• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.269-273
• /
• 2013

Underwater acoustic channels are generally recognized as one of the most difficult communication media because of the multipath propagation, dispersion, and so on. MIMO (Multiple-input multiple-output) techniques have been actively pursued in underwater acoustic communications recently to increase the data rate over the bandwidth-limited channels. The transmit diversity techniques can be applied in this case, and one of them is Alamouti's scheme. In this paper the performances of the transmit diversity technique are evaluated via experiment. Two transmitters and two receivers were used in experiment, and the experiment was performed in indoor water tank. The error rate 5~8% was confirmed in experimental results, and these are the improved values than the error rate 14.8% for SISO(Single-input single-output) channel under same data rate condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.100-104
• /
• 2012

Fin-type SONOS (silicon-oxide-nitride-oxide-silicon) flash memory has emerged as novel devices having superior controls over short channel effects(SCE) than the conventional SONOS flash memory devices. However despite these advantages, these also exhibit undesirable characteristics such as corner effect. Usually, the corner effect deteriorates the performance by increasing the leakage current. In this paper, the corner effect of fin-type SONOS flash memory devices is investigate by 3D Process and device simulation and their electrical characteristics are compared to conventional SONOS devices. The corner effect has been observed in fin-type SONOS device. The reason why the memory characteristic in fin-type SONOS flash memory device is not improved, might be due to existing undesirable effect such as corner effect as well as the mutual interference of electric field in the fin-type structure as reported previously.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.63-69
• /
• 2011

In this study, we report on the novel lithographic patterning method to fabricate organic thin film field effect transistors (OTFTs) based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30 nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce $Al_2O_3$ film grown via atomic layer deposition method onto pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated micron sized pentacene FETs and measured their electrical characteristics.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.5
• /
• pp.269-273
• /
• 2005

In horizontal cells (HCs) that were freshly dissociated from goldfish retina, two types of voltagedependent calcium currents ($I_{Ca}$) were recorded using a patch-clamping configuration: a transient type current and a sustained type current. The cell was held at -40 mV, and the prepulse step of -90 mV was applied before command pulse between -65 and +55 mV. The transient $Ca^{2+}$ current was activated by depolarization to around -50 mV from a prepulse voltage of -90 mV lasting at least 400 ms and reached a maximal value near -25 mV. On the other hand, the sustained $Ca^{2+}$ current was induced by pre-inactivation for less than 10 ms duration. Its activation started near -10 mV and peaked at +20 mV. $Co^{2+}$ (2 mM) suppressed both of these two components, but nifedipine ($20{\mu}M$), L-type $Ca^{2+}$ channel antagonist, blocked only the sustained current. Based on the activation voltage and the pharmacolog$I_{Ca}$l specificity, the sustained current appears to be similar to L-type $I_{Ca}$ and the transient type to T-type $I_{Ca}$. This study is the first to confirm that transient type $I_{Ca}$ together with the sustained one is present in HCs dissociated from goldfish retina.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.95-104
• /
• 2010

One of 21st century's main paradigms is a 'Culture', and people started to express their 'cultural desires and demands' regarding public environments. Accordingly central and local governments are paying attention to these demands from their citizens and trying to establish the policies to meet these needs. This research is done to suggest the strategy programming model to support the executions of culture-centered public designs which are based on the local resources and identities. The entire research contains three sub-topics. First topic is setting the prototype phases of strategy programming. Second topic is analyzing the associated indices for each prototype phase. Third topic is suggesting Matrix Model in which the prototype phases and their associated indices are linked. Among three topics, this paper deals with the first one - the prototype phases of strategy programming. It studies this subject in relation with Place Marketing which emphasizes the local resources and identities. The prototype phases are comprised of 3 steps for Place Strategy and 4 steps for Marketing Strategy. Place Strategy should be considered prior to Marketing Strategy because in culture-centered public design, locality has priority over other concerns. The phases for Place Strategy includes 'Resource_analyzing of local resources', 'Mission_setting a purpose', and 'Targeting_segmenting target groups'. The phases for Marketing Strategy involves 'Organization_instituting the main body and/or partnership', 'Image Positioning_setting an unique local image', 'Point_realizing the product', and 'Channel_deciding the sales promotion tools'.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1533-1546
• /
• 2013

