• 한국연초학회지
• /
• 제18권1호
• /
• pp.92-99
• /
• 1996

A mathematical model of the pressure gradient of supercritical CO2 in a vertical tobacco bed was developed in this study. In particular, the compaction of the tobacco as a function of temperature and CO2 flow is included in the model. Downflow of CO2 (low condition is described. At velocities in excess of 0.6 cm/sec at 7$0^{\circ}C$, there is a large increase in pressure gradient for beds deeper than about 0.5 m. The proposed model offers a better understanding of operating the process using supercritical CO2.

• 분석과학
• /
• 제10권5호
• /
• pp.350-356
• /
• 1997

초임계 유체 크로마토그래피(Supercritical Fluid Chromatography, SFC)는 종래의 크로마토그래피 방법으로 분석하기 어려운 물질을 분석해 내는 기술로서 발전이 되어 왔다. 그러나 초임계 유체 $CO_2$는 극성이 큰 시료들을 용출(elution)시키기가 어려워 초임계 $CO_2$에 극성을 지닌 변형제(modifier)를 섞어서 이동상으로 사용하였다. 기존의 간단하고 효과적인 방법으로는 변형제로 포화된 Silica Column을 사용하였는데, 이 방법의 가장 큰 단점을 변형제의 양을 조절할 수 없다는 것이다. 따라서 본 연구에서는 초임계 $CO_2$에 변형제를 지속적으로 첨가시키며, 변형제의 양을 조절할 수 있는 새로운 방법을 개발하였고, 첨가된 수분($H_2O$)의 양은 perfluorosulfonate ionomer (PFSI) film을 이용하여 만든 amperometric microsensor로서 측정하였다. 실제로 이 방법을 사용하여 PAH 혼합물을 변형제 조성 프로그래밍법으로 분리해 본 결과 좋은 크로마토그램을 얻었다.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1025-1044
• /
• 2009

Systematic research has been conducted by KAERI to develop a supercritical carbon dioxide Brayton cycle energy conversion system coupled with a sodium cooled fast reactor. For the development of the supercritical $CO_2$ Brayton cycle ECS, KAERI researched four major fields, separately. For the system development, computer codes were developed to design and analyze the supercritical $CO_2$ Brayton cycle ECS coupled with the KALIMER-600. Computer codes were developed to design and analyze the performance of the major components such as the turbomachinery and the high compactness PCHE heat exchanger. Three dimensional flow analysis was conducted to evaluate their performance. A new configuration for a PCHE heat exchanger was developed by using flow analysis, which showed a very small pressure loss compared with a previous PCHE while maintaining its heat transfer rate. Transient characteristics for the supercritical $CO_2$ Brayton cycle coupled with KALIMER-600 were also analyzed using the developed computer codes. A Na-$CO_2$ pressure boundary failure accident was analyzed with a computer code that included a developed model for the Na-$CO_2$ chemical reaction phenomena. The MMS-LMR code was developed to analyze the system transient and control logic. On the basis of the code, the system behavior was analyzed when a turbine load was changed. This paper contains the current research overview of the supercritical $CO_2$ Brayton cycle coupled to the KALIMER-600 as an alternative energy conversion system.

• 한국식품저장유통학회지
• /
• 제17권2호
• /
• pp.256-260
• /
• 2010

초임계 이산화탄소를 건조 전처리 방법으로 사용하여 사과의 성분변화를 관찰하였다. 총 페놀 함량은 초임계 이산화탄소 온도와 압력이 증가 할수록 생과일과 무처리구 보다 낮은 함량을 나타내었다. Vitamin C, 유리당 및 유기산의 함량은 전처리 구간이 무처리구 보다 낮았고, 초임계 이산화탄소 압력과 온도 따라 큰 차이는 없었다. 이와 같은 결과는 초임계 이산화탄소의 용매적 특성이 핵산에 가까워 극성물질에 대한 용해력이 높지 않은 상태에서 고압으로 인해 압착되고 고압을 제거할 때 식품성분들이 이산화탄소와 동반해 유리되기 때문인 것으로 생각된다.

• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.83-90
• /
• 2006

Supercritical carbon dioxide ($scCO_2$) has advantages of being incorporated in polymer with high solubility and of being recovered easily by depressurizing. $scCO_2$ reduces the viscosity of polymer melt and it is expected to be use as a plasticizing agent. In this work, we studied on the effect of $scCO_2$ on the rheological properties of polymer melts during extrusion process. Slit die attached to twin screw extruder was used to measure the viscosity of polymer melts plasticized by supercritical $CO_2$. A gas injection system was devised to accurately meter the supercritical $CO_2$ into the extruder barrel. Measurements of pressure drop within the die, confirmed the presence of a one phase mixture and a fully developed flow during the measurements. The viscosity measurement of polypropylene was performed at experimental conditions of various temperatures, pressures and $CO_2$ concentrations. We observed that melt viscosity of polymer was dramatically reduced by $CO_2$ addition.

• Preventive Nutrition and Food Science
• /
• 제16권3호
• /
• pp.261-266
• /
• 2011

Supercritical $CO_2$ pretreatment before dehydration leads to a faster dehydration rate. The best supercritical $CO_2$ pretreatment conditions for the most effective dehydration were $45^{\circ}C$, 25 MPa and $55^{\circ}C$, 25 MPa. Increasing pressure of the supercritical $CO_2$ pretreatment system tended to accelerate the dehydration rate more than increasing temperature did. Samples pretreated at higher temperatures and pressures showed greater shrinking and pore distribution on scanning electron microscopy. Control samples maintained their cell walls, whereas samples pretreated at higher temperatures and pressures showed more cell disruption, and more pores were observed. Pore sizes of control and pretreated samples were about 100 and $70{\sim}80\;{\mu}m$, respectively. Samples pretreated at higher temperatures and pressures had smaller pores and a denser distribution.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.27-28
• /
• 2022

In this study, the mechanical properties of resource-recycling concrete containing concrete sludge waste as main materials was compared depending on whether supercritical CO2 curing was applied for the realization of CCU technology. After supercritical CO2 curing, the compressive strength of the steam-cured specimen was lowered, but it was confirmed that the compressive strength of the underwater-cured specimen was improved.

• Korean Chemical Engineering Research
• /
• 제45권4호
• /
• pp.384-390
• /
• 2007

본 연구는 $CO_2$ 초임계 유체를 도금액과 혼합하여 PET 필름 위에 무전해 구리도금을 실시하였으며 초임계 유체의 혼용조건에 따른 그 도금 효과를 비교하였다. 이산화탄소 초임계 유체와 도금액의 부피비는 1:9가 최적이였으며 초임계 유체가 10 vol% 이상이 되면 혼합액의 분산성이 불량해져 층분리가 발생하였다. 구리 무전해도금은 $25^{\circ}C$, 15 MPa 에서 수행된 구리막의 표면물성이 가장 균일하였다. 무전해 구리도금에서 도금액과 혼합시킨 초임계 유체의 역할은 단순히 용해도를 높여 주는 것이 아니라 도금막을 구성하는 구리입자를 1차 입자상태로 분산, 유지시킴을 확인하였다.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.80-88
• /
• 2020

Supercritical fluid dyeing is a new alternative to the conventional aqueous process because of its environmental benefits. In this study, dyeing properties of Nylon 6 fabrics were investigated depending on dyeing temperature and pressure in supercritical CO₂ fluid dyeing system. In order to select the optimal condition for supercritical fluid dyeing of Nylon 6 fabrics, dyeing temperature and pressure were varied from 100, 110, 120℃, 200, 230, 260bar, respectively. The results of K/S values and levelling properties showed that the optimal dyeing condition for Nylon 6 fabrics was 110℃ and 230bar in the supercritical CO₂ fluid dyeing system. The washing fastness ratings of the dyed Nylon 6 fabrics under supercritical medium were good for both fading and staining except for staining on nylon.

• KSBB Journal
• /
• 제20권5호
• /
• pp.329-337
• /
• 2005

Because of their unique properties, supercritical fluids have been known as one of the most promising materials for the future technology. Supercritical fluid technologies have been widely applied to various operations such as extraction, impregnation, nano-particle generation, oxidation, reaction etc. Industrial applications, especially their successful usage of supercritical fluid, have been reviewed. A special case for the first successful industrial application of supercritical $CO_2$ extraction in Korea was reviewed. Its unique characteristics of enriched antioxidant, $'\grmma-tocopherol'$ enabled this industrial application in Korea in spite of its low market price. Also its size and operation conditions were known as world records.