• Nano
• /
• 제13권10호
• /
• pp.1850121.1-1850121.11
• /
• 2018

In this study, a series of $LaMnO_3$-diamond composites with varied $LaMnO_3$ mass contents supported on micro-diamond have been synthesized using a sol-gel method. The as-prepared composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and the Fourier transform infrared spectra (FTIR). Meanwhile, the photocatalytic performances were also tested by photoluminescence (PL) spectroscopy, ultraviolet-visible diffuse reflection spectra (UV-Vis DRS) and the degradation of weak acid red C-3GN (RC-3GN). Results show that the peak position of $LaMnO_3$ is shifted to low angle after the introduction of diamond, and perovskite particles uniformly distributed on the surface of diamond, forming a network structure, which can increase the active sites and the absorption of dye molecules. When the mass ratio of $LaMnO_3$ and diamond is 1:2 (LMO-Dia-2), the composite shows the most excellent photocatalytic activity. This result offers a sample route to enlarge the range of the application of micro-diamond and provide a new carrier for perovskite photocatalysts.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.395-399
• /
• 2011

In this study, micro gas sensors for ammonia gas were prepared by adopting MEMS technology and using a sol-gel process. Three types of sensors were prepared via different synthesis routes starting with W sol and Ru sol mixture. This mixture was deposited on a MEMS platform and the platform was subsegueny heated to a temperature of $350^{\circ}C$. The topography and crystal structure of the sensing film were studied using FE-SEM and XRD. The response of the gas sensor to $NH_3$ gas was examined at various operating temperatures and gas concentrations. The sensor response increased almost linearly with gas concentration and the best sensing response was obtained at $333^{\circ}C$ for 5.0 ppm $NH_3$ for the specimen prepared by coating $WO_3$ powders with the Ru sol mixture.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.220-220
• /
• 2022

Disproportionating Enzyme 1 (DPE1) is an a-1,4-D-glucanotransferase that cleavages the a-1,4-glucosidic bonds and transfers glucosyl groups. In rice endosperm, it participates in starch synthesis by transferring maltooligosyl groups from amylose and amylopectin to amylopectin. Here, we investigated the haplotype variations and evolutionary indices (e.g., genetic diversity and population structure) for the DPE1 gene in 374 rice accessions representing seven subgroups (wild, indica, temperate japonica, tropical japonica, aus, aromatic, and admixture). Variant calling analysis of DPE1 coding regions leads to the identification of six functional haplotypes representing/occupying 8 nonsynonymous SNPs. Nucleotide diversity analysis revealed the highest pi-value in wild group (0.0556) compared to other cultivated groups, of which temperate japonica showed the most reduction of genetic diversity value (0.003). A significant positive Tajima's D value (1.6330) of admixture highlights sudden population contraction under balancing selection, while temperate japonica with the lowest Tajima's D value (-1.3523) showed a selection signature of DPE1 domestication which might be the cause of excess of rare alleles. Moreover, these two subpopulations exhibits a greater differentiation (F_ST=0.0148), indicating a higher genetic diversity. Our findings on functional DPE1 haplotypes will be useful in future breeding programs, and the evolutionary indices can also be applicable in functional studies of the DPE1 gene.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.507-512
• /
• 2003

The LiN $i_{l-y}$ $Co_{y}$ $O_2$ samples were synthesized at 80$0^{\circ}C$ and 85$0^{\circ}C$, by the solid-state reaction method, from the various starting materials LiOH, L $i_2$C $O_3$, NiO, NiC $O_3$, $Co_3$ $O_4$, CoC $O_3$, and their electrochemical properties are investigated. The LiN $i_{l-y}$ $Co_{y}$ $O_2$ pre-pared from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ exhibited the $\alpha$-NaFe $O_2$ structure of the rhombohedral system (space group; R3m). As the Co content increased, the lattice parameters a and c decreased. The reason is that the radius of Co ion is smaller than that of Ni ion. The increase in da shows that two-dimensional structure develops better as the Co content increases. The LiN $i_{0.7}$ $Co_{03}$. $O_2$［HOO(800,0.3)] synthesized at 80$0^{\circ}C$from LiOH, NiO, and $Co_3$ $O_4$ exhibited the largest first discharge capacity 162 mAh/g. The size of particles increases roughly as the valve of y increases. The samples with the larger particles have the larger first discharge capacities. The cycling performances of the samples with the first discharge capacity larger than 150 mAh/g were investigated. The LiN $i_{0.9}$ $Co_{0.1}$ $O_2$［COO(850,0.1)］ synthesized at 85$0^{\circ}C$ from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ showed an excellent cycling performance. The sample with the larger first discharge capacity will be under the more severe lattice destruction, due to the expansion and contraction of the lattice during intercalation and deintercalation, than the sample with the smaller first discharge capacity. As the first discharge capacity increases, the capacity fading rate thus increases.increases.s.s.s.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1090-1096
• /
• 2005

