• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.69-79
• /
• 2011

In this study, empirical site amplifications and S-wave velocity profiles for shallow and deep soils are estimated using earthquake ground motion records in metropolitan Manila, the Philippines. We first apply a spectral inversion technique to the earthquake records to estimate effects of source, path, and local site amplification. The earthquake data used were obtained during 36 moderate earthquakes at 10 strong-motion stations of an earthquake observation network in Manila. The estimated Q value of the propagation path is modelled as $54.6f^{1.1}$. Most of the source spectra can be approximated with the omega-square model. The site amplifications show characteristic features according to surface geological conditions. The amplifications at the sites in the coastal lowland and Marikina Valley shows predominant peaks at frequencies from 1 to 5 Hz, while those in the central plateau are characterised by no dominant peaks. These site amplifications are inverted to subsurface S-wave velocity. We, next, discuss the relationship between the amplifications and average S-wave velocity in the top 30m of the S-wave velocity profiles. The amplifications at low frequencies are well correlated with the averaged S-wave velocity. However, high-frequency amplifications cannot be sufficiently explained by the averaged S-wave velocity in the top 30 m. They are correlated more with the average of S-wave velocity over depths less than 30 m.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.210-218
• /
• 2007

CEDI-BPM(Continuous Electrodeionization-Bipolar Membrane) has advantages due to high ion permselectivity through ion exchange membranes and the production of $H^+$ and $OH^-$ ions on the bipolar membrane surfaces for regeneration of ion exchange resin during electrodeionization operation. In this study, hardness materials were removed by the CEDI-BPM without scale formation and the ion exchange resins were electrically regenerated during the operation. The adsorption characteristic of ion exchange resin surface, the influence of flow rate on the hardness removal and electric regeneration were investigated in the study. The removal efficiency of Ca was higher than that of Mg in the CEDI-BPM, which was related to the high adsorption capacity of Ca on the cation exchange resin. With increasing flow rate, the flux of Ca and Mg was enhanced by the permselectivity of a cation exchange membrane. In the electric regeneration of CEDI-BPM, it was shown that the regeneration efficiency was higher with a lower regeneration potential applied between cathode and anode.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.47-55
• /
• 2017

The technology for hydrothermal reaction of organic waste is one of the promising process to improve energy efficiency of biomass waste recycling system since moisture contents of treated biomass could be reduced at 40% or less than by dehydration processes. For these reasons, many parts of the world are interested in hydrothermal reaction of organic waste. In this paper, drying performances were evaluated with and without hydrothermal reaction of organic wastes which are sewage sludge and food wastes. For the hydrothermal reaction, organic wastes were treated at $200^{\circ}C$ for 1hr. Drying time of treated organic waste by hydrothermal reaction was reduced. In case of food waste drying at $100^{\circ}C$, drying time of treated wasted was reduced more 52.9% than non-treated. Hence, drying performances of sewage sludge and food wastes should be improved by hydrothermal reaction. Drying rates of treated wastes were considerably increased at preheat period of drying characteristic curve as followings; at $80^{\circ}C$ sludge as 148%, $100^{\circ}C$ sewage sludge as 151%, $80^{\circ}C$ food waste as 209%, $100^{\circ}C$ food waste as 366%. It means the surface area of treated wastes could be increased with destruction of cell membrane by hydrothermal reaction. However, the designer and operator of drying process should be careful, since enhanced drying rate cause the extension the decreasing drying period.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.105-111
• /
• 2004

The parallel plate detector with dielectric film for dosimetry was designed to measure detection characteristic of 6 MV X-ray with medical linear accelerator. PTFE film was inserted into FEP films that are made by two one-side metal coated materials for ion source. The thicknesses of PTFE dielectric film was 100 ${\mu}{\textrm}{m}$ and the thickness of FEP dielectric film was 100 ${\mu}{\textrm}{m}$, respectively. This detector was fixed by two acrylic plate for physical hardness ad geometrical consistency. The geometrical condition for measurement with parallel-plate for detector was below; SSD=100 cm and the 5 cm depth between detector and phantom surface The major parameter of detector characteristics such as zero drift current, leakage current, charge response by applied voltage, reproducibility, linearity, TMR measurement, dose rate effect were measured. The zero drift currents are 8.3 pA and leakage currents are 10 pA. The charge response of applied voltage is showing linearity in 414 voltage. The measurement deviation of reproducibility in this detector is within 1% for dose and the linearity of applied dose shows in this detector. The TMR curves in phantom between this parallel plate detector and reference detector are matched within 3% deviation from maximum dose depth to 7.5 cm depth. It is considered that this dosimetric system is satisfactory for the purpose of the constancy check of the 6 MV x-ray from medical linear accelerator.

• 한국해양학회지
• /
• v.27 no.1
• /
• pp.78-90
• /
• 1992

The present study is aimed to investigate the relationship between the distribution of benthic macro fauna and environments in the Mangyung-dongjin tidal flat developed on the west coast of central korea. Samples were taken from 69 sites established on 8 transect lines running perpendicular to the coast. The 69 sites located in the range of -250 to 230 cm height from the mean sea level were categorized into 4 levels of exposure duration. The mean grain sizes of the surface sediments varied from 1.5 to $7.9{\varphi}$. Silty sands and sands were dominant sediment facies on the tidal flat. A total of 64 species of invertebrates was collected and the mean density was $1,335{\;}indiv{\cdot}\textrm{m}^2$. The dominant species was Laternula cf. limicola of Bivalvia (71% of total counts), followed by Umbonium thomasi of Gastropoda (22%), and Lingula anatina of Brachiopoda (2.6%). These 3 species comprised 95.5% of total individual number. The distribution of benthic animals was closely related with the duration of tidal exposure. Perinereis association was the characteristic for the most exposed area, and followed by Macrophthalmus and Bullacta-Mactra-Umbonium association along the degree of exposure duration.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.351-357
• /
• 2018

