• Ecology and Resilient Infrastructure
• /
• v.9 no.1
• /
• pp.36-58
• /
• 2022

In this study, the weather conditions corresponding to the increase in the environmental concentration of fine dust (PM₁₀) and ultrafine dust (PM_2.5) from 2001 to 2019 in Jeju and Seogwipo cities were analyzed. The increase in the levels of PM₁₀ and PM_2.5 was observed in the order: spring > winter > autumn > summer. In both cities, PM₁₀ and PM_2.5 levels increased more frequently during the day in spring and summer and at night in autumn and winter, with PM_2.5 showing a greater increase in concentration than PM₁₀. The air temperature and wind speed corresponding with increased levels of PM₁₀ were higher than their respective seasonal averages in spring and winter, but lower in summer and autumn. Relative humidity was lower than the seasonal average during all seasons. The air temperature variation corresponding with increased levels of PM_2.5 showed the same seasonal trend as that observed for PM₁₀. The relative humidity was higher than the respective seasonal averages in spring and summer, and lower in winter. The wind speed was lower than the seasonal average in both the cities. When the PM₁₀ and PM_2.5 levels increased, the wind direction was from the north and the west during the day and varied according to the season at night. The rate of the increase in the PM₁₀ concentration was the highest in both cities at the wind speed of 1.6 - 3.4 ms^-1 during the day and night except during night in the summer. The highest concentration of PM_2.5 was observed with the wind speed range of 1.6 - 3.4 ms^-1 in Jeju, and 0.3 - 1.6 ms^-1 in Seogwipo. The results of this study applied to urban and landscape planning will aid in the formulation of strategies to reduce the adverse effects of fine particular matter.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.234-243
• /
• 2000

This paper is to study population ecological characteristics, including growth parameters, survival rate, instantaneous coefficients of natural and fishing mortalities, and age at first capture of the soft-shelled clam, Mya japonioa in the intertidal zone of South Sea in Korea. For describing growth of the clam a von Bertalanffy growth model was adopted, The von Bertalanffy growth curve had an additive error structure and the growth parameters estimated from a non-linear regression were SH/sub ∞/=79.83mm, K=0.26, and t/sub 0/= -0.01. Survival rate (S) of the soft-shelled clam was 0.26 (SD=0.02). The instantaneous coefficients of natural mortality (M) was estimated to be 0.78/year and fishing mortality (F) 0.57/year for the soft-shelled clam. The age at first capture (t/sub c/) was estimated as 2.69 year. The mean densities of the soft-shelled clam by bottom type were 3.40 inds./m²(SE=0.18) in the sand, 63.4 inds./m²(SE= 0.53) in the muddy sand, and 0 inds./m2 (SE=0) in the gravelly sand. The mean densities of the soft-shelled clam by 3 different areas were 4.88 inds./m²(SE=0.09), 2.61 inds./m²(SE=0.13), 7.20 inds./m²(SE=0.18), respectively and the biomass of the clam were estimated as 131mt, 121mt, 665mt, respectively. An yield-per-recruit analysis showed that the current yield-per-recruit of about 8.30g with F=0.57/year and the age at first capture (t/sub c/) 2.69 year, was lower than the maximum possible yield-per-recruit of 9.60g. Fixing to at the current level and increased fishing intensity (F) could produce an increase in the predicted yield-per-recruit from 8.30g to about 9.40. However, estimated yield-per-recruit increased to 1.30g by decreasing to from the current age (2.69 year) to age two with F fixed at the current level. Yield-per-recruit was estimated under harvest strategies based on F/sub max/ and F/sub 0.1/.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.4
• /
• pp.324-333
• /
• 2019

