• 한국수학교육학회지시리즈A:수학교육
• /
• 제25권3호
• /
• pp.77-100
• /
• 1987

Let G : R$^n$${\times}$R\longrightarrowR$^n$ be defined by a Homotopy solving a system F($\chi$)=0 of nonlinear equations. For the vector v$\^$k/ with G'(u$\sub$k/)v$\^$k/=0, ∥v$\^$k/∥=1 where uk is one point in Zero Curve let u$\sub$0/$\^$k/=v$\^$k/＋$\tau$v$\^$k/ be the first prediction for the next point u$\^$k+1/, $\tau$$\in$(0, 1). When u$\sub$0/$\^$k/ approaching too losely to some unwanted point. to follow the Zero Curve may occur the returning or cycling. One lion for it is discussed and tile parametrizied Homotopy algorithm for solving F($\chi$)=0 with it been established. Also some theorems by means of the regular value have been discussed for Zero Curves of G(u)=0 and some theorems for algorithm have been obtained.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.81-89
• /
• 2022

It is necessary to increase the surface hardness and improve the wear resistance and peeling resistance through the surface treatment and performance evaluation of the mold steel. As a result of vacuum heat treatment analysis, residual austenite measurement and surface treatment wear test, retained austenite should be removed by sub-zero treatment, and retained austenite was completely removed by treatment at -196℃. The TiMon film coated on the sub-zero treated STD11 specimen showed the lowest coefficient of friction.

• Kyungpook Mathematical Journal
• /
• 제60권1호
• /
• pp.1-20
• /
• 2020

A simple but elegant result of Rival states that every sublattice L of a finite distributive lattice 𝒫 can be constructed from 𝒫 by removing a particular family 𝒥_L of its irreducible intervals. Applying this in the case that 𝒫 is a product of a finite set 𝒞 of chains, we get a one-to-one correspondence L ↦ 𝒟_𝒫(L) between the sublattices of 𝒫 and the preorders spanned by a canonical sublattice 𝒞^⋄ of 𝒫. We then show that L is a tight sublattice of the product of chains 𝒫 if and only if 𝒟_𝒫(L) is asymmetric. This yields a one-to-one correspondence between the tight sublattices of 𝒫 and the posets spanned by its poset J(𝒫) of non-zero join-irreducible elements. With this we recover and extend, among other classical results, the correspondence derived from results of Birkhoff and Dilworth, between the tight embeddings of a finite distributive lattice L into products of chains, and the chain decompositions of its poset J(L) of non-zero join-irreducible elements.

• 대한수학회지
• /
• 제60권1호
• /
• pp.167-193
• /
• 2023

Let f be a self-dual primitive Maass or modular forms for level 4. For such a form f, we define N^s_f(T):=|{ρ ∈ ℂ : |𝕵(ρ)| ≤ T, ρ is a non-trivial simple zero of L_f(s)}|.. We establish an omega result for N^s_f(T), which is $N^s_f(T) = \Omega(T^{\frac{1}{6}-{\epsilon}})$ for any ∊ > 0. For this purpose, we need to establish the Weyl-type subconvexity for L-functions attached to primitive Maass forms by following a recent work of Aggarwal, Holowinsky, Lin, and Qi.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.661-665
• /
• 2022

The 3 MeV proton irradiation effects on SiGe low noise amplifier (LNA) (NXP BGU7005) performance under different voltage supply VCC (0 V, 2.5 V) conditions were firstly experimental studied in this present work. The S parameters including S₁₁, S₂₂, S₂₁, 1 dB compression point and noise figure (NF) of the test samples under different bias voltage supply were measured and compared before and after 3 MeV proton irradiation. The total proton irradiation fluence was 1 × 10¹⁵ protons/cm². The maximum degradation quantities of the gain S₂₁ and NF of the test samples under zero bias are measured respectively 1.6 dB and 1.2 dB. Compared with the samples under 2.5 V bias supply, the maximum degradation of S₂₁ and NF are respectively 1.1 dB and 0.8 dB in the whole frequency band. It is noteworthy that the gain and NF of SiGe LNAs under zero-bias mode suffer enhanced degradation compared with those under normal bias supply. The key influence factors are discussed based on the correlation of the SiGe device and the LNA circuit. Different process of the ionization damage and displacement damage under zero-bias and 2.5 V bias voltage supply contributed to the degradation difference. The underlying physical mechanisms are analyzed and investigated.

