• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.77-89
• /
• 2020

Submerged floating tunnel (SFT) is a type of tunnel that allows tunnel segments to float underwater by buoyancy, and is being actively studied in recent years. When the submerged floating tunnel is connected to the ground, the tunnel and the bored tunnel inside the ground must be connected. There is risk that the stress will be concentrated at the connection between the two tunnels due to the different constraints and behavior of the two tunnels. Therefore, special design and construction methods should be applied to ensure the stability around the connection. However, previous studies on the stability at the connection site have not been sufficiently carried out, so study on the basic stage of the stability at connection site are necessary. In this study, numerical analysis simulating the connection between submerged floating tunnel and the bored tunnel confirmed that the shear strain concentration occurred in the ground around the connection, and it was analyzed that the structural factors can be handled during construction to have effects on the stability of the ground around the connection. Numerical results show that the risks from disproportionate displacements in the two tunnels can be mitigated through the construction of grouting material and joint design. Although the results from this study are qualitative results, it is expected that it will contribute to the determination of structural factors and risk areas that should be considered in the design of connections between the submerged floating tunnel and bored tunnel in the future studies.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.53-57
• /
• 2002

This is a study on the houses that will be submerged by the construction of hwa-buk dam. The purpose of this study is to record the folk houses that will be disappeared, and to make clear the regional characteristics of folk houses in this area. The type of site plan presents variously according to the location of several important factors. Types of site plan that are presented in this area are 4 (-, \ulcorner, equation omitted, - ), and \ulcorner, type is general. Types of houses according to the number of front room unit are 2. And 3room and 4 room type enlarge the living space by installing the toe-gan. In case of the 4 room-type is having Maru between rooms. The 3 room type shows superior distribution than the 4 room type.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.961-969
• /
• 2016

Due to the recent requirement of installing low-head structures considering environmental aspects, various types of fixed weir have been suggested. However, the design guideline of transverse structures for practical application is very limited. The purpose of the present study is to analyze the hydraulic properties of the fixed weirs installed at the small and middle sized rivers of Korea depending on the physical specifications to provide fundamental data that may be reflected to the design of a low-head fixed weir considering the relevant environmental aspects. The basic discharge coefficient of slope-type and step-type weirs depending on change of crest was estimated, and a stage-discharge curve was developed. In addition, the flow properties under free flow and submerged flow conditions were analyzed by varying the hydraulic conditions such as discharge and crest.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.215-223
• /
• 2010

Purpose: The present study was aimed to evaluate the level of cortical bone strain during the placement of an implant. The primary concern was to investigate if the extent of overloading area near the marginal bone could be affected by microthread fabricated at the cervical 1/3 of an implant. Materials and methods: Three dimensional finite element analysis was used to simulate the insertion of 3 implants. Control model was $4.1{\times}10$ mm implant (Submerged model, Dentis Co,, Daegu, Korea) equipped with a main thread only. Type I was with main thread and microthread, and Type II had similar thread pattern but was of tapered body. A PC-based finite element software (DEFORM 3D ver 5, SFTC, Columbus, OH, USA) was used to calculate a total of 3,600 steps of analysis, which simulated the whole insertion. Results: Results showed that the strain field in the marginal bone within 1 mm of the implant wall was higher than 4,000 micro-strain in the control model. The size of bone overloading was 1-1.5 mm in Type I, and greater than 2 mm in Type II implants. Conclusion: These results indicate that the marginal bone may be at the risk of resorption on receiving the implant for all 3 implant models studied. Yet, the risk was greater for Type I and Type II implants, which had microthread at the cervical 1/3.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.8-17
• /
• 1995

LNG를 저장할 수 있는 탱크는 주로 지상식이거나 반지하식이며 그 용량은 매우 다양하다. 우리나라에서는 지상식 탱크가 평택 인수기지에 10만m$^{3}$급 Membrane Type 6기가 건설되었고 1기는 거의 완성단계이며, 현재 추가로 건설 중인 3기를 포함하면 총 10기의 탱크를 확보하게 된다. 또한 제2인수기지인 인천에도 동급 으로서 9%Ni강을 사용하는 Double Wall Type LNG 탱크 3기를 건설 중이다. 전세계적 으로 볼 때 LNG 저장 탱크의 78%는 지상식으로 Double Wall Type 또는 Membrane 저장 탱크 형식을 취하고 있으나, 최근에는 안전성 측면, 토지 가격의 상승, 토지의 합리적 이용 측면 등을 감안하여 LNG 탱크를 지하화, 대형화하는 추세이다. 본고에서는 Fig. 1과 같은 구조의 Double Wall Type LNG 저장탱크 중 초저온의 LNG에 직접 접하는 저 온용 재료(9%니켈강)로 만들어지는 내조 용접에 대해서 중점적으로 논하기로 하며, 특히 9% 니켈강 Shell Plate Horizontal Joint에 채용되는 Automatic Submerged ARC 용접에 대해 실제 현장 용접 시공상태를 나타내고자 한다.

