• Knee surgery & related research
• /
• v.30 no.4
• /
• pp.303-310
• /
• 2018

Purpose: The purpose of this study was to investigate whether surgical experience could improve surgical competency in medial open wedge high tibial osteotomy (MOWHTO). Materials and Methods: One hundred consecutive cases of MOWHTO were performed with preoperative planning using the Miniaci method. Surgical errors were defined as under- or overcorrection, excessive posterior slope change, or the presence of a lateral hinge fracture. Each of these treatment failures was separately evaluated using the cumulative summation test for learning curve (LC-CUSUM). Results: The LC-CUSUM showed competency in prevention of undercorrection, excessive posterior slope change, and lateral hinge fracture after 27, 47, and 42 procedures, respectively. However, the LC-CUSUM did not signal achievement of competency in prevention of overcorrection after 100 procedures. Furthermore, the failure rate for overcorrection showed an increasing tendency as surgical experience increased. Conclusions: Surgical experience may improve the surgeon's competency in prevention of undercorrection, excessive posterior slope change, and lateral hinge fracture. However, it may not help reduce the incidence of overcorrection even after performance of 100 cases of MOWHTO over a period of 6 years.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.365-371
• /
• 2019

This study shows the feasibility of the parameter of the 1st RC parallel equivalent circuit as a factor of the heat generation of lithium-ion cell. The internal resistance of a lithium-ion cell consists of ohmic and polarization resistances. The internal resistances at various SOCs of the lithium-ion cell are obtained via an electrical characteristic test. The internal resistance is inversely obtained through the amount of heat generated during the experiment. By comparing the resistances obtained using the two methods, the summation of ohmic and polarization resistances is identified as the heating factor of lithium-ion battery. Finally, the amounts of heat generated from the 2C, 3C, and 4C-rate discharge experiments and the COMSOL multiphysics simulation using the summation of ohmic and polarization resistances as the heating parameter are compared. The comparison shows the feasibility of the electrical parameters of the 1st RC parallel equivalent circuit as the heating factor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.13-20
• /
• 2021

In this paper, a new algorithm is proposed to estimate the damage size by combining the reflected area with the reflected position and extracting contours in proportion to the maximum value of pixels from the visible image. The cumulative summation feature vector algorithm is used to obtain the area of the reflected signal. To get the position of the reflected signal, the signal correlation algorithm is used to decompose the reflected signal from the damage. The proposed algorithm is tested and validated for composite panels. Repetitive experiments are performed and it is confirm that the proposed algorithm is reproducible. Further, it is verified that the damage size can be estimated appropriately by the proposed algorithm.

• PNF and Movement
• /
• v.20 no.3
• /
• pp.383-390
• /
• 2022

Purpose: The purpose of this study was to examine the effect of three-week contract-and-relax (CR) interventions with and without reinforcement using temporal summation for flexibility and dynamic balance ability in young people with hamstring shortening. Methods: This study was conducted on 20 female college students with hamstring shortening. The participants were divided equally into two groups using stratified randomization: the CR group (CRG) and the CR with reinforcement group (CRRG). All interventions were applied three times a week for three weeks. The passive straight leg raise (PSLR) test and functional reaching test (FRT) were conducted on each participant before and after the three-week intervention. Results: In both groups, PSLR and FRT improved significantly after the three-week intervention compared to before intervention (p < 0.01). The amount of change in PSLR after the three-week intervention was significantly higher in CRRG than in CRG (p < 0.05). Conclusion: Three-week CR interventions with and without reinforcement were effective in improving PSLR and FRT. To improve hamstring shortening, CR intervention with reinforcement may be more useful than CR intervention without reinforcement.

