• 한국항공우주학회지
• /
• 제31권4호
• /
• pp.8-15
• /
• 2003

본 연구는 적분 방정식과 반복 "오차-수정" 개념을 이용하는 Takanashi의 이론에 기초한 초음속 실용적인 설계방법의 개발 결과로서, 형상의 수정량은 목표 압력분포와 설계대상의 압력분포와의 차를 경계조건으로 이용해 LSP 방정식을 풀므로써 계산되어진다. 이 연구에서는 Green의 정리를 이용하여 편미방정식 형태의 LSP 방정식을 적분방정식으로 변환하여 계산하는 방법을 이용하고 있다. 여기서는 Isolated wing과 wign-nacelles 두가지 경우의 설계를 예로 들었다.

• Advances in aircraft and spacecraft science
• /
• 제9권2호
• /
• pp.119-130
• /
• 2022

Supersonic projectiles like rockets, missiles, or aircraft find various applications in the field of defense. The shape of the wings is mainly designed as wedge shape or delta wings for supersonic vehicles. The study of supersonic flows over the wedges and flat plate delta wings around the large scale of incidence angle is considered in the supersonic projectile. In the present paper, the prime attention is to study the pressure at the nose of the plane wedge over the various Mach number and the various angles of incidence. Ghosh piston theory is used to obtain the pressure distribution analytically, and the results are compared with CFD analysis results. The wedge angle and Mach number are the parameters considered for the research work. The range of wedge angle is 50 to 250, and Mach number is 1.5 to 4.0 are considered for the current research work. The analytical results show excellent agreement with the CFD results. The results show that both the parameters wedge angle and Mach number are influential parameters to vary the static pressure. The static pressure increases with an increase in Mach number and wedge angle.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.173-176
• /
• 2004

In this study, the multidisciplinary aerodynamic-structural optimal design is carried out for the supersonic fighter wing. Through the aeroelastic analyses of the various candidate wings, the aerodynamic and structural performances are calculated such as the lift coefficient, the drag coefficient and the deformation of the wing. In general, the supersonic fighter is maneuvered under the various flight conditions and those conditions must be considered all together during the design process. The multi-point design, therefore, is deemed essential. For this purpose, supersonic dash, long cruise range and high angle of attack maneuver are selected as representative design points. Based on the calculated performances of the candidate wings, the response surfaces for the objectives and constraints are generated and the supersonic fighter wing is designed for better aerodynamic performances and less weights than the baseline. At each design point, the single-point design is performed to obtain better performances. Finally, the multi-point design is performed to improve the aerodynamic and structural performances for all design points. The optimization results of the multi-point design are compared with those of the single-point designs and analyzed in detail.

• Wind and Structures
• /
• 제29권6호
• /
• pp.457-469
• /
• 2019

In this paper, a numerical solution is presented for supersonic flutter analysis of cantilever non-symmetric functionally graded (FG) sandwich plates. The plate is considered to be composed of two different functionally graded face sheets and an isotropic homogeneous core made of ceramic. Based on the first order shear deformation theory (FSDT) and linear piston theory, the set of governing equations and boundary conditions are derived. Dimensionless form of the governing equations and boundary conditions are derived and solved numerically using generalized differential quadrature method (GDQM) and critical velocity and flutter frequencies are calculated. For various values of the yaw angle, effect of different parameters like aspect ratio, thickness of the plate, power law indices and thickness of the core on the flutter boundaries are investigated. Numerical examples show that wings and tail fins with larger length and shorter width are more stable in supersonic flights. It is concluded for FG sandwich plates made of Al-Al₂O₃ that increase in volume fraction of ceramic (Al₂O₃) increases aeroelastic stability of the plate. Presented study confirms that improvement of aeroelastic behavior and weight of wings and tail fins of aircrafts are not consistent items. It is shown that value of the critical yaw angle depends on aspect ratio of the plate and other parameters including thickness and variation of properties have no considerable effect on it. Results of this paper can be used in design and analysis of wing and tail fin of supersonic airplanes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1198-1203
• /
• 2000

In this study, a nonlinear aeroelastic analysis system for the fighter wing with tip-store has been developed additionally in the transonic and supersonic flow region. The unsteady CFD code based on the transonic small disturbance theory has been incorporated to consider the numerical capability for the aerodynamic nonlinear effects. The coupled time-integration method is used to observe the detailed nonlinear aeroelastic responses for elastic wings in their flight. condition. A conservative wing-box model of a fighter wing with tip-store is modeled by MSC/PATRAN and the corresponding free vibration analysis has been performed by MSC/NASTRAN. The results of flutter analyses are presented in the subsonic, transonic and supersonic flow regime.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.257-272
• /
• 2019

