• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.616-619
• /
• 2007

Recently, flood damage has been increased annually by severe rain storm and Typhoon. In this case, it needs to the effective flood management using not only hydrologic data but also numerical map, DEM(Digital Elevation Model), satellite image and so on. At this point in time, therefore, applying mobile GIS technology is expected to increase efficiency about the management of hydraulic structures and can promote LBS(Location Based Service) service for residents. In this study, the flood management technology using mobile GIS is suggested by standing on the basis of a super-highway information network.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.614-622
• /
• 2010

The goal of this paper is to develope the control program based on model which can be applied to 1000MW class coal fired thermal power plant. 1000MW class power plant has the higher efficiency and lower cost because the steam conditions of the ultra super-critical process are higher than them of the previous power plants in temperature and pressure. The program includes the state variable controls which have the desired characteristics for the higher temperature and pressure. The program had been developed successfully using advanced process control. The simulation results using the new control program showed the better performance and safer control than them of the previous control program and we could verify the application possibility of the new program for the actual power plant through the load test, comparison, analysis and tuning.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.985-996
• /
• 2018

The implementation and performance evaluation of an interleaved boundary conduction mode (BCM) boost power factor correction (PFC) converter is presented in this paper by employing three wide band-gap switching devices: a super junction silicon (Si) MOSFET, a silicon carbide (SiC) MOSFET and a gallium nitride (GaN) high electron mobility transistor (HEMT). The practical considerations for adopting wide band-gap switching devices to BCM boost PFC converters are also addressed. These considerations include the gate drive circuit design and the PCB layout technique for the reliable and efficient operation of a GaN HEMT. In this paper it will be shown that the GaN HEMT exhibits the superior switching characteristics and pronounces its merits at high-frequency operations. The efficiency improvement with the GaN HEMT and its application potentials for high power density/low profile BCM boost PFC converters are demonstrated.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.60-65
• /
• 2000

An aerodynamic design method has been developed by using a three-dimensional unstructured Euler code and an adjoint code with a discrete approach. The resulting adjoint code is applied to a wing design problem of super-sonic transport with a wing-body-nacelle configuration. Hicks-Henne shape functions are adopted far the surface geometry perturbation, and the elliptic equation method is employed fer the interior grid modification during the design process. Interior grid sensitivities are neglected except those for design parameters associated with nacelle translation. The Sequential Quadratic Programming method is used to minimize the drag with constraints on the lift and airfoil thickness. Successful design results confirm validity and efficiency of the present design method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.68-74
• /
• 2016

Nanofibrillated cellulose (NFC) was prepared from cotton linter after electron beam irradiation to investigate its effects on the manufacturing efficiency of the NFC preparation and the property changes by the treatment. Mechanical device (Super Masscolloider) was used to prepare the NFC and its passing frequency for each NFC preparation was recorded. More electron beam irradiation resulted in less passing frequency. Alpha cellulose content, molecular weight, crystallinity index, and thermal decomposition behavior of each treatment were lowered by electron beam treatment (10 and 100 kGy) and grinding process. NFC films were prepared to investigate their mechanical properties. There were little changes in tensile properties of the NFC films.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.855-868
• /
• 1996

In this paper, multiplhase only filter(MPOFs) are designed using simulated annealing algorithm. These filters have excellent recognition characteristics for similar patterns or rotated patterns and enhance optical efficiency as well as spatial-bandwidth product by deleting mirror image. As the result of computer simulation to certify recogntion characteristics of similar patterns, simulated annealing-MPOF(SA-MPOF) has superior discrimination and higher correlation peak values than cosine binary phase only filters(CBPOF) and simpulated annealing-BPOF (SA-BPOF). THe filter having training process for rotated patterns of arbitraty possible angle can overcome that phase only filter(POF) and CBPOF can't recognize rotated input patterns.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.284-286
• /
• 1989

This paper describes the synthesis method of polyaniline and the characteristics of polyaniline/Zn and polyaniline/Li secondary batteries. Polyaniline was synthesized chemical or electrochemical method and then used as cathod active materials to investigate the characteristics of polyaniline/Zn and polyaniline/Li secondary batteries. Characteristics of polyaniline/Zn battery was affected by additives such as graphite powder and carbon black. Internal resistance, energy density and energy efficiency of polyaniline/Li secondary battery were $167{\Omega}$, 140.7 Wh/kg and 95.6%, respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.110-112
• /
• 2017

본 논문에서는 최신의 비디오 코덱 표준인 HEVC(High Efficiency Video Coding)의 화면 내 예측 부호화의 성능 향상을 위하여 SRCNN(Super Resolution Convolutional Neural Networks)을 이용하는 방법을 제안한다. SRCNN 은 비교적 최신 기술인 CNN(Convolutional Neural Network)을 사용하여 이미지를 추가적인 데이터 없이 보간 하여 해상도를 증가시키는 기술이다. HEVC 에서는 화면 내 예측의 잔차신호를 부호화 하기 위해 많은 비트를 소모하는데, 본 논문에서는 이 잔차신호들의 해상도를 낮추어 부호화 되는 비트를 줄이며, 복호화기에서 SRCNN 을 이용하여 원래의 해상도로 복원을 수행하여 압축성능을 향상 시키는 방법에 대하여 제안한다. 제안하는 기술은 HM 16.6 에 구현하였으며, CNN 트레이닝에 Caffe 라이브러리를 사용하였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.139-142
• /
• 1999

Screw rotors are core parts of screw type air compressors, compressors in refrigerating machines and super chargers of automobiles etc. They are composed of a female and a male rotors which have complex section profiles and helically swept geometry. Screw type compressors have advantages of low noise, high efficiency, less needs in maintenance etc. Usually, machining process of screw rotors requires long machining time using CNC machine designed only for screw rotors, which increase the cost of production. In this work, the screw rotors for air-compressors were manufactured with fiber reinforced epoxy composite materials by resin transfer molding process. The mold for the RTM process was made of aluminum and silicon rubber and was designed for release of helical shape products. Composite screw rotors, manufactured by RTM process, have advantages of lightweight, less cost of production, good characteristics of vibration etc.

• Korean Journal of Mathematics
• /
• v.23 no.1
• /
• pp.205-230
• /
• 2015

A class of periodic type boundary value problems of coupled impulsive fractional differential equations are proposed. Sufficient conditions are given for the existence of solutions of these problems. We allow the nonlinearities p(t)f(t, x, y) and q(t)g(t, x, y) in fractional differential equations to be singular at t = 0, 1 and be involved a sup-multiplicative-like function. So both f and g may be super-linear and sub-linear. The analysis relies on a well known fixed point theorem. An example is given to illustrate the efficiency of the theorems.