$Ag_4Br_4$ nanoclusters have been synthesized in about 75% of the sodalite cavities of fully $K^+$-exchanged zeolite A (LTA). An additional KBr molecule is retained in each large cavity as part of a near square-planar $K_4Br^{3+}$ cation. A single crystal of $Ag_{12}$-A, prepared by the dynamic ion-exchange of $Na_{12}$-A with aqueous 0.05 M $AgNO_3$ and washed with $CH_3OH$, was placed in a stream of flowing 0.05 M KBr in $CH_3OH$ for two days. The crystal structure of the product ($K_9(K_4Br)Si_{12}Al_{12}O_{48}{\cdot}0.75Ag_4Br_4$, a = 12.186(1) $\AA$) was determined at 294 K by single-crystal X-ray diffraction in the space group Pm m. It was refined with all measured reflections to the final error index $R_1$ = 0.080 for the 99 reflections for which $F_o\;{\gt}\;4_{\sigma}\;(F_o)$. The thirteen $K^+$ ions per unit cell are found at three crystallographically distinct positions: eight $K^+$ ions in the large cavity fill the six-ring site, three $K^+$ ions fill the eight-rings, and two $K^+$ ions are opposite four-rings in the large cavity. One bromide ion per unit cell lies opposite a four-ring in the large cavity, held there by two eight-ring and two six-ring $K^+$ ions ($K_4Br^{3+}$). Three $Ag^+$ and three $Br^-$ions per unit cell are found on 3-fold axes in the sodalite unit, indicating the formation of nano-sized $Ag_4Br_4$ clusters (interpenetrating tetrahedra; symmetry $T_d$; diameter ca. 7.9 $\AA$) in 75% of the sodalite units. Each cluster (Ag-Br = 2.93(3) $\AA$) is held in place by the coordination of its four $Ag^+$ ions to the zeolite framework (each $Ag^+$ cation is 2.52(3) $\AA$ from three six-ring oxygens) and by the coordination of its four $Br^-$ ions to $K^+$ ions through six-rings (Br-K = 3.00(4) $\AA$).

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.181-187
• /
• 2016

본 연구에서는 납이나 크롬이 함유되지 않은 친환경적인 물질의 새로운 주황 무기 안료를 개발하고자 하였다. 고상반응법을 이용하여 LPG와 Air를 이용한 환원분위기에서 $TiO_2-SnO-ZnO$계 주황색 무기 안료를 합성하였다. 합성 된 안료들의 특성을 분석하기 위하여 표색계 값인 $L^*a^*b^*$ 값을 측정 후, XRD를 이용하여 결정 상을 분석하였고, SEM을 이용하여 미세구조 관찰하였으며, XPS를 이용하여 원소들의 산화가 상태를 분석하였다. 고상 반응법으로 합성 후 열처리한 $TiO_2-SnO-ZnO$ 안료는 yellow에서 orange-red 사이의 색을 가진다. $TiO_2-SnO-ZnO$ 안료의 결정상 분석 결과, 5가지의 결정상이 혼재하는 것을 볼 수 있는데, $SnO_2$가 cubic과 tetragonal 구조 중 어떤 결정 구조를 가지는지가 발색의 가장 중요한 요인으로 작용하는 것을 확인하였다. XPS를 이용하여 원소들의 산화가 상태를 분석한 결과, $Sn^{4+}$의 비율이 높을수록 안료가 rYR에 가까운 색을 가지는 것을 확인할 수 있다.

