• 제목/요약/키워드: Stuff

검색결과 194건 처리시간 0.026초

안나토 추출액을 이용한 견직물의 염색성 (The Dyeability of Silk Fabrics with Annatto Extract)

  • 한미란;조원주;이정숙
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2008년도 제38차 학술발표대회
    • /
    • pp.117-119
    • /
    • 2008
  • This study was investigated for the dyeing properties of silk fabrics with Annatto Extract. The dye stuff was extracted by distilled water at 60$^{\circ}C$, 10minutes, 100:1 of bath ratio. The highest K/S value was showed at 25% dye concentration, 60minutes of dyed time at 50$^{\circ}C$ in the temperature. The post mordant conditions were better than that of pre mordant, especially post-Fe mordant showed highest K/S value. The laundering fastness was relatively good by Cu-mordant. Drying cleaning fastness appeared 4-5 grades.

  • PDF

Development of a Frame Buffer Driver for Embedded Linux Graphic System

  • Kim, Ga-Gue;Kang, Woo-Chul;Jung, Young-Jun;Lee, Hyung-Seok
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.2116-2120
    • /
    • 2003
  • A frame buffer device is an abstraction for the graphic hardware. It allows application software to access the graphic hardware through a well-defined interface, so that the software doesn’t need to know anything about the low-level interface stuff. We develop a frame buffer driver for VIA’s CLE266 graphic system based on ‘Qplus’, an embedded linux operating system developed by ETRI. Then, it will be seen that our frame buffer system is applied to embedded solutions such as movie player and X server successfully.

  • PDF

지르코늄 코팅공구의 절삭특성 (Cutting Characteristics of the ZrN Coated Tool)

  • 설한욱;김주현
    • 한국공작기계학회논문집
    • /
    • 제15권1호
    • /
    • pp.17-22
    • /
    • 2006
  • Zirconium is widely applied in industrial area. In this study, the exeperiments are performed to investigate the differences in cutting characteristics of zirconium coated material which deposited on cutting tool using physical vapor deposition(PVD). For comparison, TiN coated tool is used to compare with zirconium coated tool. Experimental results were compared for tool wear, surface roughness and cutting force. The tool wear of PVD coated bites is affected by the various cutting conditions. This new stuff 'zirconium coated tool' wears $33\%$ less and improves surface roughness $23\%$ more in various cutting conditions. Cutting force is analyzed by using various workpiece, and the research strongly confirms that 'zirconium' remains better condition than 'titanium'. As a result 'zirconium' coated tool can be performed far better than 'titanium' coated tool on metal cutting.

스기모토 타카시의 디자인에 나타나는 흔적의 의미에 관한 연구 (A Study on the Meaning of Trace in Sugimoto Takashi's Design)

  • 서정연
    • 한국가구학회지
    • /
    • 제26권1호
    • /
    • pp.51-60
    • /
    • 2015
  • Interior designer Sugimoto Takashi uses salvaged material and natural thing for aesthetical purpose. These material performs not just as fun stuff but as design tool in order to set up cultural meaning which modern society always lacks for. The method of communicating the meaning is the multi-layered trace on them. There are three types of trace. They are harsh texture of surface, untrimmed outline, and gathering & arrangement. Through these formation methods of trace, Sugimoto can suggest various curtural meanings such as vanishing value of old-fashioned lifestyle, primitive energy of nature, and sincere touch of somebody. As a result, the trace in Sugimoto's design is an endeavor to exist tradition(the long ago) and nature(the far away) in here-and-now interior space.

해부학 기반의 3차원 얼굴 모델링을 이용한 얼굴 표정 애니메이션 (facial Expression Animation Using 3D Face Modelling of Anatomy Base)

  • 김형균;오무송
    • 한국정보통신학회논문지
    • /
    • 제7권2호
    • /
    • pp.328-333
    • /
    • 2003
  • 본 논문에서는 얼굴의 표정 변화에 영향을 주는 해부학에 기반한 18개의 근육군쌍을 바탕으로 하여 얼굴 표정 애니메이션을 위한 근육의 움직임을 조합할 수 있도록 하였다. 개인의 이미지에 맞춰 메쉬를 변형하여 표준 모델을 만든 다음, 사실감을 높이기 위해 개인 얼굴의 정면과 측면 2장의 이미지를 이용하여 메쉬에 매핑하였다. 얼굴의 표정 생성을 애니메이션 할 수 있는 원동력이 되는 근육 모델은 Waters의 근육모델을 수정하여 사용하였다. 이러한 방법을 사용하여 텍스처가 입혀진 변형된 얼굴을 생성하였다. 또한, Ekman이 제안한 6가지 얼굴 표정을 애니메이션 하였다.

