• Resources Recycling
• /
• v.20 no.6
• /
• pp.78-82
• /
• 2011

Supercritical $CO_2$($scCO_2$) extraction has a great possibility to be a new process to recover metal and to replace the existing leaching/solvent extraction processes. The cobalt extraction was carried out using $scCO_2$ from cobalt sulphate solution. The bis (2,4,4-trimethylpentyl) phosphinic acid and diethylamine ligands were used to extract cobalt ion in $scCO_2$. The recommended method consists of $scCO_2$/extractants complexation process and metal extraction process at 60, 200bar. Experimental results showed that the extraction efficiency of Co was increased by 16-99% with increasing the ligand amount.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• Journal of Powder Materials
• /
• v.28 no.3
• /
• pp.221-226
• /
• 2021

We fabricate the non-equiatomic high-entropy alloy (NE-HEA) Fe_49.5Mn₃₀Co₁₀Cr₁₀C_0.5 (at.%) using spark plasma sintering under various sintering conditions. Each elemental pure powder is milled by high-energy ball milling to prepare NE-HEA powder. The microstructure and mechanical properties of the sintered samples are investigated using various methods. We use the X-ray diffraction (XRD) method to investigate the microstructural characteristics. Quantitative phase analysis is performed by direct comparison of the XRD results. A tensile test is used to compare the mechanical properties of small samples. Next, electron backscatter diffraction analysis is performed to analyze the phase fraction, and the results are compared to those of XRD analysis. By combining different sintering durations and temperature conditions, we attempt to identify suitable spark plasma sintering conditions that yield mechanical properties comparable with previously reported values. The samples sintered at 900 and 1000℃ with no holding time have a tensile strength of over 1000 MPa.

• Analytical Science and Technology
• /
• v.35 no.5
• /
• pp.205-211
• /
• 2022

Deuterium (D) is an isotope with one more neutron number than hydrogen (H). Heavy elements rarely change their chemical properties with little effect even if the number of neutrons increases, but low-mass elements change their vibration energy, diffusion rate, and reaction rate because the effect cannot be ignored, which is called an isotope effect. Recently, in the semiconductor and display industries, there is a trend to replace hydrogen gas (H₂) with deuterium gas (D₂) in order to improve process stability and product quality by using the isotope effect. In addition, as the demand for D₂ in industries increases, domestic gas producers are making efforts to produce and supply D₂ on their own. In the case of high purity D₂, most of them are produced by electrolysis of heavy water (D₂O), and among D₂, hydrogen deuteride (HD) molecules are present as isotope impurities. Therefore, in order to maximize the isotope effect of hydrogen in the electronic industry, HD, which is an isotope impurity of D₂ used in the process, should be small amount. To this end, purity analysis of D₂ for industrial processing is essential. In this study, HD quantitative analysis of D₂ for high purity D₂ purity analysis was established and hydrogen isotope RM (Reference material) was developed. Since hydrogen isotopes are difficult to analyze with general gas analysis instrument, they were analyzed using a high-precision mass spectrometer (Gas/MS, Finnigan MAT271). High purity HD gas was injected into Gas/MS, sensitivity was determined by a signal according to pressure, and HD concentrations in two bottles of D₂ were quantified using the corresponding sensitivity. The amount fraction of HD in each D₂ was (4518 ± 275) μmol/mol, (2282 ± 144) μmol/mol. D₂, which quantifies HD amount using the developed quantitative analysis method, will be manufactured with hydrogen isotope RM and distributed for quality management and maintenance of electronic industries and gas producers in the future.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.609-612
• /
• 2001

An adaptive sub-optimal method using a preset threshold for combining partial transmit sequence (PTS) of an orthogonal frequency division multiplexing (OFDM) signal is presented. The results show that adaptive sub-optimal method reduces the 0.1% PAP by 3.4dB, while iterative flipping method reduces it by 3dB and PTS reduce it by 4.1dB. The complexity of adaptive sub-optimal method is 2.4% of that of PTS method for M=8.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.720-734
• /
• 2023

