• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.773-776
• /
• 2005

An Experiment was carried out to study deburring in frilling hole on the Inclined exit surface. Two different deburring tools, exit surface angles, materials and cutting conditions were selected to check their performance using CNC machining center. In deburring operation, there are not only flat exit surfaces but also inclined exit surfaces which is described as inclination angle. Inclination of exit surface causes a quite different burr formation when comparing with flat surface. Deburring characteristics are analyzed according to the deburring tools and cutting conditions. Several strategies for a effective deburring on inclined exit surface were proposed.

• 보존과학회지
• /
• 제37권3호
• /
• pp.302-311
• /
• 2021

본 연구는 전통 옻칠 기법을 이용하여 금속표면을 코팅하고, 물성을 평가하여 옻칠의 금속코팅 적용성 여부를 알아보고자 했다. 이를 위해 SS275 금속 시편(60*60 mm)과 원주 생칠을 이용하였다. 또한 칠 횟수(1, 2, 3)와 가열온도(120℃, 150℃)를 변이조건으로 설정하여 총 6개의 시편을 제작하였다. 분석은 색도측정, 접촉각 및 표면에너지 측정, 내약품성 시험, Cross-cut 시험을 이용하였다. 분석결과 부식성이 개선되고 금속표면에 대한 옻칠의 밀착력이 우수함을 확인하였다. 접촉각 및 표면에너지는 큰 변화를 보이지 않았다. 또한 색도 역시 큰 차이는 보이지 않았다. 본 연구를 통해 금속 표면에 옻칠이 진행되면 방수성 및 방식성이 좋아짐을 확인하였으며, 적정한 옻칠 횟수와 가열온도를 확인하였다. 차후 경도와 마모율과 같은 물리적인 특성 연구와 일정한 두께로 옻을 칠하는 방안을 연구하여 금속의 적용 가능성을 확인하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.842-855
• /
• 2009

We present a physics-based blending method for the second order algebraic implicit surface. Unlike other traditional blending techniques, the proposed method avoids complex mathematical operations and unwanted artifacts like bulge, which have highly limited the application of the second order algebraic implicit surface as a modeling primitive in spite of lots of its excellent properties. Instead, the proposed method provides the designer with flexibility to control the shapes of the blending surface on interactive basis; the designer can check and design the shape of blending surfaces accurately by simply adjusting several physics parameter in real time, which was impossible in the traditional blending methods. In the later parts of this paper, several results are also presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.862-865
• /
• 2000

The object of this paper is to evaluate the surface roughness using the experimental equation of surface roughness, which is developed in turning by an orthogonal array method. $L_9{3^4}$ orthogonal array method, one of fractional factorial design has been used to study effects of main cutting parameters such as cutting speed, feed rate and depth of cut, on the surface roughness. And the analysis of variance (ANOVA)-test has been used to check the significance of cutting parameters. Using the result of ANOVA-test, the experimental equation of surface roughness, which consists of only significant cutting parameter - feed rate, has been developed. The coefficient of determination of this equation is 0.962.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.103-116
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.117-129
• /
• 1990

The mixed mode surface crack in finite-width plate subjected to uniform shearing has been analyzed in 3-D problem by using boundary element method. The calculations were carried out for the surface crack angles (${\alpha}$) of $0^{\circ}, 15^{\circ}, 30^{\circ}, 45^{\circ}, 60^{\circ}, and 75^{\circ}, $ and for the aspect ratio(a/c) of 0.2, 0.4, 0.6 and 1.0 to get stress intensity factors at the boundary points of the surface crack. For the aspect ratio of 1.0 and the surface crack angles, finite element method was used to check the results in this in this study. Comparison of the results from both method showed good agreement.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.21-27
• /
• 1991

이 논문에서는 periodic 균일 knot vector 뿐만아니라 open 균일 knot vector를 사용하여 선체형상을 Bi-cubic B-spline곡면으로 수식화하는 방법을 보인다. B-spline곡면을 형성하기 위한 B-spline control vertex는 기본 함수의 pseudoinverse matrix를 사용하여 결정된다. 주어진 offset과 형성된 선체곡면을 비교한 결과 잘 일치하였다. 곡면의 순정을 검토하기 위하여 Gaussian곡률을 많은 작은 곡면조각에 대해 계산하여 흑백의 농도 차이를 이용하여 도시화하였다.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.1-14
• /
• 1992

본 논문에서는 형상의 기하학적 특성을 나타내는 형상계수들로부터 B-spline 곡면식으로 표현 되는 3차원 자유곡면의 생성을 시도하고 있다. 이것은 형상계수들의 결정과 이들 형상계수들의 Coons 곡면 및 B-spline 곡면과의 결합으로 이루어진다. 본 방법의 유용성 확인을 위해서 구상선수 형상에 유사한 곡면의 생성을 시도해 보았다.

• 한국생산제조학회지
• /
• 제4권3호
• /
• pp.12-24
• /
• 1995

Various surface grinding experiments using resin bonded diamond abrasive wheels are carried out for tungsten carbide materials in order to minimize the damage on the ground surface and to purse the precise dimension compared to conventional grinding machine. When grinding quality is constant, theoretical grinding effect is changed according to the speed of workpiece. Accordingly, grinding forces, which are Fn, Ft, were analyzed for the machining processes of tungsten-carbide material to obtain optimum grinding conditions. Brief investigation is carried out to decrease the dressing efficiency of resinoid bonded diamond grinding wheel to grind tungsten-carbide. Truing is also carried out to provide a desired shape on a wheel or to correct a dulled profile. High quality in dimensional accuracy and surface are often required as a structural components, therefore 3-points bending test is carried out to check machining damage on the ground surface layer, which in one of sintered brittle material. From this experimental study, some useful machining data and information to determine proper machining condition for grinding of tungsten-carbide materials are obtained.