Numerical study of the flutter of a plate on a viscoelastic foundation is carried out in the paper. Critical velocity of the flutter of a plate on an elastic and viscoelastic foundation is determined. The mathematical model for the investigation of viscoelastic plates is based on the Marguerre's theory applied to the study of the problems of strength, rigidity and stability of thin-walled structures such as aircraft wings. Aerodynamic pressure is determined in accordance with the A.A. Ilyushin's piston theory. Using the Bubnov - Galerkin method, the basic resolving systems of nonlinear integro-differential equations (IDE) are obtained. At wide ranges of geometric and physical parameters of viscoelastic plates, their influence on the flutter velocity has been studied in detail.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.385-394
• /
• 2012

아음속-초음속 패널법(panel method)을 이용하여 항공기의 정적 안정성 미계수와 동적 안정성 미계수 및 조종미계수를 예측할 수 있는 프로그램을 개발하였다. 사용된 코드는 아음속-초음속 소스(source)와 말굽 와류(elementary horse shoe vortex)의 분포를 사용하고, 그 분포의 크기는 얇은 물체 근사(thin body approximation)을 적용하여 간략히 한 경계 조건을 이용하여 계산하였다. 항공기에 부착된 물체 좌표계에서 준정상(quasi-steady) 해석을 통해서 항공기 3축의 댐핑 계수를 예측하였다. 개발된 코드는 삼각날개(delta-wing)의 중립점(neutral point), 롤, 피치 댐핑 계수의 이론치와 비교하여 검증하였다. 마지막으로 F-18의 정적, 동적 안정성 미계수와 조종 미계수를 풍동 시험치와 계산치에 비교하여 개발한 코드의 정확성과 유용성을 확인하였다.

• 한국항공우주학회지
• /
• 제48권2호
• /
• pp.127-134
• /
• 2020

고초음속 항공기는 초음속 비행 중 공력 가열에 의하여 높은 온도 환경에 노출되기 때문에 동체 및 날개 구조물은 더블 패널 형태의 열 차폐 구조로 설계하여 기체 내부로 높은 온도의 열이 전달되는 것을 막는다. 얇은 두께의 더블 패널 외피는 초음속 항공기의 고출력 엔진 소음과 제트 유동에 의한 음향 하중에 노출되어 음향 피로 손상이 발생할 수 있다. 따라서 열음향 복합 하중을 받는 초음속 항공기 외피 구조의 거동 확인과 피로수명 예측이 필요하다. 본 논문에서는 열음향 복합 하중을 모사할 수 있는 열음향 시험 장치를 설계/제작하여 열음향 하중이 적용되는 티타늄 시편의 열음향 시험을 수행하였다. 열음향 복합 하중에 의한 구조물의 동적 거동을 확인하였으며, 시편 단위 열음향 시험 결과와 유한요소해석 결과를 비교하여 해석 모델을 검증하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.331-334
• /
• 2010

The supersonic speeds slowing down by shock waves is a common problem during the transonic region. So how to study the status of shock on the surface of airplane and wings is crucial adjective during transonic region. However, the theoretical and computational transonic flow problems were very hard. This paper introduced using Navier-Stokes Schemes to study characteristics of AGARD Wing 445.6 by ANSYS CFX in transonic region. From simulations results, as the Mach number increases, shock waves appear in the flowfield, getting stronger as the speed increases, these shock waves will lead to a rapid increase in drag.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.864-872
• /
• 2002

In this study, the effect of planform curvature on the stability of coupled flow/structure vibration is examined in transonic and supersonic flow regions. The aeroelastic analysis for the frequency and time domain is performed to obtain the flutter solution. The doublet lattice method(DLM) in subsonic flow is used to calculate unsteady aerodynamics in the frequency domain. For all speed range, the time domain nonlinear unsteady transonic small disturbance code has been incorporated into the coupled-time integration aeroelastic analysis (CTIA). Two curved wings with experimental data have been considered in this paper MSC/NASTRAN is used for natural free vibration analyses of wing models. Predicted flutter dynamic pressures and frequencies are compared with experimental data in subsonic and transonic flow regions.