In Korea, Korea Proven Bulls (KPN) program has been well-developed. Breeding and evaluation of cows are also an essential factor to increase earnings and genetic gain. This study aimed to evaluate the accuracy of cow breeding value by using three methods (pedigree index [PI], pedigree-based best linear unbiased prediction [PBLUP], and genomic-BLUP [GBLUP]). The reference population (n = 16,971) was used to estimate breeding values for 481 females as a test population. The accuracy of GBLUP was 0.63, 0.66, 0.62 and 0.63 for carcass weight (CWT), eye muscle area (EMA), back-fat thickness (BFT), and marbling score (MS), respectively. As for the PBLUP method, accuracy of prediction was 0.43 for CWT, 0.45 for EMA, 0.43 for MS, and 0.44 for BFT. Accuracy of PI method was the lowest (0.28 to 0.29 for carcass traits). The increase by approximate 20% in accuracy of GBLUP method than other methods could be because genomic information may explain Mendelian sampling error that pedigree information cannot detect. Bias can cause reducing accuracy of estimated breeding value (EBV) for selected animals. Regression coefficient between true breeding value (TBV) and GBLUP EBV, PBLUP EBV, and PI EBV were 0.78, 0.625, and 0.35, respectively for CWT. This showed that genomic EBV (GEBV) is less biased than PBLUP and PI EBV in this study. In addition, number of effective chromosome segments (M_e) statistic that indicates the independent loci is one of the important factors affecting the accuracy of BLUP. The correlation between M_e and the accuracy of GBLUP is related to the genetic relationship between reference and test population. The correlations between M_e and accuracy were -0.74 in CWT, -0.75 in EMA, -0.73 in MS, and -0.75 in BF, which were strongly negative. These results proved that the estimation of genetic ability using genomic data is the most effective, and the smaller the M_e, the higher the accuracy of EBV.

• Analytical Science and Technology
• /
• v.35 no.6
• /
• pp.249-255
• /
• 2022

In this study, a new method for the analysis of high-purity nitrogen was developed. A gas chromatography-flame ionization detector (GC-FID) was used for purity analysis. Certified reference materials (CRMs) at a level of 3 µmol/mol of carbon monoxide (CO), carbon dioxide (CO₂), and methane (CH₄), which may exist in high-purity nitrogen, were prepared using the gravimetric method, and these CRMs were used for purity analysis. In this new method, ultra-high-purity and high-purity nitrogen were used as carrier gases. The impurities in high-purity nitrogen were quantitatively analyzed by comparing the differences in the area values of the GC chromatograms of the prepared CRMs. We purchased liquid nitrogen and three bottles of nitrogen gas, which were produced by three different manufacturers, using high-purity nitrogen. Furthermore, to validate the developed purity analysis method, the fraction of impurities in high-purity nitrogen was compared with the results of the typical purity analysis method. The comparison results were consistent within the expanded uncertainties (k = 2).

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.920-923
• /
• 1998

In this work, the adsorption characteristics of the activated carbon treated with 30 wt. %HCl and 30 wt. % NaOH were investigated. The acid and base values were determined by Boehm's method and the surface area and porosity was measured by BET-method with $N_2$-adsorption. Also, the adsorption characteristics of the activated carbons treated with acid and base chemical solutions were investigated with $CO_2$ and $NH_3$-adsorption. From which, relatively different adsorption behaviors of the modified activated carbons were observed in the amounts of $CO_2$ and $NH_3$ adsorptions, even though the physical surface structures of the activated carbons, such as specific surface area, pore size and pore volume, were not significantly changed.

• Journal of Powder Materials
• /
• v.15 no.1
• /
• pp.1-5
• /
• 2008

ZnS-$SiO_2$ composite is normally used for sputtering target. In recent years, high sputtering power for higher deposition rate often causes crack formation of the target. Therefore the target material is required that the sintered target material should have high crack resistance, excellent strength and a homogeneous microstructure with high sintered density. In this study, raw ZnS and ZnS-$SiO_2$ powders prepared by a 3-D mixer or high energy ball-milling were successfully densified by spark plasma sintering, the effective densification method of hard-to-sinter materials in a short time. After sintering, the fracture toughness was measured by the indentation fracture (IF) method. Due to the effect of crack deflection by the residual stress occurred by the second phase of fine $SiO_2$, the hardness and fracture toughness reached to 3.031 GPa and $1.014MPa{\cdot}m^{1/2}$, respectively.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.364-369
• /
• 2010

A $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor powder with stuffed tridymite structure was synthesized by glycine-nitrate combustion method. The luminescence, formation process and microstructure of the phosphor powder were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy (PL). The XRD patterns show that the as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor was an amorphous phase. However, a crystalline $SrAl_2O_4 $ phase was formed by calcining at $1200^{\circ}C$ for 4h. From the SEM analysis, also, it was found that the as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor was in irregular porous particles of about 50 ${\mu}m$, while the calcined phosphor was aggregated in spherical particles with radius of about 0.5 ${\mu}m$. The emission spectrum of as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor did not appear, due to the amorphous phase. However, the emission spectrum of the calcined phosphor was observed at 520 nm (2.384eV); it showed green emission peaking, in the range of 450~650 nm. The excitation spectrum of the $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor exhibits a maximum peak intensity at 360 nm (3.44eV) in the range of 250~480 nm. After the removal of the pulse Xe-lamp excitation (360 nm), also, the decay time for the emission spectrum was very slow, which shows the excellent longphosphorescent property of the phosphor, although the decay time decreased exponentially.