• Geophysics and Geophysical Exploration
• /
• v.21 no.2
• /
• pp.112-124
• /
• 2018

Ocean-bottom seismic survey is a seismic acquisition technique which measures data by installing 4-component receiver on the sea floor. It can produce more improved data in quality than any other acquisition techniques. In the ocean-bottom seismic survey, however, the number of receivers is limited due to high cost. Since only a small number of receivers are used for acquisition, ocean-bottom seismic data may suffer from discontinuities of events over traces, which can result in spatial aliasing. In this paper, we implemented Kirchhoff migration using mirror-imaging algorithm to improve the quality of ocean-bottom seismic image. In order to implement the mirror imaging algorithm, the seismograms should be separated into up-going and down-going wavefields and the down-going wavefield should be used for migration. In this paper, we use the P-Z summation method to separate the wavefield. Numerical examples show that the migration results using mirror imaging algorithm have wider illumination than the conventional migration, especially in the shallow layers.

• Korean journal of applied entomology
• /
• v.35 no.2
• /
• pp.119-125
• /
• 1996

Temperature-dependent development study for overwintered eggs of Pseudococcus comstocki (Kuwana) wasconducted to develop a forecasting model for egg hatch date. Hatch times of overwintered eggs were comparedat five constant temperatures (10, 15, 20, 25, 27$^{\circ}$C) and different collection dates. A nonlinear, four-parameterdevelopmental model with high temperature inhibition accurately described (R2=0.9948) mean developmentalrates of all temperatures. Variation in developmental times was modeled(~~=0.972w9)it h a cumulative Weibullfunction. Least-squares linear regression (rate=O.O06358[Temp.]-0.07566)d escribed development in the linearregion (15-25$^{\circ}$C) of the development curve. The low development threshold temperature was estimated 11.9"Cand 154.14 degree-days were required for complete development. The linear degree-day model (thermal summation)and rate summation model (Wagner et al. 1985) were validated using field phenology data. In degreedaymodels, mean-minus-base method, sine wave method, and rectangle method were used in estimation of dailythermal units. Mean-minus-base method was 18 to 28d late, sine wave method was 11 to 14d late, rectanglemethod was 3 to 5d late, and rate summation model was 2 to 3d late in predicting 50% hatch of overwinteredeggs. hatch of overwintered eggs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.1-12
• /
• 2021

In this paper, a new algorithm is proposed to estimate the damage location in the composite panel by extracting the elastic wave signal reflected from the damaged area. The guided elastic wave is generated by a piezoelectric actuator and sensed by a piezoelectric sensor. The proposed algorithm adopts a diagnostic approach. It compares the non-damaged signal with the damaged signal, and extract damage information along with sensor network and lamb wave group velocity estimated by signal correlation. However, it is difficult to clearly distinguish the damage location due to the nonlinear properties of lamb wave and complex information composed of various signals. To overcome this difficulty, the cumulative summation feature vector algorithm(CSFV) and a visualization technique are newly proposed in this paper. CSFV algorithm finds the center position of the damage by converting the signals reflected from the damage to the area of distance at which signals reach, and visualization technique is applied that expresses feature vectors by multiplying damage indexes. Experiments are performed for a composite panel and comparative study with the existing algorithms is carried out. From the results, it is confirmed that the damage location can be detected by the proposed algorithm with more reliable accuracy.

• East Asian mathematical journal
• /
• v.17 no.1
• /
• pp.129-133
• /
• 2001

The aim of this research note is to derive the well known Kummer's second theorem by transforming the integrals which represent some generalized hypergeometric functions. This theorem can also be shown by combining two known Bailey's and Preece's identities for the product of generalized hypergeometric series.

• Honam Mathematical Journal
• /
• v.27 no.4
• /
• pp.603-608
• /
• 2005

In 1999 and 2003, Padmanabham established two results (one each) for Exton's triple hypergeometric series $X_8$. We aim at showing that Exton's later result can be derived from his former one.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2633-2636
• /
• 2003

This study focuses on the new hardware design of fast and low-complexity multiplier over GF(2$\^$m/). The proposed multiplier based on the irreducible all one polynomial (AOP) of degree m, to reduced the system's complexity. It composed of Cyclic Shift, Partial Product, and Modular Summation Blocks. Also it consists of (m＋1)$^2$2-input AND gates and m(m＋1) 2-input XOR gates. Out architecture is very regular, modular and therefore, well-suited for VLSI implementation.