• 전기화학회지
• /
• 제17권4호
• /
• pp.229-236
• /
• 2014

본 연구에서는 리튬이온 이차전지 양극 활물질로 사용되는 $LiFePO_4$ 활물질을 이용하여 전지를 제조한 후 그 특성들을 평가하였다. 공침법을 이용하여 $FePO_4$ 전구체를 합성한 후 생성된 전구체에 리튬을 합성시키며, 열처리를 통하여 활물질을 생성시킨다. 열처리 온도에 의한 결과 중 $750^{\circ}C$에서의 결과가 가장 우수함을 확인하였으며 전도성을 확보하기 위하여 카본을 코팅하는 방법을 물리적 코팅 방식과 화학적 코팅방법으로 나누어 실험하였으며 물리적 카본 코팅의 결과 6wt%를 코팅했을 때 125 mAh/g의 용량을 보였으며 화학적 코팅에서는 코팅하지 않은 기본 활물질 보다 약 40%의 성능향상을 보여 130~140 mAh/g 대의 활물질 용량을 보였다. 다공성 구조체를 형성하기 위하여 nanocomposite을 투입한 실험에서는 $Al_2O_3$를 첨가한 활물질이 porous 형태의 구조체를 형성하고 $SiO_2$을 첨가한 활물질 보다 132 mAh/g의 용량으로 우수함을 알 수 있었다.

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.301-306
• /
• 2014

Titanium alloys are extensively used in high-temperature applications due to their excellent high strength and corrosion resistance properties. However, titanium alloys are problematic because they tend to be extremely difficult-to-cut material. In this paper, the powder synthesis, spark plasma sintering (SPS), bulk material characteristics and machinability test of hybrid $Ti_2AlC$ ceramic bulk materials were systematically examined. The bulk samples mainly consisted of $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Random orientation and good crystallization of the $Ti_2AlC$ was observed at $1100^{\circ}C$ for 10 min under SPS sintering conditions. Scanning electron microscopy results indicated a homogeneous distribution and nano-laminated structure of $Ti_2AlC$ MAX phase. The hardness and electrical conductivity of $Ti_2AlC$ were higher than that of Ti 6242 alloy at sintering temperature of $1000^{\circ}C{\sim}1100^{\circ}C$. Consequently, the machinability of the hybrid $Ti_2AlC$ bulk materials is better than that of the Ti 6242 alloy for micro-EDM process of micro-hole shape workpiece.

• 한국재료학회지
• /
• 제28권4호
• /
• pp.214-220
• /
• 2018

We report on the fabrication and photoelectrochemical(PEC) properties of a $Cu_2O$ thin film/ZnO nanorod array oxide p-n heterojunction structure with ZnO nanorods embedded in $Cu_2O$ thin film as an efficient photoelectrode for solar-driven water splitting. A vertically oriented n-type ZnO nanorod array was first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method and then a p-type $Cu_2O$ thin film was directly electrodeposited onto the vertically oriented ZnO nanorods array to form an oxide semiconductor heterostructure. The crystalline phases and morphologies of the heterojunction materials were characterized using X-ray diffraction and scanning electron microscopy as well as Raman scattering. The PEC properties of the fabricated $Cu_2O/ZnO$ p-n heterojunction photoelectrode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the $Cu_2O/ZnO$ photoelectrode was found to exhibit a negligible dark current and high photocurrent density, e.g., $0.77mA/cm^2$ at 0.5 V vs $Hg/HgCl_2$ in a $1mM\;Na_2SO_4$ electrolyte, revealing an effective operation of the oxide heterostructure. In particular, a significant PEC performance was observed even at an applied bias of 0 V vs $Hg/HgCl_2$, which made the device self-powered. The observed PEC performance was attributed to some synergistic effect of the p-n bilayer heterostructure on the formation of a built-in potential, including the light absorption and separation processes of photoinduced charge carriers.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.38-42
• /
• 2016

$BaTiO_3$-coated Fe nanofibers are synthesized via a three-step process. ${\alpha}-Fe_2O_3$ nanofibers with an average diameter of approximately 200 nm are first prepared using an electrospinning process followed by a calcination step. The $BaTiO_3$ coating layer on the nanofiber is formed by a sol-gel process, and a thermal reduction process is then applied to the core-shell nanofiber to selectively reduce the ${\alpha}-Fe_2O_3$ to Fe. The thickness of the $BaTiO_3$ shell is controlled by varying the reaction time. To evaluate the electromagnetic (EM) wave-absorbing abilities of the $BaTiO_3@Fe$ nanofiber, epoxy-based composites containing the nanofibers are fabricated. The composites show excellent EM wave absorption properties where the power loss increases to the high frequency region without any degradation. Our results demonstrate that the $BaTiO_3@Fe$ nanofibers obtained in this work are attractive candidates for electromagnetic wave absorption applications.