• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.42-47
• /
• 2018

This work reports a facile and effective antibacterial coating for oxide substrates. As a coating material, a random copolymer, abbreviated as poly(TMSMA-r-PEGMA), was synthesized by radical polymerization of 3-(trimethoxysilyl)propyl methacrylate (TMSMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA). Polymeric self-assembled monolayers of poly(TMSMA-r-PEGMA) were formed on various inorganic oxide substrates, including silicon oxide, titanium dioxide, aluminum oxide, and glass, via the simple dip-coating process. The polymer-coated substrates were characterized by ellipsometry, contact angle measurements, and X-ray photoelectron spectroscopy. The bacterial adhesion on the polymer-coated substrates was completely suppressed compared to that on the uncoated substrates.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.608-613
• /
• 2010

Electricity generation of microbial fuel cells (MFC) is greatly affected by the kind of feed substrates because substrates would change microbial community of electrochemically active bacteria (EAB) able to transfer electrons to electrode. The effect of different substrates on electricity generation and microbial community of MFC was investigated. Two-chamber MFCs fed with acetate (A-MFC), butyrate (B-MFC), propionate (P-MFC), glucose (G-MFC) and a mixture (M-MFC) of the 4 substrates (acetate : butyrate : propionate : glucose = 1 : 1 : 1 : 1 as $COD_{Cr}$ base) were operated under continuous mode. The maximum power density was found from the M-MFC ($190W/m^3$) which showed the lowest internal resistance ($89{\Omega}$). The maximum power densities of the pure substrates feed MFCs were in order of A-MFC ($25W/m^3$), P-MFC ($21W/m^3$), B-MFC ($20W/m^3$) and G-MFC ($9W/m^3$). In DGGE analysis, the microbial community structure in suspension was quite different from each others depending on feed substrates, while the community structure in the biofilm was relatively similar regardless of the substrates. This result suggests that the feed substrates would affect the microbial community of suspended growth bacteria than attached growth bacteria resulting in difference of electricity generation in MFCs.

• 한국버섯학회지
• /
• 제10권4호
• /
• pp.236-243
• /
• 2012

버섯수확후배지는 버섯을 수확한 후 남겨진 배지를 말하며 버섯배지의 주원료는 가축 사료원료인 콘코브, 미강, 밀기울, 면실피, 비트펄프 등이고 버섯재배과정에서 배지영양원의 약 15-25% 정도만 버섯에 의해 이용되고 나머지 75-85% 정도는 버섯수확후배지에 남아있기 때문에 버섯수확후 배지는 사료자원으로써 활용가치가 매우 높은 농산부산물이다. 버섯수확후배지 중 사료자원으로 이용할 수 있는 것은 새송이, 팽이, 느타리버섯 수확후배지이며 새송이버섯 수확후배지는 난분해성 물질인 톱밥이 함유되어 있기 때문에 섬유소 함량은 높고 가소화양분 함량은 낮다는 단점이 있지만 cellulase와 xylanase 활성이 높은 미생물을 가축사료 첨가용 생균제로 이용하여 버섯수확후배지 발효사료를 제조하면 버섯수확후배지의 섬유소 함량은 낮아질 수 있다. 그러나 새송이버섯 수확후배지는 가소화양분 함량이 낮기 때문에 새송이버섯 수확후배지 발효사료를 단독으로 급여하기보다는 버섯수확후배지 발효사료를 일정량 첨가한 배합사료를 제조하여 급여하는 것이 영양학적인 측면에서 바람직하며 발효과정에 의해 기호성과 저장성이 개선된 새송이버섯 수확후배지 발효사료의 급여는 축우의 사료비 절감과 고급육 생산 효과를 기대할 수 있다.

