• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.481-484
• /
• 2004

TiO$_2$ and TiO$_2$-CdS powders which were expected to be highly activated photocatalysts were prepared using supercritical fluid method (SCF). The prepared photocatalyst TiO$_2$ powders were crystalline of anatase and ultrafine spherical powders with large specific surface area. When photodecompositoion reaction was done with TiO$_2$ powders prepared by SCF as a photocatalyst in DCA (Dichloroactic Acid) solution, a hazardous organic compound, the photocatlyst, properties of TiO$_2$ powders prepared by SCF were better than that of commercial TiO$_2$ powders.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.197-201
• /
• 2001

Extraction efficiency of ${\beta}-ecdysone$ in Achyranthis radix was investigated using the methods of solvent extraction and supercritical fluid extraction (SFE). The optimum SFE conditions for the analysis of ${\beta}-ecdysone$ in A. radix were 300 atm, $80^{\circ}C$, 100 ml of extraction volume, and 20% ratio of modifier(methanol). As revealed through SFE, detection limit of ${\beta}-ecdysone$ in A. radix was 5 ng and recoveries of ${\beta}-ecdysone$ in A. radix shoots and root were $90.7{\sim}93.5%$ and $77.8{\sim}81.9%$, respectively. Recoveries of ${\beta}-ecdysone$ in A. radix shoots and root through solvent extraction were $76.4{\sim}93.0%$ and $80.6{\sim}93.1%$, respectively. ${\beta}-Ecdysone$ content was determined to be highest at 654.9 ppm in the first year A. radix roots harvested in August.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.13-18
• /
• 2008

For the evaluation of brominated flame retardants included in polymeric electronic devices, we investigated the extraction methods and solvent systems for four different types of polymers of PC (polycarbonate), PP (polyropylene), PET (poly(ethylene terephthalate)) and PBT (poly(butylene terephthalate)) using different solvent systems of hexane/acetone, THF, toluene, and THF/toluene. In order to compare the extraction efficiency of different methods and solvent systems, the deca-BDE (decabromo diphenyl ether) flame retardant was included in PC, PP, PET and PBT systems and subsequently extracted by soxhlet, ultrasonic, accelerated solvent, microwave and supercritical fluid extraction methods. The amount of the extracted flame retardant was monitored to evaluate the extraction efficiency. The ultrasonic extraction method was found not to be acceptable as an extraction method for the polymer systems mainly due to a low salvation efficiency of the organic solvents. Soxhlet, accelerated solvent and microwave extraction methods exhibited over 80% of extraction efficiency for toluene. The supercritical fluid extraction method, which has been used as an extraction method for flame retardants in polymers, showed the extraction efficiencies of ca. 100% for PC and PP in the optimal extraction conditions of $60^{\circ}C$ and 120 bar.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.241-251
• /
• 2020

This study was performed to develop the cosmetics containing extract of U.davidiana, which has been confirmed as a functional ingredient of anti-microbial, anti-oxidant, and anti-inflammatory effects, and also to evaluate the improvement effects of dry and sensitive skin such as atopic dermatitis. Toxicity tests of the Ulmus davidiana supercritical fluid residue 60% EtOH extracts(USCFR), Ulmus davidiana supercritical fluid extracts(USCF) and preliminary formulations, DKBP-1903(gel), containing the USCFR and USCF were determined to be 'Non-toxic'. Based on this, the stability test of the lotion, cream, gel formulation was conducted and the results showed that cream and gel formulation were stable. A 48-hour moisturizing sustainability test and the improvement test on the pruritus caused by dryness were selected for the cosmetic efficacy test to evaluate the improvement of atopic dermatitis and as a result both cream and gel have been found to be relatively safe moisturizers that can help dry and sensitive skin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.698-704
• /
• 2020

Although various biological extracts derived from the resources from Jeju are currently being developed for cosmetic materials, few studies using Brown algae from Jeju have been conducted. This study identified materials with high antioxidant levels and examined their whitening effects to assess their feasibility as potential cosmetic resources. Brown algae from Jeju (Undaria pinnatifida (Harvey) Suringar, Laminaria japonica, Ecklonia cava, Hizikia fusiforme (Harvey) Okamura (HF), and Sargassum fulvellum (Turner) C. Agardh (SF) were processed using a supercritical fluid system at 50℃ and 400 bar, and their total phenol content, antioxidant activity, tyrosinase inhibition, and primary skin irritation were measured. Of all the samples, only SF using the supercritical fluid system (SFS) displayed concentration-dependent behavior for the total phenol content (p<0.05). Among the samples, the antioxidant activity of SFS was significantly higher (p<0.05) and the one increased at higher concentrations (p<0.05). On the other hand, tyrosinase was inhibited to a greater extent with HF than the others. The primary skin irritation tests showed that none of the samples were skin irritants. This study confirmed the feasibility of using Phaeophyceae from Jeju as potential cosmetic materials, where the samples can be selected and utilized based on the required physicochemical properties.

