• 제목/요약/키워드: Substrates

검색결과 6,515건 처리시간 0.031초

하천 미지형 및 하상저질에 따른 갯버들과 달뿌리풀군락의 분포특성에 관한 연구 (A Study on the Distribution Patterns of Salix gracilistyla and Phragmites japonica Communities according to Micro-landforms and Substrates of the Stream Corridor)

  • 전승훈;현진이;최정권
    • 한국조경학회지
    • /
    • 제27권2호
    • /
    • pp.58-68
    • /
    • 1999
  • This study was carried out to verify the distribution patterns of Salix gracilistyla and Phragmites japonica communities known as obligatory riparian species according to physical factors such as micro-landforms, substrates, etc., at Soo-ip stream corridor. Firstly four vegetation types - Salix gracilistyla dominant type, Phragmites japonica dominant type, mixed type of two species, and mixed type of two species to other species, were classified by cluster analysis based on UPGMA-Euclidean distance. Also these vegetation types showed many different distribution patterns in response to the longitudinal and lateral view along the stream corridor and substrate composition. Salix gracilistyla was major component of dominant vegetation types developed at attack point of bending reach and on substrates composed of rock fragments, but contrastly Phragmites japonica was most important component of dominant vegetation types at point bar of bending reach and floodplain, and on substrates composed of soil materials. Secondly the species and environment biplot form CCA strongly supported the vegetation types divided by classification. Namely Salix gracilistyla was closely correlated with rock fragments and steep slope, which is resistant to physical action even though located near running water. But Phragmites japonica showed a high correlation with soil particles sedimented at floodplain by divergent flow.

  • PDF

Miscut된 기판을 이용할 산화물 박막의 에피 성장 (Epitaxial growth of oxide films using miscut substrates)

  • 부상돈
    • 한국진공학회지
    • /
    • 제13권4호
    • /
    • pp.145-149
    • /
    • 2004
  • RF magnetron sputtering 방법으로 miscut된 기판을 이용해서 양질의 압전 산화물 에피 박막을 제작하였다. 박막은 (001) $SrTiO_3$ 기판 위에 증착되었으며, (100) 방향으로 $0^{\circ}$-$8^{\circ}$의 miscut 각도를 갖는 기판들을 사용했다. $4^{\circ}$이상의 큰 miscut 각도를 갖는 기판 위에 성장된 박막의 경우, x-ray diffraction (XRD) 패턴은 perovskite 상의 순수한 PMN-PT 피크만을 보여 주었으며, wavelength dispersive x-ray fluorescence spectroscopy를 이용해서 분석한 조성비는 stoichiometric한 조성비에 가까운 값을 보여주었다. 반면에, miscut 각도가 없는 기판 위에 증착된 박막의 경우, 2차상인 pyrochlore 상을 포함하는 XRD 패턴을 보여주었다. $8^{\circ}$ 기판 위에 성장된 박막의 경우 실온에서 20$\mu$C/$\textrm{cm}^2$라는 높은 잔류분극 값을 보여주었다

RF 스퍼터링용 Hydroxyapatite 타겟의 제조 및 Hydroxyapatite/Ti-6Al-4V 합금 박막의 특성(I) (The Fabrication of Hydroxyapatite Targets and the Characteristics of Hydroxyapatite/Ti-6Al-4V Alloy Thin Films by RF Sputtering(I))

  • 정찬회;김명한
    • 한국재료학회지
    • /
    • 제13권4호
    • /
    • pp.205-212
    • /
    • 2003
  • RF sputtering process was applied to produce thin hydroxyapatite[HA, Ca10($PO_4$)$_{6}$ $ (OH)_2$films on Ti-6Al-4V alloy substrates. To make a 101.6 mm dia.${\times}$5 mm HA target, the commercial HA powder was first calcinated for 3h at $200^{\circ}C$. A certain amount of the calcinated HA powder was pressed under a pressure of 20,000 psi by the cold isostatic press(CIP) and the pressed HA target was sintered for 6 h at $1,200^{\circ}C$. The effects of different heat treating conditions on the bonding strength between HA thin films and Ti-6Al-4V alloy substrates were studied. Before deposition, the alloy substrates were annealed for 1 h at $850^{\circ}C$ under $3.0${\times}$10^{-3}$ Xtorr, and after deposition, the hydroxyapatite/Ti-6Al-4V alloy thin films were annealed for 1 h at 400, 600 and $800^{\circ}C$ under the atmosphere, respectively. Experimental results represented that the HA thin films on the annealed substrates had higher hardness than non-heat treated substrates before the deposition.

