• Title/Summary/Keyword: Sub spatial

Search Result 797, Processing Time 0.036 seconds

Spatial Distributions of Alloying Elements Obtained from Atom Probe Tomography of the Amorphous Ribbon Fe75C11Si2B8Cr4

  • Shin, Jinkyung;Yi, Seonghoon;Pradeep, Konda Gokuldoss;Choi, Pyuck-Pa;Raabe, Dierk
    • Korean Journal of Materials Research
    • /
    • v.23 no.3
    • /
    • pp.190-193
    • /
    • 2013
  • Spatial distributions of alloying elements of an Fe-based amorphous ribbon with a nominal composition of $Fe_{75}C_{11}Si_2B_8Cr_4$ were analyzed through the atom probe tomography method. The amorphous ribbon was prepared through the melt spinning method. The macroscopic amorphous natures were confirmed using an X-ray diffractometer (XRD) and a differential scanning calorimeter (DSC). Atom Probe (Cameca LEAP 3000X HR) analyses were carried out in pulsed voltage mode at a specimen base temperature of about 60 K, a pulse to base voltage ratio of 15 %, and a pulse frequency of 200 kHz. The target detection rate was set to 5 ions per 1000 pulses. Based on a statistical analyses of the data obtained from the volume of $59{\times}59{\times}33nm^3$, homogeneous distributions of alloying elements in nano-scales were concluded. Even with high carbon and strong carbide forming element contents, nano-scale segregation zones of alloying elements were not detected within the Fe-based amorphous ribbon. However, the existence of small sub-nanometer scale clusters due to short range ordering cannot be completely excluded.

Modified Weighted Filter Algorithm for Noise Elimination In Mixed Noise Environments

  • Gao, Yinyu;Kim, Nam-Ho
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.13 no.2
    • /
    • pp.63-69
    • /
    • 2012
  • Noise is regarded as an unwanted component of the image because it significantly reduces image quality. And image is often corrupted by mixed noise. In this paper an efficient modified weighted filter algorithm which combines spatial weight and intensity weight is proposed for removing mixed noise. In the proposed method, the filtering mask is separated into the four sub-windows and the parameters of the weights are confirmed by calculating local standard deviation and the mean of four sub-windows' standard deviations. Considering the spatial information and intensity information, the proposed method has good performance on not only noise elimination but also preservation of details. Simulation results demonstrate that the proposed method performs better than conventional algorithms.

THE APPLICATION OF GIS FOR EFFECTIVE DISTRIBUTION OF THE EMERGENCY MEDICAL SERVICE AREA

  • Yang Byung-Yun;Hwang Chul-Sue
    • Proceedings of the KSRS Conference
    • /
    • 2005.10a
    • /
    • pp.61-64
    • /
    • 2005
  • The purpose of this paper is to take a closer look at an area having shorted emergence facilities and to determine optional candidate sites instead of vulnerable area by using GIS spatial analysis. Newly determined new candidate is performed by concerning spatial efficiency and spatial equity for a public service. It was determined through using the analyzing of the physical accessibility measure, the Location-Allocation, sort of classic model in spatial statistics and general network analysis. The area of this research has been used in administrative boundary of Young-Dong in Gangneung including 13 emergency, medical hospitals, 46 fire-stations and sub-fire stations. In general terms, what all this show is that the way we are approached for geographical view from using GIS spatial analyzing technique of determined location and allocation problem by the social, economical, political factor and simple administrative discrimination at the meantime. At the same time, with problem occurred in the space it is possible to make an Effective proposal or means, policy, decision for new candidate location-allocation suggesting optimum model.

  • PDF

A Study on the Simulation of Daily Precipitation Considering Spatial Probability Characteristics (공간적(空間的) 확률구조(確率構造)를 고려(考慮)한 일강수량(日降水量)의 모의발생(模擬發生)에 관한 연구(硏究))

  • Lee, Jae Joon;Lee, Won Hwan
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.6 no.3
    • /
    • pp.31-42
    • /
    • 1986
  • The probabilistic model was developed to give a spatial simlation of precipitation series to solve the problem of future need of water resources. The simulation of daily precipitation series at the sub-base stations was induced from the spatial structure of rainfall occurrence probability between the base station and the sub-base stations in the watershed. In this study Hadong was chosen as the base station in Seomjin river basin and Imsil, Boseong, Soonchang, Dongbok, and Gurye were also selected as the sub-base stations. The results of this study are as follows; 1) The separation technique of spatial precipitation state showed effectiveness in the spatial simulation method because the occurrence probability by each precipitation state (Wet-Wet, Dry-Wet, Wet-Dry, and Dry- Dry system) represented the stable value. 2) The daily precipitation series of the sub-base stations which were simulated from those of the base station showed that the simulated annual mean precipitations were similar to the observed data, but the precipitations in summer were decreased slightly. 3) The correlogram and power spectrum of the simulated monthly precipitation for the sub-base stations showed those of the observed sample with good agreement.

