• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.101-111
• /
• 2008

This paper introduces a high-speed Reed-Solomon(RS) decoder, which reduces the hardware complexity, and presents an RS decoder based FEC architecture which is used for 40Gb/s optical communication systems. We introduce new pipelined degree computationless modified Euclidean(pDCME) algorithm architecture, which has high throughput and low hardware complexity. The proposed 16 channel RS FEC architecture has two 8 channel RS FEC architectures, which has 8 syndrome computation block and shared single KES block. It can reduce the hardware complexity about 30% compared to the conventional 16 channel 3-parallel FEC architecture, which is 4 syndrome computation block and shared single KES block. The proposed RS FEC architecture has been designed and implemented with the $0.18-{\mu}m$ CMOS technology in a supply voltage of 1.8 V. The result show that total number of gate is 250K and it has a data processing rate of 5.1Gb/s at a clock frequency of 400MHz. The proposed area-efficient architecture can be readily applied to the next generation FEC devices for high-speed optical communications as well as wireless communications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.471-477
• /
• 2014

In this paper, we propose a low-cost license plate recognition system based on smart cam system using Android. The proposed system consists of a portable device and server. Potable device Hardware consists of ARM Cortex-A9 (S5PV210) processor control unit, a power supply device, wired and wireless communication, input/output unit. We develope Linux kernel and dedicated device driver for WiFi module and camera. The license plate recognition algorithm is consisted of setting candidate plates areas with canny edge detector, extracting license plate number with Labeling, recognizing with template matching, etc. The number that is recognized by the device is transmitted to the remote server via the user mobile phone, and the server re-transfer the vehicle information in the database to the portable device. To verify the utility of the proposed system, user photographs the license plate of any vehicle in the natural environment. Confirming the recognition result, the recognition rate was 95%. The proposed system was suitable for low cost portable license plate recognition device, it enabled the stability of the system when used long time by using the Android operating system.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.544-551
• /
• 2014

This paper suggests an algorithm to measure low-level radiation by radiation measuring devices, and the other algorithm to improve reaction speed of the device to better respond to dramatic changes in radiation amount. The former algorithm to improve the accuracy of measuring low-level radiation takes advantage of a dual window radiation measurement method which is based on accumulated average of pulses gathered by a radiation measuring sensor. The latter algorithm is to enhance reaction speed of a measuring device to more sensitively react to dramatic changes in radiation amount by adopting a dual window radiation measurement method which analyzes data patterns newly put into for six seconds. To verify the suggested algorithms, a hardware-which consists of sensor and high-voltage generator, controller, charger and power supply circuit, wireless communication part, and display part-was used. Tests conducted on the dual window radiation measurement method as used in the suggested algorithm have proved that accuracy improves to measure low-level radiation of 5uSv/h, and linearity also gets better. Other tests were conducted to see whether the suggested algorithm enhances the reaction speed of a radiation measuring device so that the device responds better to dramatically changing radiation amount. The experimental results have shown meaningful changes in numbers after six seconds. Therefore, the conclusions are made that the algorithm enhances the reaction speed of the device.

• Journal of Environmental Health Sciences
• /
• v.38 no.6
• /
• pp.510-519
• /
• 2012

Objectives: This study was conducted in order to evaluate the microbiological contamination of the indoor air of the lunchrooms at child care centers and investigate the toxin genes and toxin production ability of food-borne pathogens. Methods: A total of 64 child care centers were sampled to test total aerobic bacteria, coliform bacteria, fungi, Staphylococcus aureus, Bacillus cereus and Salmonella spp. according to the Korea Food Code. All toxin genes of pathogens were detected using the Polymerase Chain Reaction method. The Sthaph. aureus enterotoxin was detected by a Staphylococcus aureus enterotoxin-reversed passive latex agglutination kit. The heamolysin BL (HBL) and non-heamolytic enterotoxin (NHE) produced by B. cereus were detected using a B. cereus enterotoxin-reversed passive latex agglutination kit and Bacillus diarrheal enterotoxin visual immunoassay kit, respectively. Results: The means of total aerobic bacteria and coliform bacteria were $1.91{\pm}1.84$ log CFU/plate and $0.47{\pm}0.62$ log CFU/plate, respectively. The mean of fungi also showed $0.59{\pm}0.71$ log CFU/plate. Among the pathogenic bacteria tested in this study, Staphy. aureus and B. cereus were detected in four (6.3%) and 21 (32.8%) out of 64 indoor air samples from lunchrooms in child care centers, respectively. All Staphy. aureus tested in this study possessed no toxin genes and did not produce enterotoxin. The detection rate of nheABC, hblCDA, entFM and ces toxin gene in B. cereus was 100, 57.1, 76.2 and 0%, respectively. B. cereus isolates were classified into four groups according to the presence or absence of toxin genes. The nheABC gene was the major toxin gene among B. cereus tested in this study. The HBL was detected in 11 out of 21 B. cereus isolates (52.4%) and three B. cereus isolates produced NHE (14.3%). Conclusion: The results indicated that the contamination by microorganisms in the indoor air of lunchrooms was unqualified to supply safe catering in child care centers. The ongoing control of indoor air quality is required.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.704-710
• /
• 2005

