• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.553-559
• /
• 2010

The paper describes the preparation and characterization of conductive polyaniline-modified polymers by growing of aniline onto functionalized poly(styrene-co-p-methylstyrene) [P(St-co-MSt)]. For this purpose, P(St-co-MSt) was synthesized via nitroxide mediated radical polymerization (NMRP) and then N-boromosuccinimide was used for introduction of bromine to the benzylic positions of copolymer. Afterwards, 1,4-phenylenediamine was linked to the brominated P(St-co-MSt) and functionalized copolymer $[P(St-co-MSt)-NH_2]$ was prepared. The graft copolymerization of aniline monomers onto functionalized P(St-co-MSt) was initiated by oxidized phenylamine groups after addition of ammonium peroxydisulfate (APS), and p-toluenesulfonic acid-doped PANI was chemically grafted onto P(St-co-MSt) via oxidation polymerization. The obtained terpolymer was studied by FTIR and UV-Vis spectroscopy and its thermal behaviour were examined by DSC and TGA analyses. The conductivity of terpolymer was measured by four-point probe method and electroactivity was measured by cyclic voltammetry (CV). The solubility of P(St-co-MSt)-g-PANI was examined in common organic solvents.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.398-400
• /
• 1995

Selective oxidation of cyclohexane in acetone solution has been studied using iron catalysts with hydrogen peroxide in-situ produced by palladium catalyst. Iron tetraphenylporphyrin chloride shows the highest activity among the tested chlorides and porphyrin complexes of some metals of the first transiton series. Iron chloride and iron tetraphenylporphyrin chloride were supported on four kinds of 4-vinylpyridine copolymer with styrene or divinyl-benzene. Nitrogen 1s photoelectron spectra give the evidence that pyridyl nitrogens of the 4-vinyl pyridine copolymer act as ligands to bind iron species. The copolymer with styrene is the most efficient support for the binding because its solubility in catalyst preparation solvent (methylene chloride) gives the pyridyl group advantage to contact with the iron catalysts. However, better catalytic activity per iron atom could be obtained with a rigid crosslinked polymer due to active site isolation.

• Korean Journal of Materials Research
• /
• v.25 no.12
• /
• pp.719-726
• /
• 2015

For a decade, solution-processed functional materials and various printing technologies have attracted increasingly the significant interest in realizing low-cost flexible electronics. In this study, Cu nanoparticles are synthesized via the chemical reduction of Cu ions under inert atmosphere. To prevent interparticle agglomeration and surface oxidation, oleic acid is incorporated as a surface capping molecule and hydrazine is used as a reducing agent. To endow water-compatibility, the surface of synthesized Cu nanoparticles is modified by a mixture of carboxyl-terminated anionic polyelectrolyte and polyoxylethylene oleylamine ether. For reducing the surface tension and the evaporation rate of aqueous Cu nanoparticle inks, the solvent composition of Cu nanoparticle ink is designed as DI water:2-methoxy ethanol:glycerol:ethylene glycol = 50:20:5:25 wt%. The effects of poly(styrene-co-maleic acid) as an adhesion promoter(AP) on rheology of aqueous Cu nanoparticle inks and adhesion of Cu pattern printed on polyimid films are investigated. The 40 wt% aqueous Cu nanoparticle inks with 0.5 wt% of Poly(styrene-co-maleic acid) show the "Newtonian flow" and has a low viscosity under $10mPa{\cdots}S$, which is applicable to inkjet printing. The Cu patterns with a linewidth of $50{\sim}60{\mu}m$ are successfully fabricated. With the addition of Poly(styrene-co-maleic acid), the adhesion of printed Cu patterns on polyimid films is superior to those of patterns prepared from Poly(styrene-co-maleic acid)-free inks. The resistivities of Cu films are measured to be $10{\sim}15{\mu}{\Omega}{\cdot}cm$ at annealing temperature of $300^{\circ}C$.

• Analytical Science and Technology
• /
• v.26 no.1
• /
• pp.42-50
• /
• 2013

This paper describes the electrocatalytic activity for the oxidation of small biomolecules on the surface of Pt-Ru nanoparticles supported by $TiO_2$-hollow sphere prepared for use in sensor applications or fuel cells. The $TiO_2$-hollow sphere supports were first prepared by sol-gel reaction of titanium tetraisopropoxide with poly(styrene-co-vinylphenylboronic acid), PSB used as a template. Pt-Ru nanoparticles were then deposited by chemical reduction of the $Pt^{4+}$ and $Ru^{3+}$ ions onto $TiO_2$-hollow sphere ($Pt-Ru@TiO_2-H$). The prepared $Pt-Ru@TiO_2-H$ nanocomposites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and elemental analysis. The electrocatalytic efficiency of Pt-Ru nanoparticles was evaluated via ethanol, methanol, dopamine, ascorbic acid, formalin, and glucose oxidation. The cyclic voltammograms (CV) obtained during the oxidation studies revealed that the $Pt-Ru@TiO_2-H$ nanocomposites showed high electrocatalytic activity for the oxidation of biomolecules. As a result, the prepared Pt-Ru catalysts doped onto $TiO_2$-H sphere nanocomposites supports can be used for non-enzymatic biosensor or fuel cell anode electrode.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.643-649
• /
• 2011