• Bulletin of the Korean Chemical Society
• /
• 제29권11호
• /
• pp.2273-2276
• /
• 2008

• 한국지반환경공학회 논문집
• /
• 제19권3호
• /
• pp.5-13
• /
• 2018

최근 해빙기에 발생하는 지반붕괴로 인한 건설재해가 증가하고 있으며 이는 동절기에 시행되는 다짐시공과 관련이 많다. 영하온도에서 다짐을 실시할 경우 다짐효과가 감소하며 이에 따른 해빙기 지반의 거동 변화를 파악하는 것은 유용한 자료로 활용될 수 있을 것으로 판단된다. 또한 최근 국내 지반공학 분야에서 불포화 영역에 대한 관심이 높아지고 있는 만큼 지반재료의 영하온도 다짐 및 동결융해에 따른 불포화 특성을 파악한다면 앞으로 관련 분야의 연구자들에게도 좋은 정보를 제공할 수 있을 것으로 판단된다. 따라서 본 연구에서는 동절기 다짐에 따른 지반의 불포화 특성을 파악하기 위해 상온($18^{\circ}C$)과 영하온도($-3^{\circ}C$, $-8^{\circ}C$)에서 수행한 다짐시험의 결과를 바탕으로 성형한 시료에 불포화 함수특성시험과 불포화 일축압축시험을 수행하였으며, 시료에 동결융해를 반복적으로 가한 후 불포화 함수특성시험 및 일축압축시험을 수행하여 동결융해가 작용함에 따른 지반의 흡수력 및 불포화 특성의 변화를 파악하였다. 시험결과 영하온도에서의 다짐 및 동결융해에 의한 흡수력의 변화와 강도 및 강성의 감소를 확인하였다. 특히 풍화토의 경우 영하온도에서의 다짐과 동결융해가 진행될수록 강도와 흡수력이 상당히 감소하는 것으로 나타나 지반의 안정성에 상당한 영향을 미칠 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.1930-1932
• /
• 1997

Instantaneous active/reactive powers are defined in three phase four wire systems. The definition can be generally applicable to any source conditions and load conditions including nonlinear circuits. The zero-sequence power resulted from the zero-sequence voltage and zero-sequence current between two sub-systems affects both to the instantaneous active and reactive powers. The zero-sequence current can be controlled by compensation of the reactive power without power storage elements.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.68-75
• /
• 2023

This paper proposes a three-phase single-stage AC-DC converter for the small wind generation system. Input power factor improvement and insulated output can be implemented with the proposed three-phase single-stage AC-DC converter under the wide power generation voltage (80-260 V_ac) and frequency (10-42 Hz) in a small wind power generation (WPG) system. The proposed converter is also capable of zero-voltage switching in the primary-side switches and zero-current switching in the secondary-side diodes by phase-shift control at a fixed switching frequency. In addition, it is possible to control a wide output voltage (V_o: 39 V_DC-60 V_DC) by varying the link voltage and improving the input power factor (PF) and the total harmonic distortion factor (THD_i). Simulation and experimental results verified the validity of the proposed converter.

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.712-720
• /
• 2015

A model predictive current control (MPCC) method that does not employ a cost function is proposed. The MPCC method can decrease common-mode voltages in loads fed by three-phase voltage-source inverters. Only non-zero-voltage vectors are considered as finite control elements to regulate load currents and decrease common-mode voltages. Furthermore, the three-phase future reference voltage vector is calculated on the basis of an inverse dynamics model, and the location of the one-step future voltage vector is determined at every sampling period. Given this location, a non-zero optimal future voltage vector is directly determined without repeatedly calculating the cost values obtained by each voltage vector through a cost function. Without utilizing the zero-voltage vectors, the proposed MPCC method can restrict the common-mode voltage within ± V_dc/6, whereas the common-mode voltages of the conventional MPCC method vary within ± V_dc/2. The performance of the proposed method with the reduced common-mode voltage and no cost function is evaluated in terms of the total harmonic distortions and current errors of the load currents. Simulation and experimental results are presented to verify the effectiveness of the proposed method operated without a cost function, which can reduce the common-mode voltage.