  • PDF

Analysis of Thermal Environment Characteristics by Spatial Type using UAV and ENVI-met (UAV와 ENVI-met을 활용한 공간 유형별 열환경 특성 분석)

  • KIM, Seoung-Hyeon;PARK, Kyung-Hun;LEE, Su-Ah;SONG, Bong-Geun
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.25 no.1
    • /
    • pp.28-43
    • /
    • 2022
  • This study classified UAV image-based physical spatial types for parks in urban areas of Changwon City and analyzed thermal comfort characteristics according to physical spatial types by comparing them with ENVI-met thermal comfort results. Physical spatial types were classified into four types according to UAV-based NDVI and SVF characteristics. As a result of ENVI-met thermal comfort, the TMRT difference between the tree-dense area and other areas was up to 30℃ or more, and it was 19. 6℃ at 16:00, which was the largest during the afternoon. As a result of analyzing UAV-based physical spatial types and thermal comfort characteristics by time period, it was confirmed that the physical spatial types with high NDVI and high SVF showed a similar to thermal comfort change patterns by time when using UAV, and the physical spatial types with dense trees and artificial structures showed a low correlation to thermal comfort change patterns by time when using UAV. In conclusion, the possibility of identifying the distribution of thermal comfort based on UAV images was confirmed for the spatial type consisting of open and vegetation, and the area adjacent to the trees was found to be more thermally pleasant than the open area. Therefore, in the urban planning stage, it is necessary to create an open space in consideration of natural covering materials such as grass and trees, and when using artificial covering materials, it is judged that spatial planning should be done considering the proximity to trees and buildings. In the future, it is judged that it will be possible to quickly and accurately identify urban climate phenomena and establish urban planning considering thermal comfort through ground LIDAR and In-situ measurement-based UAV image correction.

A Study on the Characteristics of Dynamic Behaviors for the Spatial Structures using Equivalent Lumped Mass Model (중간 면진층을 가지는 래티스 돔 구조물의 병렬 다질점계 등가모델을 이용한 동적 거동 특성에 관한 연구)

  • Han Sang-Eul;Lee Sang-Ju;Kim Min-Sik
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.19 no.2 s.72
    • /
    • pp.187-194
    • /
    • 2006
  • Generally, earthquake-resistant structural systems have to ensure the sufficient stiffness and ductility for stability In this paper, the spatial structures are applied an isolation system to boundary parts between roof systems and sub-structures. So, it is necessary to examine the characteristics of dynamic behaviors of spatial structures governed by higher modes rather than lower modes different from the cases of high-rise buildings. The objectives of this paper are to develop the equivalent lumped mass model to simplify an analytical processes and to investigate the dynamic behaviors of roof systems according to the mass and stiffness of sub-structures as a fundamental study of performance design for the spatial structures.

Spatial target path following and coordinated control of multiple UUVs

  • Qi, Xue;Xiang, Peng;Cai, Zhi-jun
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.12 no.1
    • /
    • pp.832-842
    • /
    • 2020
  • The coordination control of multiple Underactuated Underwater Vehicles (UUVs) moving in three dimensional space is investigated in this paper. The coordinated path following control task is decomposed into two sub tasks, that is, path following control and coordination control. In the spatial curve path following control task, path following error dynamics is build in the Serret-Frenet coordinate frame. The virtual reference object can be chosen freely on the desired spatial path. Considering the speed of the UUV, the line-of-sight navigation is introduced to help the path following errors quickly converge to zero. In the coordination control sub task, the communication topology of multiple UUVs is described by the graph theory. The speed of each UUV is adjusted to achieve the coordination. The path following system and the coordination control system are viewed as the feedback connection system. Input-to-state stable of the coordinated path following system can be proved by small gain theorem. The simulation experiments can further demonstrate the good performance of the control method.

