• 한국해양공학회지
• /
• 제28권4호
• /
• pp.314-323
• /
• 2014

In this study, a gearbox and blade were modeled in the MASTA program, and the housing and carrier components were modeled using a finite element method. Using substructure synthesis, all the components were combined and used to establish a vibration model of a 2.5-MW wind turbine gearbox. In addition, the safety displacement factor was evaluated using an AGMA data sheet about bearing's outer race for the input shaft and output shaft. As a result, the bearing's outer race for the input shaft, and the radial and axial responses were satisfied by the $1^{st}$ and $2^{nd}$ planetary gears and the $3^{nd}$ helical gear transmission error(TE), respectively. However, the output shaft support bearing's outer race responses were not satisfied with the radial response by the $2^{nd}$ TE and axial response by the $3^{rd}$ TE. To reduce the vibration, tooth modification was needed. After profile tooth modification, at the outer race of the output shaft support bearing, the radial response was reduced by approximately $20{\mu}m$, and the axial response was reduced by approximately $6{\mu}m$.

• 한국재난정보학회 논문집
• /
• 제14권2호
• /
• pp.165-173
• /
• 2018

연구목적 : 유적지와 같은 지역은 과거 산으로 둘러 쌓인 구릉지 등에 분포할 경우 강우시 매립층에 분포하는 흙은 투수능력이 떨어져 물이 원활히 배수되지 못하고 표층부의 함수비가 증가하여 지반의 질퍽임 현상이 많이 나타나고 있다. 본 연구는 강우시 배수가 불량하여 유적지에 분포하는 문화재의 기초 뿐만 아니라 상부구조물에도 큰 영향이 예상되어 배수불량의 원인을 파악하고자 하였다. 연구방법 : 현장에서 각종 지반조사 및 현장투수시험 그리고 지하수 모니터링을 통해 그 상관성을 분석하여 매립층의 배수에 대한 불량 원인을 파악하였다. 연구결과 : 본 연구결과 배수불량 원인은 부지내 지하수위가 매우 얕은 심도에 형성되어 있으며, 지표부 및 매립층의 토질은 투수성이 불량한 상태로 강우시 지하로 지표수가 침투되기에는 매우 부적합한 수리지질학적 여건임을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.251-258
• /
• 2005

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings (HDB) in an HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Reynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigen value problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.444-450
• /
• 2010

본 연구에서는 전류 4단자 전위차법을 이용한 전기비저항을 측정하여 반복피로손상을 받은 구리와 구리합금의 미시적 열화를 평가하였다. 서로 매우 다른 적층결함 에너지를 갖는 구리(Cu)와 구리합금(Cu-35Zn)에 대해 반복피로손상을 가하고 이들 재료에서 발달한 전위구조와 전기비저항 간의 관계를 연구하고자 하였다. Cu는 전위셀 하부구조를 형성하였지만, Cu-35Zn 합금은 피로사이클에 따라서 전위밀도는 증가하고 평면배열의 전위구조를 형성하였다. 전기비저항은 두 재료 모두에서 피로변형 초기 단계에서 급격하게 증가하였다. 더욱이, 피로시험 후 구리는 약 7 % 그리고 구리 합금은 약 6.5 % 변하였다. 이러한 일관적인 결과들로부터, 반복적인 피로에 의해 발달한 전위 셀구조는 평면배열의 전위구조보다도 전기비저항에 매우 민감한 것으로 판단된다.

• 천문학회보
• /
• 제43권1호
• /
• pp.58.2-58.2
• /
• 2018

Fossil groups of galaxies have characteristic features of a dominant central elliptical galaxy (${\Delta}M_{12}$ > 2 in $0.5R_{vir}$) embedded in highly relaxed X-ray halo, which indicates dynamically stable and evolved systems. These are thought as a final stage of the evolution of galaxy groups in the hierarchical structure formation scenario. However, the formation and evolution of fossil clusters are still unclear due to lack of detailed studies. Therefore, we perform a kinematic research of a known fossil cluster Abell 2261 (A2261 hereafter) using spectroscopic data of 589 galaxies in the A2261 field. Even though A2261 is known as a fossil cluster, previous studies found several unusual features such as quite high X-ray entropy for a stable cluster, and an elongated shape, which are not expected in standard fossil clusters. Using the caustic method, we identify cluster member galaxies and discover a second bright galaxy (${\Delta}M_{12}=1.68$) at ${\sim}1.5R_{vir}$. The presence of such a bright galaxy can break the current fossil state of cluster in the near future. In addition, with two independent substructure finding methods, we confirm that the previously detected elongated galaxy distribution of the cluster is a real feature. These findings indicate that A2261 is not in a fully stable state, unlike the existing fossil definition diagnostic. We require a more stringent criterion for the fossil definition to represent a genuinely final stage of cluster evolution.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.572-578
• /
• 2003