The objective of this experiment was to compare corn and wheat in finishing pig diets in order to determine whether performance, carcass quality, fatty acid composition or fat colour is altered by choice of cereal grain. A total of 126 crossbred pigs were used in this experiment. At the start of the experiment, a portion of the experimental animals were assigned to receive a wheat-based diet formulated using soybean meal as the sole source of supplementary protein. The remainder of the pigs were assigned to a corn-based diet formulated to supply a similar level of lysine (0.65%) and energy (3,300 kcal/kg DE). At two week intervals, a portion of the pigs on the corn-based diet were switched to the wheat-based diet so that a gradient was produced with pigs being fed the corn and wheatbased diets for different proportions of the finishing period ranging from 100% on wheat to 100% on corn. There were no significant differences in the growth rate of pigs fed the two diets (p = 0.834). Pigs fed wheat tended to consume slightly less feed (p = 0.116) and had a significantly improved feed conversion (p = 0.048) compared with pigs fed corn. Choice of cereal did not affect dressing percentage (p = 0.691), carcass value index (p = 0.146), lean yield (p = 0.134), loin fat (p = 0.127) or loin lean (p = 0.217). Fatty acid composition of backfat was unaffected by the cereal grain fed (p>0.05). Total saturated fatty acid content was 33.31% for both corn and wheat fed pigs (p = 0.997) while the polyunsaturated fatty acid content was 12.01% for corn fed pigs and 11.21% for wheat fed pigs (p = 0.257). The polyunsaturated/saturated ratio was 0.36 for pigs fed corn and 0.34 for pigs fed wheat (p = 0.751). Hunter Lab Colour Scores indicated no difference either in the whiteness or yellowness of the fat. In conclusion, wheat can substitute for corn in growingfinishing pig rations without detrimental effects on pig performance. There were no differences in either the fatty acid composition of backfat or in backfat colour indicating that the decision to use wheat vs. corn needs to be made on economic grounds rather than being based on their effects on fat quality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.939-946
• /
• 2011

In thermal power generation companies, the recycling of refined ash (LOI < 6%) obtained from a PC-firing furnace is beneficial for the companies, e.g., it can be used for making lightweight aggregates. However, ash having a high LOI, which cannot be reused, is still buried in the ground. To obtain refined ash, the re-burning of high-LOI ash (LOI > 6%) in a PC-firing furnace can be an alternative. In this study, a numerical analysis was performed to demonstrate the effects of ash re-burning. An experimental constant value was decided by TGA (thermo-gravimetric analysis), and a DTF (drop-tube furnace) was used in the experiment for calculating the combustion of ash. On the basis of the trajectory of the moving particles of coal and ash, it was concluded that supplying ash near the burner, which is located high above the ground, is appropriate. On the basis of numerical results, it was concluded that an ash supply rate of 6 ton/h is suitable for combustion, without affecting the PC-firing boiler.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.960-966
• /
• 2004

The purpose of this study was to evaluate the effects of protein supplementation of green tea waste (GTW) on the performance of lactating cows. Another aim was to increase resource utilization and to eliminate any environmental negative impact from the tea waste. GTW from a beverage company was ensiled at a low pH (<4.0) and high acetic acid and lactic acid concentration, and it contained high crude protein (CP, 34.8%), total extractable tannins (TET, 9.2%) and condensed tannin (CT, 1.7%). Two experiments were conducted to investigate the palatability and performance in lactating cows fed GTW. In the palatability trial, three lactating cows were allocated to three dietary treatments in a 3$\times$3 Latin square design. The animals were offered a total mixed ration (TMR) including GTW at rates of 0, 2.5 and 5.0% on a dry matter (DM) basis. Total DM intake was not different among the treatments. In the performance trial, four lactating cows were used in a 2$\times$2 Latin square design with a 3 week sampling period. GTW was incorporated into TMR at a rate of 5.0% on a DM and 10.0% on a CP basis. Thus GTW replaced alfalfa hay and soybean meal at a level of 25.0% on a DM. DM and CP intake were not affected by the inclusion of GTW, whereas TET and CT intake were significantly increased (p<0.001). Milk production, milk composition and the efficiency of milk production were not altered by the GTW inclusion. Although ruminal pH and VFA, and blood urea nitrogen were not changed, ruminal $NH_{3}-N$ and plasma total cholesterol were relatively low in the GTW group, but not significantly different. The excretion of urinary purine derivatives and estimated MN supply were also not significantly affected by GTW treatment. It is therefore concluded that GTW can be used as a protein source without any detrimental effects on the performance of lactating cows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.120-123
• /
• 2008

This experiment was conducted to investigate the effect of different nipple angles on water disappearance in growing pigs, which is defined as the water which leaves the watering device but is not consumed by the pig. This water adds to the volume of the total waste slurry. Four crossbred pigs averaging $70.0{\pm}1.4$ kg were assigned into 1 of 4 treatments using a $4{\times}4$ Latin-square design. Treatments were distinguished by the angle between nipple terminal and the perpendicular wall. These angles were: 1) NA-30 (= Nipple Angle $30^{\circ}$), 2) NA-45 (= Nipple Angle $45^{\circ}$), 3) NA-60 (= Nipple Angle $60^{\circ}$) and 4) NA-90 (= Nipple Angle $90^{\circ}$). All of the nipples were fixed at shoulder height of each pig. After a 7-day adaptation period, samples were collected from each pig for 4 days, followed by a day for change-over. Pigs were fed a 0.8 kg diet twice daily at 08:00 and 20:00 and supplied water ad libitum. Throughout the experimental period, pigs in the NA-30 treatment group showed greater water disappearance than other treatments. Water disappearance was the lowest for the NA-60 treatment group (p<0.01). The percentage of water disappearance to the water supply was significantly reduced in the NA-60 treatment group (p<0.01). Water intake was the same for all the treatment groups. The rate of water disappearance per unit of water intake was significantly decreased in pigs in the NA-60 treatment group compared to other groups (p<0.01). These results suggested that the nipple angle for growing pigs should be $60^{\circ}$ to reduce water disappearance and, subsequently, the amount of waste generated.