• Journal of Neurogastroenterology and Motility
• /
• 제24권4호
• /
• pp.570-576
• /
• 2018

Background/Aims Swallows with viscous or solid boluses in different body positions alter esophageal manometry patterns. Limitations of previous studies include lack of standardized viscous substrates and the need for chewing prior to swallowing solid boluses. We hypothesize that high-resolution impedance manometry (HRiM) using standardized viscous and super-viscous swallows in supine and upright positions improves sensitivity for detecting esophageal motility abnormalities when compared with traditional saline swallows. To establish normative values for these novel substrates, we recruited healthy volunteers and performed HRiM. Methods Standardized viscous and super-viscous substrates were prepared using "Thick-It" food thickener and a rotational viscometer. All swallows were administered in 5-mL increments in both supine and upright positions. HRiM metrics and impedance (bolus transit) were calculated. We used a paired two-tailed t test to compare all metrics by position and substrate. Results The 5-g, 7-g, and 10-g substrates measured 5000, 36 200, and 64 $700mPa{\cdot}sec$, respectively. In 18 volunteers, we observed that the integrated relaxation pressure was lower when upright than when supine for all substrates (P < 0.01). The 10-g substrate significantly increased integrated relaxation pressure when compared to saline in the supine position (P < 0.01). Substrates and positions also affected distal contractile integral, distal latency, and impedance values. Conclusions We examined HRiM values using novel standardized viscous and super-viscous substrates in healthy subjects for both supine and upright positions. We found that viscosity and position affected HRiM Chicago metrics and have potential to increase the sensitivity of esophageal manometry.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.56-62
• /
• 2019

The high-precision laser scriber carries out scribing alumina ceramic substrates for manufacturing ultra-small chip resistors. The ceramic substrates are loaded, aligned, scribed, transferred, and unloaded. The entire process is fully automated, thereby minimizing the scribing cycle time of the ceramic substrates and improving the throughput. The scriber consists of the laser optical system, pick-up module of ceramic substrates, pre-alignment module, TH axis drive work table, automation module for substrate loading / unloading, and high-speed scribing control S/W. The loader / unloader unit, which has the greatest influence on the scribing cycle time of the substrates, carries the substrates to the work table that carries out the cutting line work by driving the X and Y axes as well as by adsorbing the ceramic substrates. The loader / unloader unit consists of the magazine up / down part, X-axis drive part for conveying the substrates to the left and right direction, and the vision part for detecting the edge of the substrate for the primary pre-alignment of the substrates. In this paper, the laser scribing machining simulation is performed by applying the instrument mechanism of each component module. Through this study, the scribing machining process is first verified by analyzing the process operation and work area of each module in advance. In addition, the scribing machining process is optimized by comparing and analyzing the scribing cycle time of one ceramic substrate according to the alignment stage module speed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권11호
• /
• pp.1560-1568
• /
• 2011

This study was conducted to evaluate the yield, nutrient characteristics, ruminal solubility, degradability and disappearance of spent mushroom (Agaricus bisporus) substrates for ruminants. The annual yield of spent Agaricus bisporus substrates was measured to be about 210,000 tons (M/T) in South Korea. The surface soil-removed spent substrates had nutritional characteristics of high crude ash (375 g/kg) and Ca (32 g/kg), medium protein (134 g/kg CP), and high fiber (384 g/kg NDF on a DM basis). Compared with initial mushroom substrates, spent mushroom substrates had twice higher (p<0.0001) CP content and 22.0% lower (p<0.0001) NDF content on an organic matter basis. Compared with raw rice straw, spent rice straw had much higher (p<0.05) predicted ruminal degradabilities and disappearances of DM and CP and a little lower (p<0.05) predicted degradability and disappearance of NDF. In conclusion, the general feed-nutritional value of spent mushroom (Agaricus bisporus) substrates appeared to improve after cultivation of mushrooms.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.187-188
• /
• 2007

Four kinds of mirror substrates with same surface roughness were fabricated. On those substrates, a dielectric multi-layer coating with high reflectivity was deposited by ion beam sputtering technique. Most of the fused silica mirrors showed lower scattering than the ZERODUR mirrors one, which deposited on substrates similar in surface roughness. The ZERODUR mirrors scattering strongly depend on the micro-structure of $Ta_2O_5/SiO_2$ thin films wear deposited on ZERODUR substrates.