Wireless multicast is considered as an effective transmission mode for the future mobile social contact services supported by Long Time Evolution (LTE). Though wireless multicast has an excellent resource efficiency, its performance suffers deterioration from the channel condition and wireless resource availability. Cognitive Radio (CR) and Device to Device (D2D) are two solutions to provide potential resource. However, resource allocation for cognitive wireless multicast based on D2D is still a great challenge for LTE social networks. In this paper, a joint sub-carriers and power allocation model based on D2D for general cognitive radio multicast (CR-D2D-MC) is proposed for Orthogonal Frequency-Division Multiplexing (OFDM) LTE systems. By opportunistically accessing the licensed spectrum, the maximized capacity for multiple cognitive multicast groups is achieved with the condition of the general scenario of imperfect spectrum sensing, the constrains of interference to primary users (PUs) and an upper-bound power of secondary users (SUs) acting as multicast source nodes. Furthermore, the fairness for multicast groups or unicast terminals is guaranteed by setting a lower-bound number of the subcarriers allocated to cognitive multicast groups. Lagrange duality algorithm is adopted to obtain the optimal solution to the proposed CR-D2D-MC model. The simulation results show that the proposed algorithm improves the performance of cognitive multicast groups and achieves a good balance between capacity and fairness.

• Journal of the Korea Computer Industry Society
• /
• v.5 no.5
• /
• pp.761-770
• /
• 2004

The multicarrier direct sequence code-division (MC-DS/CDMA) is a well-known multiple access and data transmission scheme that is applicable for various mobile and wireless communications. Particularly for modern, smart vehicles equipped with multiple sensors, MC-DS/CDMA is one of the possible means for giving the sensors to get connected one another for sending and receiving messages and control information. For intra-vehicalur communicaiton and networking applications, we have proposed a novel MC-DS/CDMA multiple access and data transmission scheme incorporating a new idea of inserting sub-symbol based cyclic prefixes for compromising inter-symbol interference. In the performance investigation of our MC-DS/CDMA, we have looked into system performances related to bandwidth utiltzation, coding gain, and multiple number of sensors. Since the channel delay is comparatively shorter inside of vehicle than any other general mobile channels, the proposed scheme can be a successful candidate for networking wireless sensors simultaneously operting in an intelligent vehicle.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.16-23
• /
• 2016

The purpose of this study is to analyze quantitatively the inundation causes by applying the prevention of performance objectives using the urban storm water runoff model XP-SWMM. The model was built by using DTM and storm sewer-network with the storm sewer and geo-data of the study area as input-data to assess the current performance of prevention. An analysis of the causes of the inundation by the frequency and the rainfall-duration. As a result, lack of pipe capacity due to flooding, as well as inundation heavier that the backwater rainfall occurs due to the rise of water level of outside. For solve the inundation damage, It is necessary to improvement pipe of capacity lack and installation of a flood control channel.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.25-47
• /
• 2013

In China, the commercial bank credit financing is the most important external financing channel for SMEs. However, the lack of credit guarantee significantly deters commercial banks to finance SMEs. which may generate a negative impact on the trade activities of SME in China. In this paper we examine the risk of credit guarantee for SMEs financing and the factors affecting this risk through a VAR (Value-at-Risk) model. Our analysis shows that the scale of enterprises' impact on the VAR (risk of financing guarantee) is not much relevant. We also find that the certainty of financing for SMEs, such as the fixed asset ratio, has a significant and negative effect on the VAR of Chinese credit guarantee institutions. The product uniqueness is positively correlated with the VAR, and operation risk is also positively related to the credit risk of Chinese credit guarantee institutions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.3-9
• /
• 2013

This paper proposes a selective-weighted energy detection (S-WED) and a synchronization algorithm appropriate for it in IR-UWB system. Energy detectors that are practical in terms of implementation are employed widely for noncoherent reception in IR-UWB systems. However, they show low performance due to using the energy samples captured at symbol rate. For this reason, weighted energy detectors are developed to improve the performance of EDs. Hence, for WED, not only synchronization but also the weight coefficients are needed to be obtained prior to data detection. Meanwhile, the optimal weighting coefficients of WEDs are known to be energy values. Therefore, synchronization and the weighting coefficients can be obtained simultaneously. This paper proposes an S-WED and a simple synchronization algorithm for it in which sub-intervals having energies under a certain level are excluded in energy accumulation resulting in a simpler WED with a bit performance increase in low SNR region. The proposed algorithm is verified through simulations using the preamble symbol and channel models defined in the IEEE 802.15.4a.