Degradation of benzothiophene(BT) in the aqueous phase by potassium ferrate(VI) was investigated. Potassium ferrate(VI) was prepared by the wet oxidation method. The degradation efficiency of BT was measured at various values of pH, ferrate(VI) dosage and initial concentration of BT. BT was degraded rapidly within 30 seconds by ferrate(VI). While the highest degradation efficiency was achieved at pH 5, the lowest degradation efficiency was achieved at pH 9. Also, the initial rate constant of BT increased with decreasing of the BT initial concentration. In addition, the intermediate analysis for the reaction of BT and ferrate(VI) has been conducted using GC-MS. Benzene, styrene, benzaldehyde, formaldehyde, benzoic acid, formic acid, and acetic acid were identified as reaction intermediates, and ${SO_4}^{2-}$ was identified as an end product.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.682-686
• /
• 1993

The syntheses and reactivities with olefins of $[Ru^{II}(L_3)(L_2)OH_2]^{2+}$ $[L_3$= 2,6-bis(N-pyrazolyl)pyridine(bpp), 2,6-bis(3,5-dimethyl-N-pyrazolyl)pyridine $(Me_4bpp);\;L_2$= 2,2'-bipyridine(bpy), 4,4'-dimethyl-2,2'-bipyridine $(Me_2bpy)$] are described. Their spectral and redox properties in aqueous solution were investigated. Evidence for each one electron redox process for the $Ru^{IV}-Ru^{III}$ and $Ru^{III}-Ru^{II}$ couples has been obtained. Oxidation of $[Ru^{II}(bpp)(bpy)OH_2]^{2+}$ with $Ce^{IV}$ gave $[Ru^{IV}(bpp)(bpy)O]^{2+}$. The $[Ru^{IV}$= 0 complex is paramagnetic $({\mu}_{eff}=2.82)$ and the complexes $[Ru(L_3)(L_2)OH_2]^{2+}$ are robust catalysts for the oxidation of styrene, cyclohexene, and cyclooctene with cooxidant such as NaOCl. Product distributions and selectivities are discussed by varying the number of the substituted-methyl group in the ring.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.53-59
• /
• 2006

.FAPO-5 molecular sieves were synthesized starting from the same reactant gel at 170 oC using microwave irradiation technique and conventional hydrothermal reaction. The FAPO-5 molecular sieves were characterized by several techniques such as SEM, FTIR, UV/Vis, and ESR. Moreover, the oxidation of styrene over FAPO-5s was carried out, and compared to check the oxidation and epoxidation ability of the two FAPO-5s. FAPO-5 can be obtained easily by microwave irradiation within 15 min at 170oC, whereas FAPO-5 synthesis is completed in 6 h by conventional electric heating, confirming the acceleration about 20 times by microwave technique. There are no appreciable differences between two FAPO-5s in surface area and coordination state of iron. The FAPO-5 synthesized by microwave irradiation shows higher epoxide selectivity in the styrene epoxidation, which may be explained by the higher hydrophobicity of the catalyst.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.15-24
• /
• 2004

Oxidation causes increment of the quantity of large molecular size or LMS in asphalt and is a major reason for hardening of asphalt binder. An extended service life of pavement on a road is expected by reducing oxidation of binder. Oxidation of binder occurs during hot mixing with aggregates before placement on road and then during in-service after the asphalt pavement is constructed. Quantitative increase of LMS as result of aging after RTFO and PAV was analyzed based on the data from high-pressure gel-permeation chromatography (HP-GPC). Polymer modified asphalt (PMA) after RTFO procedure showed 20-30% increment in LMS and then after PAV procedure more than twice, although the percentage of increment was different according to asphalt brand and grade. The PMAs containing LDPE or SBS, which showed a great mechanical property improvement in previous studies, were selected for characterizing PMA aging In this study. Considerably reduced increment of LMS was observed from the PMA containing LDPE after RTFO and PAV procedures. The GPC result showing the binder with less LMS increment means that the asphalt while being mixed with LDPE was aged less during the aging treatment. The dispersed particle of LDPE in asphalt cement seems to disturb oxidative aging reaction and evaporation.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.295-301
• /
• 1994

The Ru(Ⅲ), Ni(Ⅱ), Cu(Ⅱ), and Pd(Ⅱ) complexes of N$_4$-polydentate ligands(meso-Me$_6$-[14]-ane, rac-Me$_6$-[14]-ane, and cyclam) have been prepared and their catalytic activity and selectivity in the oxidation of olefins in the presence of oxidant such as NaOCl, H$_2$O$_2$, t-BuOOH, and PhIO studied. The oxidations of cyclohexene, 1-hexene, cyclooctene, 1-octene, and styrene as substrates have been investigated gas chromatographically. The Ru(Ⅲ)-N$_4$ complexes showed high selectivity for epoxide in the catalyzed oxidation of olefins with NaOCl. The catalytic activities of Ru(Ⅲ)-N$_4$ complexes were discussed in terms of the flexibility of N$_4$-polydentate ligands, the Ru(Ⅲ)-Cl bond interaction and the steric effect of oxidants. The oxidation of 1-octene using PhIO as oxidant was carried out to verify. The Pd(Ⅱ) complex turned out to be more active catalyst than the Ni(Ⅱ) complexes.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.83-84
• /
• 2006

In aqueous phase, we directly prepared conducting and photoluminescent nano-structured particles by oxidation polymerization. Thiophene(PT) was initiated by $FeCl_{3}/H_{2}O_{2}$ (catalyst/oxidant) combination system. And, polydispersed core-shell poly(styrene/thiophene) and polyaniline(PANI)-coated multi core-shell polystyrene latex particles were successfully prepared by oxidative and radical polymerization. The resulting latex particles have fine improved luminescence and conductive efficiency and dispersion state due to the PT and PANI shell. Hyper functionalized nanoparticle would be expected to increase the processibility in various electrical and electro-optical fields.