Neutral genetic diversity found in plant species usually leaves an indelible footprint of historical events. Korea's main mountain range (referred to as the Baekdudaegan [BDDG]), is known to have served as a glacial refugium primarily for the boreal and temperate flora of northeastern Asia. In addition, life-history traits (life forms, geographic range, and breeding systems) influence the within- and among-population genetic diversity of seed plant species. For example, selfing species harbor significantly less within-population genetic variation than that of predominantly outcrossers. A previous study of two Liparis species (L. makinoana and L. kumokiri) emphasizes the role of the abovementioned factors shaping the levels of genetic diversity. Liparis makinoana, mainly occurring on the BDDG and self-incompatible, harbors high levels of within-population genetic diversity (expected heterozygosity, H_eP = 0.319), whereas there is no allozyme variation (H_eP = 0.000) in L. kumokiri, which is self-compatible and mainly occurs in lowland hilly areas. To determine if this trend is also found in other congeners, we sampled five populations of L. krameri from the southern part of the Korean Peninsula and investigated the allozyme-based genetic diversity at 15 putative loci. The somewhat intermediate levels of within-population genetic variation (H_eP = 0.145) found in L. krameri are most likely due to its occurrence in mountainous areas that, despite being outside of the main ridge of the BDDG, still served as refugia, and a self-incompatible breeding system. Management strategies are suggested for L. krameri and L. makinoana based on the levels and distribution of genetic diversity and inbreeding.

• Animal Bioscience
• /
• v.34 no.8
• /
• pp.1350-1364
• /
• 2021

Objective: Adequate vitamin and trace mineral intake for pigs are important to achieve satisfactory growth performance. There are no data available on the vitamin and trace mineral intake across pig producers in China. The purpose of this study was to investigate and describe the amount of vitamin and trace minerals used in Chinese pig diets. Methods: A 1-year survey of supplemented vitamin and trace minerals in pig diets was organized in China. A total of 69 producers were invited for the survey, which represents approximately 90% of the pig herd in China. Data were compiled by bodyweight stages to determine descriptive statistics. Nutrients were evaluated for vitamin A, vitamin D, vitamin E, vitamin K, thiamine, riboflavin, vitamin B₆, vitamin B₁₂, pantothenic acid, niacin, folic acid, biotin, choline, copper, iron, manganese, zinc, selenium, and iodine. Data were statistically analyzed by functions in Excel. Results: The results indicated variation for supplemented vitamin (vitamin A, vitamin D, vitamin E, vitamin K, vitamin B₁₂, pantothenic acid, niacin, and choline) and trace minerals (copper, manganese, zinc, and iodine) in pig diets, but most vitamins and trace minerals were included at concentrations far above the total dietary requirement estimates reported by the National Research Council and the China's Feeding Standard of Swine. Conclusion: The levels of vitamin and trace mineral used in China's pig industry vary widely. Adding a high concentration for vitamin and trace mineral appears to be common practice in pig diets. This investigation provides a reference for supplementation rates of the vitamins and trace minerals in the China's pig industry.

• Smart Structures and Systems
• /
• v.31 no.2
• /
• pp.101-111
• /
• 2023

Structural health monitoring (SHM) covers a range of damage detection strategies for buildings. In real-time, SHM provides a basis for rapid decision making to optimise the speed and economic efficiency of post-event response. Previous work introduced an SHM method based on identifying structural nonlinear hysteretic parameters and their evolution from structural force-deformation hysteresis loops in real-time. This research extends and generalises this method to investigate the impact of a wide range of flag-shaped or pinching shape nonlinear hysteretic response and its impact on the SHM accuracy. A particular focus is plastic stiffness (K_p), where accurate identification of this parameter enables accurate identification of net and total plastic deformation and plastic energy dissipated, all of which are directly related to damage and infrequently assessed in SHM. A sensitivity study using a realistic seismic case study with known ground truth values investigates the impact of hysteresis loop shape, as well as added noise, on SHM accuracy using a suite of 20 ground motions from the PEER database. Monte Carlo analysis over 22,000 simulations with different hysteresis loops and added noise resulted in absolute percentage identification error (median, (IQR)) in K_p of 1.88% (0.79, 4.94)%. Errors were larger where five events (Earthquakes #1, 6, 9, 14) have very large errors over 100% for resulted K_p as an almost entirely linear response yielded only negligible plastic response, increasing identification error. The sensitivity analysis shows accuracy is reduces to within 3% when plastic drift is induced. This method shows clear potential to provide accurate, real-time metrics of non-linear stiffness and deformation to assist rapid damage assessment and decision making, utilising algorithms significantly simpler than previous non-linear structural model-based parameter identification SHM methods.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.1989-1995
• /
• 2009

