• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3289-3298
• /
• 2011

The region trunk line railroad route considering regional characters is the final aim of railroad management to operators and passengers. For reflecting these aspect to make policies, The study has been performed by defining and analyzing the informations. According to the methodological and political research, First of all, The feature for demand and supply of railroad in the region trunk line railroad route is that demand aspect was excessively influenced by supply aspect. The demand sensitivity was measured very high on the supply changes. The survey, Containing the regional characters, result the railway and bus use patterns are clearly different and this feature is simiral to that of janghang and pohang district. also, In railroad case, Demand shifts from railroad to other transport sensitively. Therefore, We make some new index besides existing index, which like to management index, rate of boarding, rate of using. After that, We suggest passengers and operator's win-win alternatives.

• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.7-13
• /
• 2016

This paper presents the meter-out and meter-in speed control characteristics of a pneumatic cylinder with relief valve type cushion device. The piston displacement and velocity are measured to investigate high speed driving performance with variation of the pressure setting in relief valve, air supply pressure, load mass, the supply and exhaust flow rate from the cylinder. Also, the internal pressures and temperatures driving pressure and cushion chamber are measured. The piston displacements and velocities of meter-out and meter-in control are compared experimentally determined data. A comparison experimental data meter-out and meter-in control show that a relief valve type cushion device is suitable for high speed pneumatic cylinders. The desired response characteristics of piston displacement and velocity are satisfactory adjust the pressure setting of a relief valve with varying system parameters such as air supply pressure, load mass and controlled flow rate.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.4
• /
• pp.276-289
• /
• 1989

The airflow characteristics in both the upper plenum and the clean space of clean room are investigated by measuring the pressure distribution of the upper plenum and the velocity profile in the clean space, at the various conditions of the supplied airflow rate, the volume of upper plenum and the air supply type. The performance of vertical air supply type and horizontal air supply type is analyzed in terms of the airflow uniformity which is frequently used in indicating the clean room performance, and the relations among the volume of upper plenum, the supplied airflow rate and the airflow uniformity are confirmed. The results of this experimental study can be applied to the designing of the upper plenum of clean room.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.115-132
• /
• 2007

Implementing the automatic identification in supply chain management is essential for effective and efficient process control. Though the GTIN based bar code system is generally used as an automatic identification method in most industries, it can not identify individual item, and is not appropriated for products' reliability and safety management. So the RFID system with EPC is considered as a better solution for resolving those problems. This study reviewed automatic identification code systems and the attributes and characteristics of RFID Gen 2 which became a global standard recently for supply chain management. Particularly, this study analyzed RFID Gen 2 systems' read rates on various conditions including distances between tags and readers and between antennas, condensation, and several packing materials in practical supply chain environment. The results of this study showed that the RFID Gen 2 had high read ratio in practical application and would be adopted as a new automatic identification means for traceability systems.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.89-92
• /
• 2004

The influence of a single fracture intersection on density-driven immiscible flow is compared between wetting (water into air) and nonwetting (Trichloroethylene into water) flows. At low supply rates, the intersection acted as a hysteretic gate to pulsed flow of the wetting phase, but had minimal influence on nonwetting phase flow. For both cases, increasing the supply rate led to the formation of continuous fluid tendrils that crossed the intersection without interruption. The wetting experiment returned to pulsed flow as the supply rate was decreased, while the nonwetting experiment maintained a continuous flow structure. Results suggest a fundamental difference between wetting and nonwetting phase flows in fracture network.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.90-95
• /
• 2004

In this study, for the crankshaft bearing design adapting discontinuous oil supply system, analyses were conducted to determine the lubrication characteristics such as oil flow rate and increase of oil temperature at main bearing and connecting rod bearing. Additionally, supplied oil pressure and temperature effects on the bearings were simulated to figure out lubrication characteristics on the bearings. Finally the effects of increasing the bearing width and clearance were introduced on the lubrication characteristics.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.152-154
• /
• 2005

We demonstrate a simple $CO_2$ laser by controlling firing angle of a TRIAC switch in ac power line. The power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply does not need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. In order to control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of TRIAC gate is varied from $45^{circ}$ to $135^{circ}$. A ZCS(Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control the gate signal of the TRIAC precisely. The maximum laser output of 40W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60Hz, and a TRAIC gate firing angle of $90^{circ}$.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.51-57
• /
• 2006

Recently, youth unemployment is not a mere economic problem in Korea. It could be developed into a serious social problem. It has been long since youth unemployment rate was more than double in total unemployment rate, which stood at 3.5 percent in 2005 and then the inactivity among the younger job-seekers is appearing to be chronic. Hence, this paper examines the status and causes of the youth unemployment problem and studies the possibility to apply the Demand-Supply Chain Management to the problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.12
• /
• pp.3286-3309
• /
• 2023

This study empirically investigates the impact of informatization on China's inbound tourism development. The analysis utilizes data on the number of inbound tourist arrivals in 30 Chinese provinces from 13 tourist origin countries between 2004 and 2016. The regional informatization level is measured by the internet penetration rate. It is found that informatization in tourist destination provinces has a significant positive impact on inbound tourism. Moreover, the local public service supply plays a moderating role. The positive effect of informatization is stronger in regions with better public services. The study results imply that China can boost its inbound tourism by further improving the level of informatization as well as local public services.

• Health Policy and Management
• /
• v.33 no.4
• /
• pp.411-420
• /
• 2023

Background: The purpose of this study was to analyze the demand and supply status of patient beds by type of medical institution, categorized into 70 clinical privilege, in order to understand the regional bed supply situation. Methods: Utilizing the 70 clinical privilege defined by the Ministry of Health and Welfare, we calculated bed demand and supply quantities from 2019 to 2021 using data from Statistics Korea and the Health Insurance Statistical Yearbook. The bed demand calculation formula was based on the detailed guidelines for the medical sector by the Korea Development Institute and the 3rd edition of bed supply basic policies announced by the Ministry of Health and Welfare. Additionally, to mitigate distorted bed supply situations caused by factors such as regional levels and patient outflows, we classified bed supply types using the population decrease index indicator published by the Ministry of Public Administration and Security. Results: Among the 70 clinical privilege, it was analyzed that a relatively balanced bed supply situation exists overall, irrespective of the type of healthcare institution. However, in medical institutions at or above the level of hospitals, regions with bed supply ratios exceeding 20% compared to demand, particularly in institutions at or above the level of general hospitals, showed a relatively high rate of demand diversion. Conclusion: We have identified the bed supply types in the 70 clinical privilege in South Korea. Based on the results of this study, we emphasize the need for bed supply policies that consider regional characteristics. It is expected that this research can serve as fundamental data for future efforts aimed at managing or rectifying bed supply imbalances on a regional basis.