• 한국균학회지
• /
• 제47권4호
• /
• pp.373-383
• /
• 2019

본 연구에서는 표고 톱밥재배의 배지 조성에 따른 생산성 및 버섯 특성에 대해 알아보기위해 총 10가지의 농업부산물을 영양원으로 사용하였다. 대두박과 면실박을 이용한 배지에서는 배양기간 동안 균사가 완전히 생장하지 않아서 재배에 이용할 수 없었다. NIFoS 2462 균주에서는 대두피, 면실피, 파옥쇄, 혼합배지에서는 밀기울보다 높은 생산량을 나타내었으며, NIFoS 2778에서는 밀기울의 생산량이 다른 영양원들보다 높게 나타났다. 대두피를 사용한 배지에서 발생한 버섯들은 다른 배지에서 발생된 버섯들보다 작은 크기의 버섯이 생산되었으며, 반대로 옥분을 이용한 배지에서는 다른 영양원을 사용한 배지보다 큰 버섯이 생산되었다. 이를 통해 배지에 첨가되는 영양원이 버섯의 특성에 영향을 주는 것으로 확인되었다. 영양원들의 기초 성분 조사 결과, 대두박과 면실박은 조단백질과 조회분의 비중이 높았다. 그리고 면실박에서는 총유기물 함량과 가용성무질소물의 양이 다른 영양원들에 비해 낮게 나타났다. 이러한 영양원들의 기초성분이 버섯 재배시 생산량 및 버섯의 특성에 영향을 준다고 여겨지며, 이와 같은 표고 재배에 대한 연구를 통하여 다양한 자원에 대한 활용 가능성을 넓히는 것이 중요하다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.223-223
• /
• 2012

Surface engineering plays a significant role in fabricating highly functionalized materials applicable to industrial and biomedical fields. Surface wrinkles and folds formed by ion beam or plasma treatment are buckling-induced patterns and controlled formation of those patterns has recently gained considerable attention as a way of creating well-defined surface topographies for a wide range of applications. Surface wrinkles and folds can be observed when a stiff thin layer attached to a compliant substrate undergoes compression and plasma treatment is one of the techniques that can form stiff thin layers on compliant polymeric substrates, such as poly (dimethylsiloxane) (PDMS). Here, we report two effective methods using plasma modification techniques for controlling the formation of surface wrinkles and folds on flat or patterned PDMS substrates. First, we show a method of creating wrinkled diamond-like carbon (DLC) film on grooved PDMS substrates. Grooved PDMS substrates fabricated by a molding method using a grooved master prepared by photolithography and a dry etching process were treated with argon plasma and subsequently coated with DLC film, which resulted in the formation of wrinkled DLC film aligning perpendicular to the steps of the pre-patterned ridges. The wavelength and the amplitude of the wrinkled DLC film exhibited variation in the submicron- to micron-scale range according to the duration of argon plasma pre-treatment. Second, we present a method for controlled formation of folds on flat PDMS substrates treated with oxygen plasma under large compressive strains. Flat PDMS substrates were strained uniaxially and then treated with oxygen plasma, resulting in the formation of surface wrinkles at smaller strain levels, which evolved into surface folds at larger strain levels. Our results demonstrate that we can control the formation and evolution of surface folds simply by controlling the pre-strain applied to the substrates and/or the duration of oxygen plasma treatment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.973-974
• /
• 2004

We report the fabrication of flexible plastic ITO substrates and the measurement of oxidant permeation through the substrates. The plastic ITO substrates are composed of multiple organic and inorganic thin films. The organic thin films are deposited by vapor polymerization and the inorganic films are deposited by ion beam sputtering. In order to estimate the oxidant permeation rate, the pure Ca film is formed on the substrates and the amount of CaO produced by the oxidation of Ca is measured.