Efficient one-pot synthesis of arylmethylene bis(3-hydroxy-2-cyclohexene-1-ones) and xanthenediones by EDDA and In($OTf)_3$-catalyzed reactions was developed starting from dimedone and aryl aldehydes. The key strategies of these reactions involve domino Knoevenagel/Michael reaction or Koevenagel/Michael/Cyclodehydration reactions. The scope and limitation of the two catalysts under various reaction conditions were investigated and described.

• Mass Spectrometry Letters
• /
• v.6 no.2
• /
• pp.31-37
• /
• 2015

Phosphorylation upon protein is well known to a key regulator that implicates in modulating many cellular processes like growth, migration, and differentiation. Up to date, grafting of multidimensional separation techniques onto advanced mass spectrometry (MS) has emerged as a promising tool for figuring out the biological functions of phosphorylation in a cell. However, advanced MS-based phosphoproteomics is still challenging, due to its intrinsic issues, i.e., low stoichiometry, less susceptibility in positive ion mode, and low abundance in biological sample. To overcome these bottlenecks, diverse techniques (e.g., SCX, HILIC, ERLIC, IMAC, TiO₂, etc.) are continuously developed for on-/off-line enrichment of phosphorylated protein (or peptide) from biological samples, thereby helping qualitative/quantitative determination of phosphorylated protein and its phosphorylated sites. In this review, we introduce to the overall views of enrichment tools that are universally used to selectively isolate targeted phosphorylated protein (or peptide) from ordinary ones before MS-based phospoproteomic analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.396-402
• /
• 2010

In this paper the principles and structure of a WTS (Wind Turbine Simulator) are described. The proposed WTS is a versatile system specially designed for the purpose of developing and testing new control strategies for wind energy conversion systems. The simulator includes two sub-systems; a torque controller which controls a 3-phase induction motor in order to simulate the wind turbine and wind speed generator which can simulate an actual wind speed. In order to make the proposed system working in real-time, two sub-systems are incorporated into one simulink block by using Real-time workshop. The performance of the proposed system is verified by considering various wind speeds.

• Journal of ILASS-Korea
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2020

In the common rail fuel injection system, which is the core of diesel high efficiency and NO_X reduction, injection strategies such as high pressure injection of fuel, accurate injection rate control, and multistage injection are important to increase fuel atomization. In this study, the bypass type piezo injector for the electronic control based common rail injection system applied to diesel fuel vehicle was studied. In particular, the injection rate and internal fuel flow characteristics of the high-pressure injector according to the piezo stacking number and applied voltage were analyzed by theoretical numerical method. When the applied voltage changes, it is determined that additional fuel flow through the bypass compensates for the reduced valve driving force due to the change in the driving voltage.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.283-289
• /
• 2003

This paper proposes an expert system which can determine automatically the shunting routes corresponding to the given shunting works by considering totally the train operating environments in the station. The expert system proposes the multiple shunting routes with priority of selection based on heuristic search strategy. Accordingly, system operator can select a shunting route with the safety and efficiency among the those shunting routes. The expert system consists of a main inference engine and a sub inference engine. The main inference engine determines the shunting routes with selection priority using the segment routes obtained from the sub inference engine. The heuristic rules are extracted from operating knowledges of the veteran route operator and station topology. It is implemented in C computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique. And, the validity of the builted expert system is proved by a test case for the model station.