During radiation therapy, the patient is exposed to secondary radiation by scattered and leakage radiation. For the diagnostic radiation, guidelines for reducing the patient's exposure as the diagnostic reference level are provided. However, in the case of therapeutic radiation, even though the radiation dose by the secondary radiation is considerable, the prescription dose is not limited because of the reason of the therapeutic efficiency. The purpose of this study was to evaluate the secondary radiation that the patient could be received at the peripheral tissue during the radiotherapy using the linear accelerator with the radiophotoluminescent glass dosimeter. In addition, we measured the degree of saturation of the luminescent amount according to the build-up characteristic of the radiophotoluminescent glass dosimeter. As a result of carrying out this study, the exposure dose decreased drastically farther away from the treatment field. When the head was irradiated with 1 Gy, the neck could be exposed to 18.45 mGy. When the same dose was irradiated at the neck, 15.55 mGy of the head and irradiated at the chest, 14.26 mGy of the neck and irradiated at the pelvis, 1.14 mGy of the chest were exposed separately. The degree of saturation of the luminescent intensity could be overestimated by 1.8 ~ 4.8% depending on time interval for 3 days.

• ALGAE
• /
• v.19 no.4
• /
• pp.293-301
• /
• 2004

A chain-forming toxic din flagellate, Gymnodinium catenatum (Graham) was known as a paralytic toxin-producer among Gymnodinoid group. In the study, the effects of water temperature, salinity and irradiance on the growth of G. catenatum isolated from Yeosuhae Bay, Korea were investigated. Water temperature range in which G. catenatum showed specific growth rate higher than 0.3 day$^{-1}$ were above about 18${^{\circ}C}$. However, salinity did not have such an effect on growth of G. catenatum. The maximum growth rate (0.5 day$^{-1}$) was obtained at 25${^{\circ}C}$ and 30 psu. The specific growth rate (u) expressed as a polynomial equation as functions of temperature (T; ${^{\circ}C}$) and salinity (S; psu) was $\mu$ = 0.005·T$^2$ - 0.0001164 T$^3$ - 0.063-S + 0.005-S$^2$ - 0.00007608-S$^3$ - 0.003-T-S + 0.00005308-T$^2$-S. Thus, in aspects of water temperature and salinity, the species may be expected to survive in most Korean coastal waters from early summer to autumn. The irradiance-growth curve was described as = 0.16 (I - 10.4)/(1 + 21.8) at 18${^{\circ}C}$ and 30 psu, indicating a half-saturation (Ks) photon flux density (PFD) of 42.6$\mu$mol m$^{-2}s^{-1}$ and compensation PFD (I$_0$) of 10.4$\mu$mol m$^{-2}s^{-1}$. These characteristic responses to irradiance suggest that G. catenatum can reside at the sub-surface.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.53-64
• /
• 2007

The dynamic release behavior of Cs from high burn-up spent PWR fuel was experimentally performed under the conditions of a thermal treatment process such as voloxidation and sintering conditions. In voloxidation process, influence of the oxidation and reduction atmosphere on the Cs release characteristic using fragment type of spent fuel heated up to $1,500^{\circ}C$ was compared. In sintering process, temperature history effect on Cs release behavior was evaluated using green pellet under 4% $H_2/Ar$ environment. Temperature range for complete Cs release from spent fuel fragment under voloxidation condition was about $800^{\circ}C{\sim}1,200^{\circ}C$, but that of green pellet under the reduction atmosphere was $1,100^{\circ}C{\sim}1,400^{\circ}C$. Key parameters on Cs release behavior from spent fuel was powder formation as well as the diffusion rate of Cs compound to grain boundary and fuel surface.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.116-120
• /
• 2010

Overall total length of hydraulic pipe to transport the hot water in the domestic district heating network is above 3,000 Km approximately. This long pipe network requires a lots of the transport pumping power by surface friction of fluid. In this study, the drag reduction(DR) of Amin Oxide $C_{18}$ as non-ionic surfactant according to the fluid velocity, temperature and surfactant concentration under the condition of above $80^{\circ}C$ fluid temperature were investigated experimentally. Results showed that new amin oxide $C_{18}$ surfactant had DR of maximum 30% in fluid temperature of $80^{\circ}C$ and had 15% DR in fluid temperature over $100^{\circ}$ under short time test condition. And amine oxide had 155 hours duration time to keep the DR characteristic in the fluid temperature of $80^{\circ}$ and 1000 ppm concentration. But duration time of DR was decreased when fluid temperature increased.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.593-604
• /
• 2011

This study examines potential growth and different perspectives on green-walls, which are being re-evaluated recently. The aim is to identify the viewer preferences concerning the walls by collecting a wide spectrum of information to create an interior design related comprehensive and intellectual database. Also based on this proposition, choosing a green surface of indoor wall as a specific example stimulus, identifying a relationship betweeationsviewer's preference factors. The relationship will formulate detailed and absolute qualities, which will reach potential areas that the green walls can be widely applied in. As a result of a factor analysis, the viewers classified into the 3 factors as is pleasant, gorgeous and rich about the stimulus. Preferred key factors, which are closely related to emotional image language, were; cool, tidy, comfortable and beautiful. The common factors in preferred design stimulus, in order of importance are color>elements>image/form/plants. Specific levels of design factors according to relevance are contrast>furniture> modern>central/creeper foliage plants. In the meantime, this study is leading the process of quantitative measurement of green-walls to a new design direction and it is critical to consistently experimenting to back up the theory with solid evidence.