• KSBB Journal
• /
• v.16 no.3
• /
• pp.233-236
• /
• 2001

Because of casehardenign effect of amorphous paclitaxel, residual solvents, methylene chloride and emthanol could not be reduced to the maximum value allowed, 600 ppm and 3,000 ppm, in accord with the guidelines issued by the International Conference on Harmonization (ICH, 1997), using rotary evaporation and successive drying in a vacuum oven. However, methylene chloride and methanol were reduced to 486 ppm and 403 ppm, respectively using supercritical $CO_2$ on purified paclitaxel. The optimum pressure and operating time were 80 bar and 30 min at fixed operating temperature ($40^{circ}C$). This approach serves as a novel application of supercritical fluid extraction to remove residual solvents from active pharmaceutical ingredients.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.109-113
• /
• 1999

Supercritical $CO_2$ chromatography was applied for purification of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from fish oil. Various supercritical $CO_2$ pressures were tested to find out the pressure effects on solubility and selectivity of low fatty acids in the silver nitrate column. The solubility of low fatty acids was increased as the supercntical $CO_2$ Pressure increased. However, the selectiviy between low fatty acids and EPA waw decreased. Stepwise density gradient method was applied to increase the purification efficiency of EPA. Low fatty acids were easily separated at the early elution steps with low $CO_2$ densities. Successive fractions containing 92.1~97.8% of EPA were collected. The average concentration of three purified fractions was 95.6% with the recovery rate of 30%.

• Journal of Powder Materials
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2001

The conventional debinding process in metal injection molding is very long time-consuming and unfriendly environmental method. Especially, in such a case of injection molded parts from hard and fine metal powder, such as WC-Co, an extremely long period of time is necessary in the conventional slow binder removal process. On the other hand, supercritical debinding is thought to be the effective method which is appropriate to eliminate the aforementioned inconvenience in the prior art. The supercritical fluid has high diffusivity and density, it can penetrate quickly into the inside of the green metal bodies, and extract the binder. In this paper, super-critical debinding is compared with wicking debinding process. Wax-based binder system is used in this study. The binder removal rate in supercritical $CO_2$ have been measured at $65^{\circ}C$, 75$^{\circ}C$ in the pressure range from 20 MPa to 28 MPa. Pores and cracks in silver bodies after sintering were observed using SEM When the super-critical $CO_2$ debinding was carried out at 75$^{\circ}C$, almost all the wax (about 70 wt% of binder) was removed in 2 hours under 28 MPa and 2.5 hours under 25 MPa.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.69-77
• /
• 2011

In this study, poly (L-lactic acid) (PLLA) microparticles containing gemcitabine hydrochloride were prepared by a supercritical fluid process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide as antisolvent. The influence of process parameters such as temperature, pressure, $CO_2$ and solution flow rate, solution concentration, and feed ratio of drug to polymer on the morphology and characteristics of the microparticles was studied in detail. The gemcitabine-loaded microparticles exhibited a spherical shape with a smooth surface. The entrapment efficiency of gemcitabine increased with increasing temperature, solution concentration and $CO_2$ flow rate and with decreasing drug/polymer feed ratio. The maximum drug loading obtained from the ASES process was found to be about 11%. The ASES-processed PLLA microparticles containing gemcitabine showed a relatively high initial burst due to the presence of surface pores on the microparticles and the poor affinity between drug and polymer.

• Korea-Australia Rheology Journal
• /
• v.20 no.4
• /
• pp.235-243
• /
• 2008

The aim of this study is to explore the possibility of incorporating supercritical carbon dioxide ($scCO_2$) into twin screw extrusion process for the production of polypropylene-clay nanocomposite (PPCN). The $CO_2$ is used as a reversible plasticizer which is expected to rapidly transport polymeric chains into the galleries of clay layers in its supercritical condition inside the extruder barrel and to expand the gallery spacings in its sub-critical state upon emerging from die. The structure and properties of the resulting PPCNs are characterized using wide-angle X-ray diffraction (WAXD), transmission electron microscopy (TEM), rheometry, thermogravimetry and mechanical testing. In the processing of the PPCNs with $scCO_2$, optimum $scCO_2$ concentration and screw speed which maximized the degree of intercalation of clay layers were observed. The WAXD result reveals that the PP/PP-g-MA/clay system treated with $scCO_2$ has more exfoliated structure than that without $scCO_2$ treatment, which is supported by TEM result. $scCO_2$ processing enhanced the thermal stability of PPCN hybrids. From the measurement of linear viscoelastic property, a solid-like behavior at low frequency was observed for the PPCNs with high concentration of PP-g-MA. The use of $scCO_2$ generally increased Young's modulus and tensile strength of PPCN hybrids.