The free vibration of a spinning flexible disk-spindle system supported by hydro dynamic bearings in a HDD is analyzed by FEM. The spinning flexible disk is described using Kirchhoff plate theory and von Karman non-linear strain, and its rigid body motion is also considered. It is discretized by annular sector element. The rotating spindle which includes the clamp, hub, permanent magnet and yoke, is modeled by Timoshenko beam including the gyroscopic effect. The flexible supporting structure with a complex shape which includes stator core, housing, base plate, sleeve and thrust pad is modeled by using a 4-node tetrahedron element with rotational degrees of freedom to satisfy the geometric compatibility. The dynamic coefficients of HDB are calculated from the HDB analysis program, which solves the perturbed Raynolds equation using FEM. Introducing the virtual nodes and the rigid link constraints defined in the center of HDB, beam elements of the shaft are connected to the solid elements of the sleeve and thrust pad through the spring and damper element. The global matrix equation obtained by assembling the finite element equations of each substructure is transformed to the state-space matrix-vector equation, and the associated eigenvalue problem is solved by using the restarted Arnoldi iteration method. The validity of this research is verified by comparing the numerical results of the natural frequencies with the experimental ones. Also the effect of supporting structures to the natural modes of the total HDD system is rigorously analyzed.

• 멤브레인
• /
• 제23권2호
• /
• pp.119-128
• /
• 2013

본 연구에서는 복합 중공사 막을 이용하여 가스 중 수분(water vapor)의 제거에 관한 연구를 수행하였다. 막 소재로는 PEI (Polyetherimide)를 사용하였고 건/습식 상전이 법을 이용하여 중공사 형태로 제조한 후, 표면에 PEBAX (Polyether block amides) 3533또는 PEBAX1657를 코팅하여 복합 중공사막을 제조하였다. 제조된 중공사 막에 대한 SEM 관찰을 통하여 외부 표면에 치밀한 선택층과 망상구조의 하부로 이루어진 비대칭 구조임을 확인하였다. 막의 수분 투과특성을 확인하기 위하여 수분활성도(Water activity), 온도와 압력 변화에 따른 수분과 $N_2$의 투과도를 측정하였다. PEBAX3533을 코팅한 복합중공사 막의 수분 투과도는 운전 조건에 따라 385.6~727.3 GPU, 수분/$N_2$ 선택도는 61.7~118.5의 값을 나타내었다. PEBAX1657 코팅의 경우, 수분 투과도는 204.1~562.1 GPU, 수분/$N_2$ 선택도는 85.3~175.4의 값을 나타내었다. 막의 수분제거율은 PEBAX3533 코팅한 경우에 90%를 나타내었다.

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.423-430
• /
• 2016

In this study, we investigated the corrosion damage characteristics of steel for offshore wind turbine tower substructure using an accelerated electrochemical test. The galvanostatic corrosion test method was employed with a conventional 3 electrode cell in natural sea water, and the steel specimen was served as a working electrode to induce corrosion in an accelerated manner. Surface and cross-sectional image of the damaged area were obtained by optical microscope and scanning electron microscope. The weight of the specimens was measured to determine the gravimetric change before and after corrosion test. The result revealed that the steel tended to suffer uniform corrosion rather than localized corrosion due to active dissolution reaction under the constant current regime. With increasing galvanostatic current density, the damage depth and surface roughness of surface was increased, showing approximately 25 times difference in damage depth between the lowest current density ($1mA/cm^2$) and the highest current density ($200mA/cm^2$). The gravimetric observation showed that the weight loss was proportionally increased with increment of current density that has 75 times different according by experimental conditions. Consequently, uniform corrosion of the steel specimen was conveniently induced by the electrochemically accelerated corrosion technique, and it was possible to control the extent of the corrosion damage by varying the current density.

• 구강회복응용과학지
• /
• 제32권3호
• /
• pp.246-254
• /
• 2016

Direct metal laser sintering (DMLS) 방식은 3D 프린팅 중 한 방식으로, 재료를 쌓아가면서 레이저를 이용하여 선택적으로 sintering하는 방식이다. 이는 주조 방식에서 문제되는 결손과 뒤틀림을 방지할 수 있으며 절삭 가공 방식으로 제작하기 어려운 복잡한 구조물을 제작할 수 있다. 본 증례들은 DMLS 방식을 이용하여 지대치 간 길이가 긴 고정성 보철물, 포스트 등 다양한 고정성 보철물을 제작하여 수복하였고, 주기적인 관찰 결과 심미적, 기능적으로 만족할만한 결과를 얻었기에 이를 보고하는 바이다.

• 한국보건간호학회지
• /
• 제26권1호
• /
• pp.5-15
• /
• 2012

Purpose: The effects of the organizational culture and health promotion life style on job satisfaction of nurses in general hospitals have been studied in an effort to provide basic information that will be helpful in effective management of the organization and enhancement of nursing. Method: The 341 samples used in the study were selected randomly from general hospitals having more than 250 beds in Gwangju province and Yosu province. Data collected were analyzed for frequency, percentage, ANOVA, t-test, Pearson's correlation analysis, and Multiple regression analysis using SPSS, a program package for statistical analysis. Result: Factors affecting job satisfaction included work years, position, monthly income, stress management, which is a substructure of health promotion life style, innovation-oriented culture, relation-oriented culture, and task-oriented culture in organizational culture. Results showed an influence of 64.2%. Ed - highlight: Please review. Conclusion: The organizational culture, such as an innovation-oriented culture, relation-oriented culture, or task-oriented culture, has a positive influence on job satisfaction.