• Journal of environmental and Sanitary engineering
• /
• v.21 no.4 s.62
• /
• pp.49-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 2%, 4% and 8%-crosslinking and 1-aza-18-crown-6 macrocyclic ligand by copolymerization method. Content of chlorine in styrene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased 1%, 2%, 4% and 8% DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-18-C-6 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Thermo analysis curve of functional synthetic resin decomposed three part of 1-aza-18-C-6, styrene, and DVB. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.307-312
• /
• 2002

Among the various zero suppression (ZS) algorithms used in a for synchronous stream cipher system, a ZS-2 exhibits certain good properties, including the omission of the block synchronization, easy implementation, etc., yet also a weakness in channel error propagation. Accordingly, This paper proposes a new method by minimizing the bit-wide substitution in the substitution blocks of ZS-2 to improve the degenerated error property in a noisy channel. As a result, the proposed ZS-3 algorithm can decrease the mean error propagation by about 18.7% over that of ZS-2 at n=8.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.160-164
• /
• 2015

In this study, $(1-x)Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3+xCeMnO_3$ (x= 0~0.02) ceramics were prepared by Columbite precursor method. The phase structure, ferroelectric and piezoelectric properties were systematically investigated. It was found that PMW-PNN-PZT possessed superior electrical properties due to its composition close to the MPB (morphotropic phase boundary). Coercive electric field of 10.05 [kV/cm] and density of 7.88 [$g/cm^3$] were obtained when the substitution amount of $CeMnO_3$ is x=0.02. In contrast, specimens with x=0.01 showed the mechanical quality factor($Q_m$) of 1,091 and the electromechanical coupling factor($k_p$) of 0.613.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.45-60
• /
• 2010

Nonlinear problems for membrane structures are very sensitive in convergence procedure in nonlinear iterations. Therefore many researchers have suggested a lot of ideas in published papers. In this study, authors are trying to get easier solution for taking membrane shape by initial stresses from substitution of the membrane to line elements. To obtain nonlinear stiffness, the nonlinear finite element method is used for both membrane and cable elements, and only geometric nonlinear terms are taken for shape analysis. By some examined models, we can find that the substituted models show better results to get, initial shape in which the concentrating phenomenon is removed at edge parts.

• 한국전기화학회:학술대회논문집
• /
• 2002.11a
• /
• pp.57-65
• /
• 2002

The presence of tetragonal phase at the surface of $LiMn_2O_4$ pinicle due to a Jahn-Teller offset was previously reported to be one of the causes for capacity fading observed during cycling of $Li//Li_xMn_2O_4$ in 4V range. Further, it is reported that a Jahn-Teller effect in 4V range may be suppressed by substitution of Mn ions with Li ions or other transition metal ions. However, the direct evidence of the suppression of a Jahn-Teller effect in 4V range by substitution of Mn ions with other metal ions has not been reported. The dissolution and formation of surface film at the surface of $LiMn_2O_4$ electrodes also reportedly affect the capacity fading or rate capability. This study reports on the evidence of the onset and suppression of a Jahn-Teller effect in 4V range and the dissolution and formation of surface film at the surface of $LiMn_2O_4$ thin film electrodes using in situ bending beam method (BBM) in situ electrochemical quartz crystal microbalance (EQCM).

• Archives of Pharmacal Research
• /
• v.17 no.3
• /
• pp.139-144
• /
• 1994

A series of 6-(N-aylamono)-7-chloro-5, 8-quinolinedione derivatives was newly synthesized for the evaluation of antifugal activities. 5-Amino-8-hydroxy-quinoline (II) was treated with $KCLO_3$ in HCl to give 6,7-dichloro-5,8-quinolinediones (III). 6-(N-Arylamino)-7-chloro5,8-quinolinediones 1-13 were prepared by regioselective nucleophilic substitution of III with arylamines. In the presence of $CeCl_3$, the N-arylamono groups were introduced at the 6-position of 5,8-quinolinedione ring by the regioselective substitution. These derivatives 1-12 were tested for natifungal and also antibacterial activites, in vitro, against Canadida albicans, Aspergillus nier, Tricophyton mentagrophytes, Bacillus subtilis, Pseudomonas aeruginosa, Staphylococcus aureus and Escherichia coil. The MIC values were determined by the two-fold agar/steak dilution method. Newly obtained 6-(N-arylamino)-7-chloro5,8-quinolinedione derivatives showed potent antifungal and antibacterial activities. Among these derivatives, 1,3,5,7,8 and 9 showed more potent antifungal activities than fluconazole and griseofulvin. Also most of derivatives were found to be more active than ampicillin against gram-positive bacteria. 1 and 7 showed the very potent antifungal activities. 1 was the most efective in preventing the growth of Candida albicans, Aspergillus niger, Tricophyton mentagrophytes, Bacillus subtills and Staphylococcus aureus at MIC $1.6\;\mu{g/ml}$.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.391-394
• /
• 2013