후두개절제환자에서 시술한 인두위문합술 -1예 보고- (Pharyngogastrostomy in an Epiglottectomized Patient -A Case Report-)

  • 송요준;김종환
    • Journal of Chest Surgery
    • /
    • 제7권2호
    • /
    • pp.175-178
    • /
    • 1974
  • The patient was 21-year old male who had gastrostomy and tracheostomy after swallowing lye-stuff in July 1971. He could restore his normal voice and breathing after removal of his destructed epiglottis obstructing his upper airway two years later. Pharyngogastrostomy was performed in Nov 1973. The esophagus which was totally obliterated in its full length was removed and the stomach was brought high up to the level of pharynx where it was anastomosed to the posterior wall of pharynx. His postoperative course was temporarily complicated by aspiration of small food into trachea which could be completely relieved with training, and he is doing his normal life quite well on the follow-up.

  • PDF

Mapping을 위한 자율이동로붓의 Wall Following 기법 (A Wall-Following Method of Mobile Robot for Mapping)

  • 이강민;임동균;김경근;서병설
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.102-105
    • /
    • 2005
  • A Effective wall following plays important role for the mapping behaviors which determine the entire memory size and the shape of map before building a map. In case of wall following, attacking those cause by curved wall or obstacles brings a bad stuff that makes ripples on the moving trajectory. These types of ripples come to an end with problems that increase the load of calculation and sensing errors. In this paper, a new sensing method and its corresponding controller are suggested for problems. It minimizes the occurrence of the trajectory ripples.

  • PDF

구운 검은콩 분말을 첨가한 스펀지 케이크의 품질 특성 (Quality Characteristics of Sponge Cake with Added Baked Black Soybean Powder)

  • 정현철
    • 동아시아식생활학회지
    • /
    • 제22권3호
    • /
    • pp.401-407
    • /
    • 2012
  • Baked black soybean has great nutritional value, so it is a great potential ingredient in cake. To find an acceptable ingredient ratio, baked black soybean powder was to wheat flour in different experimental groups. The control was pure wheat flour, and the experimental groups had 0 (control), 10%, 20%, 30%, and 40% baked black soybean powder added. The baked black soybean powder consists of moisture (4.88%), crude protein (34.46%), crude fat (11.35%), crude ash (4.84%), and carbohydrates (44.47%). The specific gravity, spreadability, and baking loss increased with an increase in the amount of baked black soybean powder, but specific volume decreased. The 'L' and 'b' chromaticity values of a sponge cake decrease with increased amounts of added baked black soybean powder. The texture becomes more hard and stuff with added baked black soybean powder, but springiness decreases. A sensory test found the best experimental group to be that of 20% powder added.

콩잎에 대한 문헌적 고찰 (A Bibliographical Analysis on Bean sprouts)

  • 이선아;박상영;안상우
    • 한국의사학회지
    • /
    • 제21권1호
    • /
    • pp.109-115
    • /
    • 2008
  • Bean sprouts have been one of the vital food for our ancestor for a long time. They were also hardy wild plants or first-aid medicine for needy people. Even nowadays they are served at table. For examples, bean curd, bean-curd dregs, bean sprouts, soybean paste, fermented soybeans, hot pepper paste, and soy are our daily food. Moreover bean sprouts are widely favored at the age of the well-being. Bean sprouts for a recover from a hangover, soybean paste for the prevention of cancer, beans leaf as the best well-being food for a diet, and so on. Thus the paper explains the origin of bean sprouts and their application as a food or medicinal stuff with the analysis of the various and wide-spread records.

  • PDF

쑥 메탄올 추출물의 염색성 및 항균성 (The Dyeability and Antimicrobial Activity of Methanol Extracted in Artemisia princeps)

  • 김병희;송화순
    • 한국의류산업학회지
    • /
    • 제1권4호
    • /
    • pp.363-369
    • /
    • 1999
  • Artemisia princeps was used for the natural dye stuff extraction and concentration to produce the condensed dye liquid. Using this liquid, the silk and the cotton fabrics were dyed. And then the K/S value, color difference were measured in order to determine the dyeability and the antimicrobial activity. The K/S value of silk were much higher than those of cotton. In terms of the silk fabric, the premordanting method was most efficient of the mordanting method. The various surface colors on the dyed fabric were resulted according to used mordants and mordanting methods. The dye fastness was significantly improved when mordants were added. Among them, Cr-mordant improved more than 1 level. The Cu-mordant showed the greatest antimicrobial activity on both of mordant treated silk and cotton.

  • PDF