ra indices of group using varnish are high significantly compared to other groups regardless of elapsed time.(p<0.05) Among the groups which has used other surface coating agents except for the varnish group, similar Ra index all over the experiment is obtained, when compared to control group (no agent). 3. If no surface treatment is performed, tri-cure glass ionomer cement (Vitremer) has higher Ra Index than light cure glass ionomer cement (Fuji II LC) (t<0.05). But there is no difference between two groups in Ra index if any kinds of agents are applied except for sealant. (t>0.05)

• 보존과학회지
• /
• 제27권4호
• /
• pp.415-420
• /
• 2011

금속 유물의 부식 방지를 위하여 우레탄 코팅제를 제조하였다. 제조된 우레탄 코팅제를 이용하여 그 동안 금속유물 코팅제로 주로 사용된 아크릴계 코팅제의 광택성과 코팅 후에 나타나는 변색 등의 문제점을 해결하고자 하였다. 이를 위하여 합성된 우레탄 코팅제는 아크릴계의 코팅제보다 광택이 낮고 색상 변화가 적도록 제조하였다. 이 코팅제는 기존의 코팅제에 비하여 얇은 코팅 층을 형성하면서도 우수한 접착력을 나타내었으며, 다양한 주위 환경에 의해 나타나는 금속 유물의 표면 산화에 대한 저항력과 표면에서의 발수력이 우수하였다. 또한, 아세톤, 톨루엔, 자일렌 등의 유기용매에 쉽게 용해되는 가역성이 우수한 결과를 나타내고 있어 기존의 아크릴계 금속 유물 코팅 재료를 대체할 수 있는 안정적인 코팅제로 사용할 수 있을 것으로 판단된다.

• 콘크리트학회지
• /
• 제2권4호
• /
• pp.61-68
• /
• 1990

화산암재 경량골재의 구조용 경량콘크리트로서의 활용방안에 대한 기초적 자료를 제공할 목적으로 4종류의 피복 화산암재를 제조하여 각 시료의 비중, 흡수율, 단위용적중량, 공극율과 실적율등을 측정하고 각 시료를 사용하여 경량콘크리트를 제조하여 각 조건에 따라 압축강도, 단위용적중량, 슬럼프 등을 측정하였다. 실험결과를 요약하면 다음과 같다. (1) 피복 화산암재의 흡수율은 1.7~10.1%, 단위용적중량은 0.91~0.97t/㎥으로 나타났으며, 이 시료로 제조된 경량콘크리트의 압축강도는 162~215kg/$\textrm{cm}^2$으로 나타났다. (2)물시멘트비와 단위시멘트량을 증가시켰을 때 사용한 피복시료의 흡수율이 클수록 압축강도 감소율이 크게 나타나다. (3) 본 실험결과 피복 화산암재 제조시의 부착불량 현상만 해소된다면 표면피복제와 시멘트 페이스트를 함께 사용한 피복시료를 이용하여 낮은 흡수율과 높은 압축강도의 경량골재콘크리트를 제조 할 수 있음을 알 수 있다.

• 치위생과학회지
• /
• 제9권2호
• /
• pp.153-160
• /
• 2009

본 연구는 금속-도재 수복물 제작에 사용되는 Ni-Cr alloy와 Co-Cr alloy, 그리고 티타늄에 gold bonding agent를 도포하여 Au coating 층을 형성하였다. 각 시편의 절단면을 전자현미경으로 Au coating 층과 porcelain bonder, 그리고 불투명 도재간의 결합을 관찰하였고, 각 계면의 상태를 SEM/EDS 방법으로 조사하였다. 실험에서 사용된 재료와 방법의 범위 내에서 다음과 같은 결론을 얻었다. 1. Gold bonding agent를 사용하여 형성한 Au coating 층은 미세다공성을 가진 구조로 판단되었다. 2. Au coating 층과 porcelain bonder 그리고 불투명 도재간의 결합은 잘 일어나 보였다. 3. Au coating 층은 도재 소성과정에서 발생하는 산화층의 확산을 제한하는 것으로 관찰되었다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.56-61
• /
• 2015

In this study, the wear performance of manganese phosphate coating on SM45C with addition agent of Tartaric acid and Citric acid were investigated. The Surface morphology of manganese phosphate coating was examined by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDS). It is found that Mn, P, Fe, O and C. The crystal structure and thee composition was analysis and determined by using XRD. The XRD results indicated that manganese phosphate coatings are mainly composed of $(Mn,Fe)_5H_2(PO_4)_44H_2O$ and consists of a lot of close packed lump crystalline. Based on the time dependence of morphology and the weight of manganese phosphate coating, it shows that the phosphating process mainly includes three stages: corrosion of the substrate, creation and growth of phosphate crystal nucleus and thickening of manganese phosphate coating. The wear tests were performed in a ball on disc apparatus as per ASTM G-99 Standard. It was showed that the initial wear was quite high followed by low sludge.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.15-19
• /
• 2012

Both electrogalvanized and hot-dip galvanized steel sheets have been finally produced via organic-inorganic surface coating process on the zinc surface to enhance corrosion resistance and afford additional functional properties. Recently, POSCO has been developed a variety of chromate-free coated steels that are widely used in household, construction and automotive applications. New organic-inorganic hybrid coating solutions as chromate alternatives are comprised of surface modified silicate with silane coupling agent and inorganic corrosion inhibitors as an aqueous formulation. In this paper we have prepared new type of hybrid coatings and evaluated quality performances such as corrosion resistance, spot weldability, thermal tolerance, and paint adhesion property etc. The electrogalvanized steels with these coating solutions exhibit good anti-corrosion property compared to those of chromate coated steels. Detailed components composition of coating solutions and experimental results suggest that strong binding between organic-inorganic hybrid coating layer and zinc surface plays a key role in the advanced quality performances.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.21-28
• /
• 2014

경량골재의 내부공극을 통한 탄산가스 유입으로 인해 경량골재콘크리트는 보통콘크리트에 비해 탄산화가 더 빠르게 진행되는 문제점을 극복하고자, 4가지 표면코팅제로 코팅된 경량골재를 사용한 콘크리트에 대하여 탄산화 저항성을 보통 경량골재콘크리트, 보통콘크리트와 비교 분석하였다. 코팅경량골재를 사용한 콘크리트가 보통 경량골재콘크리트보다 우수한 탄산화 저항성을 보였으며, 특히 발수제보다는 고분자계 코팅제를 사용하였을 때 더 우수한 저항성을 나타내었다.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.98-102
• /
• 2015

A series of polyurethane-acrylate hybrids were synthesized by 2-step emulsion polymerization of a variety of acrylate monomers such as 2-hydroxy ethyl methacrylate (HEMA), methyl methacrylate (MMA). Experiment was performed to improve stability and emulsibility of surface treatment agent, and it was found that the polyurethane-acrylate hybrids having an optimum composition (MMA : 20%, LA(EO)3-S : 3% and TDA-7 : 5%) was shown to be quite surface active in the solid contents. These results suggests that the optimal polyurethane-acrylate hybrids in this study have high potential as top coating agent, which may have high gloss and excellent properties.