In this study, nickel-zinc ferrite nanoparticles, with the chemical formula of $Ni_{0.3}Zn_{0.7-x}Cu_xFe_2O_4$ (where x = 0.1- 0.6 by step 0.1), were fabricated by the sol-gel method. The effect of copper substitution on the phase formation and crystal structure of the sample was investigated by X-ray diffraction (XRD), thermo-gravimetry (TG), differential thermal analysis (DTA), Fourier transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD result shows that due to the reduction of Zn content,the crystallite size of the sample increased. The results of the vibration sample magnetometer (VSM) exhibit an increase in saturation magnetization value (Ms) for samples with x ${\leq}$ 0.3 and a linear decrease for samples with x > 0.3. The variation of saturation magnetization and coercivity of the samples were then studied.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.248-254
• /
• 1990

Theoretical studies on the electrophilic substitution reactions of five-membered heteroaromatic compounds, furan, pyrrole and thiophene, with isopropyl cation were carried out using the MNDO method. The results indicated that site selectivities of ${\alpha},{\beta}$ and hetero-atoms are not controlled by electrostatic interactions but are determined mainly by charge trasfer stabilization between the HOMO of heteroaromatics and the LUMO of the electrophile. The reactivity order for ${\alpha}\;and\;{\beta}$ positions was pyrrole > furan > thiophene, in agreement with the solution-phase as well as the gas-phase experimental results.

• Korean Journal of Crystallography
• /
• v.7 no.1
• /
• pp.20-29
• /
• 1996

Sr0.6Ca0.4CuO2 single crystal has been synthesized by flux method and characterized by the single crystal X-ray diffraction. The compound has the orthorhombic system and the space group is Cmcm(63), lattice parameters are a=3.4645Å, b=16.1417Å, c=3.8727Å. In the (Sr1-xCax)CuO2 compound the limit of Ca from substitution for Sr was determined by the change of bond length. For this, X-ray diffraction, scanning electron microscopy (SEM), energy dispersive X-ray fluorescence (EDAX) and electron probe micro-analysis (EPMA) were used. From the change of Cu-O bond length as the Ca substitution, we concluded the limit of Ca incorporation Xca≒0.73.

• Korean Journal of Materials Research
• /
• v.24 no.1
• /
• pp.43-47
• /
• 2014

NiO-doped hibonite pigments were synthesized by the solid state method to get stabilized blue color pigment in both oxidation and reduction atmospheres. Optimum substitution condition with NiO for hibonite blue pigment was investigated. Experimental results were comparable to those of previous cobalt-minimization studies performed with other phosphate- or oxide-based cobalt-containing ceramic pigments (having olivine ($Co_2SiO_4$), spinel ($CoAl_2O_4$), or with co-doped willemite ($(Co,Zn)_2SiO_4$) structures). Composition was designed varying the NiO molar ratio increasing with $SnO_2$. The optimum substitution content is 0.93 mole NiO with 0.75mole $SnO_2$. The characteristics of the synthesized pigment were analyzed by XRD, Raman spectroscopy, SEM, and UV-vis. Synthesized pigment was applied to a lime-barium glaze with 10 wt% each and fired at an oxidation atmosphere of $1250^{\circ}C/1h$ and a reducing atmosphere $1240^{\circ}C/1h$. Blue color was obtained with $L^*a^*b^*$ values at 43.39, -6.78, -18.20 under a reducing atmosphere and 41.66, -6.36, -14.7 under and oxidation atmosphere, respectively.