• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.353-360
• /
• 2016

Tests of hydraulic rock splitting were conducted using double packer at the 1, 2 free surface in the limestone mining and granodiorite Suksan area, respectively. The method of hydraulic rock splitting was applying hydraulic power in the interval layer using double packer. As a result of tests, a crack occurred. At about 6.5 MPa and 13 MPa, a crack occurred in 2 free surface. Any crack did not occur in the 1 free surface. Rather, used 1 double packer was broken in the 1 free surface. Also, it was confirmed that the water pressure of the interval increased through the existing crack and the new crack in the test areas.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.220-222
• /
• 2003

부정형 물체의 모양을 모델링 하는데 긴요하게 쓰이는 일반적인 음함수 곡면은 골격요소의 종류를 다양하게 선택함에 따라 모델링의 기능이 향상되는 반면 렌더링은 상대적으로 어려워진다. 본 논문에서는 점(point)과 함께 선분이나 원 등이 혼합된 골격 요소로 구성된 음함수 곡면의 렌더링을 위하여 interval method를 이용하는 광선 추적법을 제안한다. interval method는 점이 아닌 다른 모양의 골격 요소에 적용할 때는 난이도가 훨씬 증가하지만 광선과의 교차점을 구하는 등의 상대적으로 어려운 계산과정을 효과적으로 단순화 할 수 있다는 장점이 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.883-885
• /
• 2004

음함수 곡면은 부정형 물체의 모델링 성능이 탁월하여 다양한 골격요소가 사용된다. 골격요소의 모양이 다양할 수록 모델링 성능이 향상되는 반면 렌더링은 상대적으로 어려워진다. 따라서 본 논문에서는 다양한 골격요소를 사용하는 음함수 곡면을 interval method로 렌더링 하는 방법을 소개한다. 또한 정(point) 외에 복잡한 도형을 골격요소로써 사용할 때, interval method를 적용하는 경우 직면하게 되는 문제 해결 방법을 제안한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.9
• /
• pp.860-867
• /
• 2001

Absorption of water vapor into LiBr-$H_2O$ O solution flowing over a finned inclined surface is numerically investigated. The momentum, energy, and diffusion equation are numerically solved using a finite difference method. The four different shapes of the wall surfaces are considered to find the best surface for absorption assuming that the wall temperature and the surface tension are constant. The effects of the fin interval and Reynolds number are investigated. Based on the numerical results, it is known that the parabolic surface shows better absorption performance than the other surfaces, and that water vapor absorption increases gradually with decreasing the fin interval.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.66-69
• /
• 2003

This paper presents the procedures for the evaluation of the maximum surface roughness and the shapes of the cut remainder employing the ridge method. The shapes and the heights of the cut remainder are estimated by overlapping adjacent ridges in consideration of the various machining parameters: the feedrate. the path interval. The maximum surface roughness in plane cutting modes are derived as a function of the maximum effective cutter radius, R$\_$eff,max/. and the path interval ratio, $\tau$$\_$fp/, The predicted results are compared with the values estimated by the conventional roughness model.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.104-109
• /
• 2001

Nowadays, Industrial competition power is depended on that rapidly produce the customized products. Therefor, it is necessary to reduce period of product development. Thus, concurrent engineering that work many process at a time was appeared and Rapid prototyping was appeared, it is method that rapidly produce the prototype. If the graphic model was made by CAD, the prototype can be made in short term. That provide what the part was directly tested by the worker. It provide a worker with believable data. We study on the influence of surface roughness on injection interval and part angle at FDM.

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.481-496
• /
• 2012

Purpose: This paper aims at improving inefficiency of an existing posterior preference articulation method proposed for dual response surface optimization. The method generates a set of non-dominated solutions and then allows a decision maker (DM) to select the best solution among them through an interval selection strategy. Methods: This paper proposes an iterative posterior preference articulation method, which repeatedly generates the predetermined number of non-dominated solutions in an interval which becomes gradually narrower over rounds. Results: The existing method generates a good number of non-dominated solutions not used in the DM's selection process, while the proposed method generates the minimal number of non-dominated solutions necessitated in the selection process. Conclusion: The proposed method enables a satisfactory compromise solution to be achieved with minimal cognitive burden of the DM as well as with light computation load in generating non-dominated solutions.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1153-1156
• /
• 2002

In this parer, a high quality mesh generation method by using interval arithmetic is proposed. In the proposed method, the variance of a tangent vector at the point is considered by the automatic differentiation. From the variance, sampling points on the surface are judged whether it is adequate or not, which is calculated by the interval arithmetic. Then Delaunay triangulation is performed to the obtained sampling points, and a set of meshes is generated. The proposed method is hard to overlook the local variation of surfaces.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.3
• /
• pp.31-41
• /
• 2008

Purpose : The purpose of this study is to examine the muscle activity of shoulder stabilization according to change of supporting base interval between push-up bend and push-up plus position and is to prevent or treat a shoulder injury by the most effective exercise for rehabilitation. Methods : This study analyzed the muscle activity according to change of supporting base interval between push-up bend and push-up plus movement. The participants without neuromuscular disease were 25 students - 12 males and 13 females - all twenty or over and the surface electrode of EMG attached on pectoralis major, triceps long head, middle trapezius, lower trapezius, serratus anterior and latissimus dorsi. The process has practiced 3 sessions of supporting base interval - narrowing interval, two shoulder interval, broad interval - by push-up bend and push-up plus movement. Result : 1. The muscle activity of pectoralis major was significantly increased according to narrow interval of supporting base on push-up plus movement and was significant difference(p<.05). 2. The muscle activity of biceps was significantly increased according to narrow interval of supporting base on push-up bend movement(p<.05). 3. The muscle activity of middle or lower trapezius was a difference according to change of supporting base on push-up bend and push-up plus movement but was not significant difference. 4. The muscle activity of serratus anterior was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). 5. The muscle activity of latissimus dorsi was significantly increased according to broad interval of supporting base on push-up bend movement(p<.05). Conclusion : These results lead us to the conclusion that push-up bend exercise have the effect of muscle strength of biceps on narrowing interval, of serratus anterior or latissimus dorsi on broad interval and push-up plus exercise have the effect of muscle strength of pectoralis major on narrowing interval of support base.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.4
• /
• pp.87-92
• /
• 2013

In this study, we carried out the turning of plastic mold steel(STAVAX) with whisker reinforced ceramic tool(WA1) and analyzed ANOVA(Analysis of Variance) test. Multi-regression analysis was performed to find influential factors to surface roughness and to derive regression equation. Results are follows: From ANOVA test and confidence interval analysis of surface roughness, We found that influential factors to surface roughness was feed rate, cutting speed and depth of cut in order. From multi-regression analysis, we derived regression equation of STAVAX. it's coefficient of determination($R^2$) was 0.945 and It means that regression equation is significant. From experimental verification, we confirmed that surface roughness was predictable by regression equation. Compared with former research, we confirmed that increase of feed rate is the main cause of the growing of surface roughness and cutting force.