• 연구논문집
• /
• 통권30호
• /
• pp.33-42
• /
• 2000

We must stabilize quickly increasing waste matters in urban life and livestock industry. Biogas including landfill gas and digester gas is byproduct of anaerobic decomposition of organic waste matter and contains 40%-70% methane, which can be used for energy purposes. Utilization of biogas reduce the emission of methane into the atmosphere to minimize greenhouse effect and the carbon dioxide (CO2) emitted when biogas is converted to energy has been taken out of the atmosphere by growing plant. Recently, bioenergy is world-widely noticeable as all contributing to the greenhouse effect. This paper presents development process of a biogas engine for cogeneration system and results of application to digester gas and landfill gas in site. The biogas engine is a dual fuel engine operated on biogas with a diesel pilot. At present, the engine can substitute biogas for diesel fuel up to 85%. but it can be said that there is a possibility of improvement in performance.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.149-152
• /
• 2004

Currently, with the development of an advanced industrial form, attention to human life has risen gradually. On the basis of aboves, Oriental medical industry has been achieved revolutionarily, and moreover the new word 'Well-being' has been born due to the value of life and attention to health. All who live in the 21-century have worried about problem with health and well-being, and the substitute medical science centering around the Oriental medicine has come up as the major concern, not to speak of the Oriental the West. Domestically, Research and attention to the Oriental medicine has increased, and its importance has appeared. At the moment, locally self-governing groups have taken an active step to study the genetic resources centering around locally- breedy wild medicinal herbfor their economy growth. Accordingly, in the historic view, to discover our medicinal herb's essence and to supply professional, systemical infomation of herb genetic, the necessity of professional exhibition museum can come up. under the above circumstances, I propose the public information museum in local area.

• Journal of Information Technology Applications and Management
• /
• 제27권5호
• /
• pp.1-22
• /
• 2020

Due to the low usage level of traditional financial services in many developing countries, Fintech services that often substitute for such traditional services with greater convenience have great potential in these markets. However, there have thus far been relatively few attempts to examine Fintech adoption in developing countries. As financial services are a highly sensitive industry in terms of government regulation and consumer trust, it is critical for policymakers to understand how to foster a healthy Fintech marketplace in developing country environments. In this paper, we review the scholarly literature on Fintech adoption with respect to three stakeholder groups: customers, service providers, and policymakers. Adding with practitioner-oriented documentation relating to Fintech adoption in Vietnam, we derive propositions for Fintech adoption research in Vietnam and similar developing countries. We collect these propositions as a framework that suggests avenues for future research.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.139-144
• /
• 2012

In the automobile industry, the various efforts to lower their industrial cost and enhance fuel efficiency have been made through process improvement or weight saving of automobile parts. Gear is one of significant parts of transmission, which is made by cast iron or alloy steel. It is expensive due to complex processing, inferior materials and large machining allowance. In this study, alternative gear cars oil which is based on fluid applications materials is produced by reducing surface induction hardening and carburizing hardened in production. And then, wear characteristic and mechanical properties such as hardness of the sintered alloy which is used as a substitute for small machining allowance is investigated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.148-149
• /
• 2013

Recently, the construction industry in South Korea, has experienced many difficulties in lack of supply with construction materials. Since waste shells can be possibly used as replacement materials of fine aggregate, the successful application can resolve, to some extent at least, the economic problems and environmental problems. In this research, the basic physical properties of the mortar which was used as fine aggregate substitute (clam, cockle, manila clam, oyster) were evaluated. According to the experimental results, the absorption rate and compressive strength of samples with various shells were equivalent to that of plain mortar. The mortar which replaced 25% of oyster shell with sand showed approximately 30% lower compressive strength and twice as much absorption as plain mortar. It was found that waste shells can be used as replacement materials of fine aggregate, but the oyster shell requires further experimental works in order for its successful application.

• 마이크로전자및패키징학회지
• /
• 제16권2호
• /
• pp.1-9
• /
• 2009

Conductive adhesives have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-containing solders. Numerous studies have shown that the conductive adhesives have many advantages over conventional soldering such as environmental friendliness, finer pitch feasibility and lower temperature processing. This review focuses on the recent research trends on the reliability and property evaluation of anisotropic and non-conductive films that interconnect the integrated circuit component to the printed circuit board or other types of substrate. Major topics covered are the conduction mechanism in adhesive interconnects; mechanical reliability; thermo-mechanical-hygroscopic reliability and electrical performance of the adhesive joints. This review article is aimed at providing a better understanding of adhesive interconnects, their principles, performance and feasible applications.

• 식품과학과 산업
• /
• 제49권3호
• /
• pp.17-28
• /
• 2016

The concerns over obesity and obesity-related health problems are increasing as many consumers relate these health problems with sugar. The demand for sugar reduction is also rising and regulatory movement by governments including Korea is driven to reflect such demand. For the past decades, there have been diverse development and marketing of various sweeteners to substitute sucrose and high fructose corn syrup. Low caloric alternative sweeteners can be divided into high intensity sweeteners that have greater sweetness potency compared to sucrose, and low intensity sweeteners such as polyols, oligosaccharides and rare sugars that have less sweetness potency. This paper discusses representative low caloric alternative sweeteners, their market and trend.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.226-227
• /
• 2021

Various attempts are being made to reduce carbon emissions through recycling of industrial by-products in the construction materials industry to reduce carbon emissions, and cement substitutes such as blast furnace slag and fly ash are widely used. Although it is suggested that the use of industrial by-product aggregate is possible in 'Aggregate', the use case of industrial by-product aggregate is very rare in the actual field. In this study, as an industrial by-product, fine slag aggregate is used as fine aggregate among aggregates that can be used as aggregate for concrete, and coarse aggregate is used as a substitute for natural aggregate. WWe tried to suggest various ways to expand the use of industrial by-product aggregates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• 한국식품과학회지
• /
• 제45권5호
• /
• pp.590-597
• /
• 2013

고전압 펄스 전기장 기술은 가열 공정을 대체할 수 있는 비가열 살균기술로서 꾸준한 연구가 이루어지고 있는 기술이다. 본 실험에서는 미생물의 생리적 측면에서 고전압 펄스 전기장 처리에 의한 효모의 생리적 변화를 살펴보았다. 내염성의 변화를 측정한 결과 사멸하지 않은 세포의 90-99% 이상이 세포 손상에 의해 내염성을 소실하였으며, 내염성을 회복하는데 약 4-6시간의 시간이 걸렸다. 고전압 펄스 전기장 처리 초기에는 세포 내외의 pH 구배(${\Delta}pH$)가 차이가 컸으나 처리시간이 증가함에 따라 그 차이가 감소하였다. 이는 세포의 pH 항상성을 유지시키는 $H^+$-traslocation 기능을 담당하고 있는 $H^+$-ATPase 활성이 소실되었거나 세포막 자체가 손상되어 pH 항상성을 잃어버렸기 때문으로, 이는 고전압 펄스 전기장 처리한 세포의 $H^+$-ATPase의 활성이 초기부터 크게 감소하는 것으로 확인할 수 있었다. 또한 세포의 해당활성이 고전압 펄스 전기장 처리에 의해 크게 감소하여 세포의 대사 기능이 손상되는 것을 확인하였다.