• Journal of Ecology and Environment
• /
• v.33 no.1
• /
• pp.23-36
• /
• 2010

The Cat Ba Islands in Hai Phong City, northern Vietnam, consist of a large limestone island with a maximum height of 322 m above sea level and 366 small limestone islets with a total area of about $180\;km^2$. The islands are relicts of karst limestone mountains that became submerged during the Holocene transgression 7000 - 8000 year ago. The combination of the longtime karst process and recent marine processes in the monsoonal tropical zone has created a very diversity landscape on the Cat Ba Islands that can be divided into 3 habitat types with 16 forms. The first habitat type is the karst mountains and hills, including karst mountains and hills, karst valleys and dolines, karst lakes, karst caves, and old marine terraces. The second habitat type is the limestone island coast, including beaches, mangrove marshes, tidal flats, rocky coasts, marine notch caves, marine karst lakes, and bights. The third habitat type is karst plains submerged by the sea, including karst cones (fengcong) and towers (fengling), bedrock exposed on the seabed, sandy mud seabed, and submerged channels. Like the landscape, the biodiversity is also high in ecosystems composed of scrub cover - bare hills, rainy tropical forests, paddy fields and gardens, swamps, caves, beaches, mangrove forests, tidal flats, rocky coasts, marine krast lakes, coral reefs, hard bottoms, seagrass beds and soft bottoms. The ecosystems on the Cat Ba Islands that support very high species biodiversity include tropical evergreen rainforests, soft bottoms; coral reefs, mangrove forests, and marine karst lakes. A total of 2,380 species have been recorded in the Cat Ba Islands, included 741 species of terrestrial plants; 282 species of terrestrial animals; 30 species of mangrove plants; 287 species of phytoplankton; 79 species of seaweed; 79 species of zooplankton; 196 species of marine fishes; 154 species of corals; and 538 species of zoobenthos. Many of these species are listed in the Red Book of Vietnam as endangered species, included the white-headed or Cat Ba langur (Trachypithecus poliocephalus), a famous endemic species. Human activities have resulted in significantly changes to the landscape end ecosytems of the Cat Ba islands; however, many natural aspects of the islandsd have been preserved. For this reason, the Cat Ba Islands were recognized as a Biological Reserved Area by UNESCO in 2004.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.4
• /
• pp.365-370
• /
• 2009

The aim of this study was to investigate the vegetation types of Minarimot, in Jeju Islands. The vegetation types were classified by the Z-M school method and cluster analysis. The vegetation in Minarimot was classified into 6 communities and 2 subcommunities: Persicaria thunbergii-Isachne globosa community (vegetation type: A), Scirpus tribangulatus-Eleocharis manillata var. cyclocarpa community (B) (Aneilema keisak subcommunity (B-1) and Caldesia parnassifolia-Potamogeton distinctus subcommunity (B-2)), Eleocharis kuroguwai community (C), Phragmites communis community (D), Scirpus tabernaemontani community(E) and Typha orientalis community (F). These communities were grouped into three main categories according to cluster analysis. The community (A) established at the edge of the wetland which has the driest condition was distinguished as Group I, while the community (B) emerged in the submerged zone was distinguished as Group III. The Group II was designated as the communities (C, D, E, F) between Group I and III, whose communities were occasionally submerged. The result of principal coordinate analysis (PCoA) appeared that the different vegetation established along the wetland were depending on water environment such as water depth and the period submerged.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.263-269
• /
• 2011

In the operation of submerged membrane-coupled sequencing batch reactor, the effect of filling step on the removal efficiency and filtration performance were investigated. Two sets of operation modes, the filling step located in the beginning of aerobic step (Mode-1) and the beginning of anoxic step (Mode-2), during 89 days were conducted. There was no wide difference in the COD removal and filtration performance between two sets of operation modes. But in the removal efficiency of nutrients (total nitrogen and total phosphorous), Mode-2 was more effective than Mode-1. In the case of Mode-2, average removal efficiencies of COD, total nitrogen, and total phosphorous were 99.1, 73.3, and 77.3%, respectively.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.279-285
• /
• 2018

The pervaporation separation of isopropanol/water mixture was carried out on a series of chemically cross-linked poly(vinyl alcohol)(PVA) composite membranes. The membranes were prepared by casting three kinds of PVA solutions with varying concentrations of PVA and GA onto polyacrylonitrile (PAN) support followed by thermal cross linking. As the PVA concentration increased, the flux decreased but separation factor was increased. It was confirmed that the composite membrane coated with PVA-3 (98~99% hydrolyzed) at a concentration of 7 wt% PVA and 20 wt% glutaraldehyde (GA) exhibited a flux of $209g/m^2h$ and a separation factor of more than 100. The submerged module test was carried out with controlled feed tank temperature and IPA concentration of the feed solution. The continuous concentration of IPA solution was increased from 90% to 99% after 60 h.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.104-113
• /
• 1992

The hydrodynamic problem is treated here when a pressurized bag is submerged partially into water and the end points of it oscillate. SES(Surface Effect Ship)has a bag filled with pressurized air at the stern in order to prevent the air leakage, and the pitch motion of SES is largely affected by the hydrodynamic force of the bag. The shape of a bag can be determined with the pressure difference between inside and outside. Once the hydrodynamic pressure is given, the shape of a bag can be obtained, however in order to calculate the hydrodynamic pressure we should know the shape change of the bag, and vice versa. Therefore the type of boundary condition on the surface of a bag is a moving boundary like a free surface boundary. In this paper, the formulation of this problem was done and linearized. The calculation scheme for the radiation problem of an oscillating bag is shown in comparison with the case that the bag is treated as rigid body. The hydrodynamic forces are calculated for various values of the pressure inside the bag and the submerged depth.