As과 Ga 빔 조사에 의해 세척된 Si(100) 기판 위에 GaAs 에피층 성장과 RHEED 패턴 (GaAs Epilayer Growth on Si(100) Substrates Cleaned by As/Ga Beam and Its RHEED Patterns)

  • 임광국;김민수;임재영
    • 한국표면공학회지
    • /
    • 제43권4호
    • /
    • pp.170-175
    • /
    • 2010
  • The GaAs epitaxial layers were grown on Si(100) substrates by molecular beam epitaxy(MBE) using the two-step method. The Si(100) substrates were cleaned with different surface cleaning method of vacuum heating, As-beam, and Ga-beam at the substrate temperature of $800^{\circ}C$. Growth temperature and thickness of the GaAs epitaxial layer were $800^{\circ}C$ and 1 ${\mu}m$, respectively. The surface structure and epitaxial growth were observed by reflection high-energy electron diffraction(RHEED) and scanning electron microscope(SEM). Just surface structure of the Si(100) substrate cleaned by Ga-beam at $800^{\circ}C$ shows double domain ($2{\times}1$). RHEED patterns of the GaAs epitaxial layers grown on Si(100) substrates with cleaning method of vacuum heating, As-beam, and Ga-beam show spot-like, ($2{\times}4$) with spot, and clear ($2{\times}4$). From SEM, it is found that the GaAs epitaxial layers grown on Si(100) substrates with Ga-beam cleaning has a high quality.

Effect of Gold Substrates on the Raman Spectra of Graphene

  • Kim, Na-Young;Oh, Min-Kyung;Park, Sung-Ho;Kim, Seong-Kyu;Hong, Byung-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권4호
    • /
    • pp.999-1003
    • /
    • 2010
  • Raman spectra of a single layer graphene sheet placed in different gold substrates were obtained and are discussed in the context of surface enhanced Raman scattering (SERS). The gold substrates were composed of a combination of a thermally deposited gold film and a close-packed gold nanosphere layer. The SERS effects were negligible when the excitation wavelength was 514 nm, while the Raman signals were enhanced 3-to 50-fold when the excitation wavelength was 633 nm. The large SERS enhancement accompanied a spectral distortion with appearance of several unidentifiable peaks, as well as enhancement of a broadened D peak. These phenomena are interpreted as the local field enhancement in the nanostructure of the gold substrates. The difference in the enhancement factors among the various gold substrates is explained with a model in which the spatial distribution and polarization of the local field and the orientation of the inserted graphene sheet are considered important.

새로운 합성 펩티드에 대한 펩신 작용 1. Benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine 과 그의 에틸에스테르에 대한 펩신 작용 (Pepsin Action on the New Synthetic Peptides 1. Pepsin action on benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine and its ethyl ester)

  • 윤주억;신홍대
    • 대한화학회지
    • /
    • 제13권3호
    • /
    • pp.233-240
    • /
    • 1969
  • The synthesis is described of new pepsin substrates of benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine ethyl ester and benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine for studies on the specificity of pepsin, and thin layer chromatographic examination of the peptides prepared showed the new substrates are homogeneous and also, same examination of the incubation mixtures showed that two synthetic substrates are cleaved by pepsin at the L-tyrosyl-L-phenylalanyl bond and hydrolysis of these substrates by pepsin is achieved without transpeptidation. It is found that synthetic peptides are moderately soluble with the amount of the substrate up to a concentration of 0.7 mM in aqueous sodium citrate buffers (0.04 M) in the pH range 1.8-4.0, thus obviating the necessity for the adding of an organic solvent in the assay mixture. The kinetic parameters for synthetic substrates are tabulated in the following table. The data in the table indicate that the susceptibility of synthetic peptides to peptic hydrolysis are relatively large and the change of the carboxyl-terminal group of synthetic substrate from glycine ethyl ester to glycine causes a small decrease in the susceptibility of the L-tyrosyl-L-phenylalanyl bond.

  • PDF

Sputter Seeding을 이용한 CVD Cu 박막의 비선택적 증착 및 기판의 영향 (The Blanket Deposition and the Sputter Seeding Effects on Substrates of the Chemically Vapor Deposited Cu Films)

  • 박종만;김석;최두진;고대홍
    • 한국세라믹학회지
    • /
    • 제35권8호
    • /
    • pp.827-835
    • /
    • 1998
  • Blanket Copper films were chemically vapor deposited on six kinds for substrates for scrutinizing the change of characteristics induced by the difference of substrates and seeding layers. Both TiN/Si and {{{{ { SiO}_{2 } }}/Si wafers were used as-recevied and with the Cu-seeding layers of 40${\AA}$ and 160${\AA}$ which were produced by sputtering The CVD processes were exectued at the deposition temperatures between 130$^{\circ}C$ and 260$^{\circ}C$ us-ing (hfc)Cu(VTMS) as a precursor. The deposition rate of 40$^{\circ}C$ Cu-seeded substrates was higher than that of other substrates and especially in seeded {{{{ { SiO}_{2 } }}/Si substrate because of the incubation period reducing in-duced by seeding layer at the same deposition time and temperature. The resistivity of 160${\AA}$ Cu seeded substrate was lower then that of 40 ${\AA}$ because the nucleation and growth behavior in Cu-island is different from the behavior in {{{{ { SiO}_{2 } }} substrate due to the dielectricity of {{{{ { SiO}_{2 } }}.