Investigation of SO2 effect on OMI-TOMS and OMI-DOAS O3 in volcanic areas with OMI satellite data (OMI 위성자료를 이용한 화산지역 고농도 이산화황 환경에서의 TOMS 오존과 DOAS 오존의 비교연구)

  • Choi, Wonei;Hong, Hyunkee;Park, Junsung;Kim, Daewon;Yeo, Jaeho;Lee, Hanlim
    • Korean Journal of Remote Sensing
    • /
    • v.31 no.6
    • /
    • pp.599-608
    • /
    • 2015
  • In this present study, we quantified the $SO_2$ effect on $O_3$ retrieval from the Ozone Monitoring Instrument (OMI) measurement. The difference between OMI-Total Ozone Mapping Spectrometer (TOMS) and OMI-Differential Optical Absorption Spectrometer (DOAS) total $O_3$ is calculated in high $SO_2$ volcanic plume on several volcanic eruptions (Anatahan, La Cumbre, Sierra Negra, and Piton) from 2005 through 2008. There is a certain correlation ($R{\geq}0.5$) between the difference and $OMI-SO_2$ in volcanic plumes and the significant difference close to 100 DU. The high $SO_2$ condition found to affect TOMS $O_3$ retrieval significantly due to a strong $SO_2$ absorption at the TOMS $O_3$ retrieval wavelengths. Besides, we calculated the difference against various $SO_2$ levels. There is the considerable difference (average = 32.9 DU; standard deviation = 13.5 DU) in the high $OMI-SO_2$ condition ($OMI-SO_2{\geq}7.0DU$). We also found that the rate of change in the difference per 1.0 DU change in middle troposphere (TRM) and upper troposphere and stratosphere (STL) $SO_2$ columns are 3.9 DU and 4.9 DU, respectively.

Evaluation of Retrieval Accuracy of NO2 Column Density from Pandora Raw Data According to Wavelength Range and Absorption Cross-section Using DOAS Method (Pandora 원시자료로부터 차등흡수분광법을 이용하여 이산화질소 칼럼 농도 산출 시 파장 구간 및 흡수단면적에 따른 산출 정확도 평가)

  • Kim, Serin;Kim, Daewon;Lee, Hanlim
    • Korean Journal of Remote Sensing
    • /
    • v.38 no.2
    • /
    • pp.215-222
    • /
    • 2022
  • In this study, the effect of wavelength range and absorption cross-section used to retrieve nitrogen dioxide (NO2) vertical column density (VCD) from Pandora was analyzed using Differential Optical Absorption Spectroscopy (DOAS). During the GEMS Map of the Air Pollution (GMAP) 2020 campaign, data from direct sunlight observation with Pandora instrument in Seosan was used, and NO2 VCD was retrieved under four conditions. The average NO2 VCD under the four conditions ranged from 1.22×1016~1.38×1016 molec. cm-2, with a maximum difference of 0.16×1016 molec. cm-2 between each condition. The fitting error averaged 3.19~9.59%, showing an error within 10% in all cases, and the RMS was 5.11×10-3~7.16×10-3 molec. cm-2. The retrieved NO2 VCD using 4 conditions shows a slope in the range of 0.98 to 1.09 and correlation of 0.96 to 0.98 in comparison with Pandonia Global Network (PGN).

The Effects of 4D-Frame Teaching upon Mathematically Gifted Elementary Students' Mathematical Creativity and Spatial Sense (4D 프레임 활용 학습이 초등 수학영재학생의 공간감각 및 수학적 창의성에 미치는 영향)

  • Lee, Ju Yong;Choi, Jae Ho
    • Education of Primary School Mathematics
    • /
    • v.16 no.1
    • /
    • pp.1-20
    • /
    • 2013
  • The aim of this study was to develop a gifted educational program in math-gifted class in elementary school using recently developed 4D-frame. This study identified how this program impacted on spatial sense and mathematical creativity for mathematically gifted students. The investigation attempted to contribute to the developments for the gifted educational program. To achieve the aim, the study analysed the 5 and 6th graders' figure learning contents from a revised version of the 2007 national curriculum. According to this analysis, twelve learning sections were developed on the basis of 4D-frame in the math-gifted educational program. The results of the study is as follows. First, a learning program using 4D-frame for spatial sense from mathematically gifted elementary school students was statistically significant. A sub-factor of spatial visualization called mental rotation and sub-factors of spatial orientations such as sense of distance and sense of spatial perception were statistically significant. Second, the learning program that uses 4D-frame for mathematical creativity was statistically significant. The sub-factors of mathematical creativity such as fluency, flexibility and originality were all statistically significant. Third, the manipulation properties of 4D-frame helped to understand the characteristics of various solid figures. Through the math discussions in the class, participants' error correction was promoted. The advantage of 4D-frame including easier manipulation helped participants' originality for their own sculpture. In summary, this found that the learning program using 4D-frame attributed to improve the spatial sense and mathematical creativity for mathematically gifted students in elementary school. These results indicated that the writers' learning program will help to develop the programs for the gifted education program in the future.