  • PDF

중적외선 영역의 무반사 코팅된 ZnS 기판의 설계와 광학 특성 (Design and Analysis of Optical Properties of Anti-reflection Coated ZnS Substrates in the Mid-infrared Region)

  • 박범근;백종후
    • 센서학회지
    • /
    • 제31권4호
    • /
    • pp.255-259
    • /
    • 2022
  • In this study, we fabricated ZnS substrates with excellent transmittance in the mid-infrared region (3-5 ㎛) using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon (DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance efficiency. To reduce the reflectance and further improve transmittance in the mid-infrared region, anti-reflection (AR) coating was designed for DLC/ZnS /AR and AR/ ZnS /AR structures. The coating structure, microstructure, and optical properties of the AR-coated ZnS substrates were subsequently investigated by employing energy dispersive X-ray spectroscopy, scanning electron microscopy, and Fourier-transform infrared (FTIR) spectroscopy. The FTIR spectroscopy results demonstrated that, in the mid-infrared region, the average transmittance of the samples with AR coating on one and both sides increased by approximately 18% and 27%, respectively. Thus, AR coating improved the transmittance of the ZnS substrates.

환경조건이 표고톱밥배지의 갈변에 미치는 영향 (The effect of environmental condition to the mycelial browning of Lentinula edodes (Berkeley) Sing. during sawdust bag cultivation)

  • 김영호;전창성;박수철;유창현;성재모;공원식
    • 한국버섯학회지
    • /
    • 제7권3호
    • /
    • pp.115-121
    • /
    • 2009
  • 표고 톱밥배지의 갈변을 촉진시키기 위하여 광을 조사한 결과 100Lux 이상의 광처리에서 원하는 수량을 얻을 수 있었으며 암상태에서의 자실체의 발생은 기형버섯율이 높았으며 수량도 저조하였다. 그러나 갈변은 200 Lux이상의 광에서 정상적으로 이루어졌으며 가장 빨리 갈변이 되기 시작하였다. 온도별 처리에서는 $25^{\circ}C$의 배양온도를 유지하여 배양한 것이 갈변시작일도 가장 빨랐고 갈변도 가장 많이 진행되었으며 수량과 개체중량도 가장 높았으며 정상적인 수량을 나타낸 처리 중 기형버섯의 발생량도 가장 적었다. 배지내에 통기성이 미치는 영향을 조사하기 위하여 솜마개의 크기를 달리하여 처리한 결과 마개의 크기가 클수록 균사의 생장량도 빨랐으며 갈변이 이루어지는 시기도 빨랐다. 그러나 자실체의 수량은 솜마개의 직경이 16mm일 때 가장 높았으며 마개가 클수록 배지내의 $CO_2$함량은 낮았으며 배양기간 중 갈변이 진행되는 8주에서 14주 사이에서 $CO_2$함량이 가장 높았다. 배양기간 중 $C_2H_4$함량은 8mm의 솜마개에서 가장 많이 발생하였으며 12, 16, 20, 0, 4mm의 솜마개으로 발생하였다. $C_2H_4$함량도 $CO_2$함량과 같이 8주에서 14주사이의 배양기간에서 가장 높았다. 침수시간에 따른 자실체의 발생효과를 구명하기 위하여 침수시간별로 자실체의 수량과 효소들의 활성을 조사하였다. 침수를 하지 않은 배지는 수량이 침수를 한 배지에 비하여 약 40%가 감소하였다. 침수시간은 4시간과 15시간 침수한 것이 각각 165g/1000ml, 175g/1000ml 이었다. 침수시 cellulose분해효소는 침수에 따른 변화가 없으나 lignin 분해효소인 laccase는 침수시간에 따라 약 4 배정도까지 효소의 활력이 증가되었다.

  • PDF

Barix Thin Film Encapsulation of OLED's on Flexible and Rigid Glass substrates; high temperature performance and manufacturing aspects.

  • Chu, X.;Moro, L.;Rutherford, N.;Visser, R.J.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1699-1702
    • /
    • 2007
  • We will discuss encapsulation of OLEDs on both flexible and rigid glass substrates. Accelerated testing at 6CC/90RH and 85C/85RH is compared and acceleration factors for OLED and Calcium test samples are discussed.We have tested the stability and performance of our barrier coating to much higher temperatures: up to 140 C. Water Vapor Transmission rates at temperatures from 60 to 140 C are presented. Rates and methods for low cost manufacturing on a large scale are analysed

  • PDF