• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.225-232
• /
• 2017

Leaning-type arch bridge is a new spatial structural system composed of two vertical arches and two leaning arches. So far there has been no contrast analysis of leaning type arch bridge with different systems. This paper focus on a parametric study of leaning type arch bridge with different systems to find the influential rules on structural forces and stability and to provide some reference for practical designs. The parametric analysis is conducted with different rise-to-span ratios and bending rigidities of arch ribs by comparing internal forces. The internal forces decline obviously with the increase of the rise-to-span ratio. The bending moments at the centers of the main arches and the leaning arches are sensitive to the bending rigidities of arch ribs. Parametric studies are also carried out with different structural systems and leaning angles of the leaning arch by comparing the static stability. The lateral stiffness of leaning-type arch bridge is less than the in-plan stiffness. Compared with the leaning-type arch bridge without thrust, the leaning-type arch bridge with thrust has a lower stability safety coefficient. The stability safety coefficient rises gradually with the increase of inclining angle of the leaning arch. This study shows that the rise-to-span ratio, bending rigidities of arch ribs, structural system and leaning angles of the leaning arch are all critical design parameters. Therefore, these parameters in unreasonable range should be avoided.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.757-768
• /
• 2004

This study was aimed to provide the fundamental and various measurement data of the head and face for Korean children. Two hundred sixty nine female children, aged nine to twelve years, participated for this study. The 28 regions on the head and face of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed' using these data. Through factor analysis, six factors were extracted upon factor scores and those factors comprised 71.42% for the total variances. Four clusters as their head and face shape were categorized using six factor scores by cluster analysis. Type 1 was characterized by the shorter head & face length and width and the lowest position from forehead to nose. Type 2 had the longer head & face length and width and the highest ear position and the largest mouse width. Type 3 was characterized by the longest and head & face type and the widest head & face girth. Type 4 was characterized by shortest head & face length the lower ear and lips position.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.220-224
• /
• 2009

The authors have investigated the acoustic field analysis using the Constrained Interpolation Profile(CIP) Method recently proposed by Yabe. The present study has examined the calculation accuracy of the three-dimensional (3-D) acoustic field analysis using the type-M CIP method. In this paper we show phase error of type-M CIP method and the dependence on the wave-propagation direction in the type-M CIP acoustic field analysis, and then demonstrate that it is effective for acoustic field analysis, compared with the FDTD and the exact solution. We show the dependency on the propagation angle in the CIP acoustic field analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.80-87
• /
• 2006

Seals are usually made from elastomer, a kind of rubber, and it has the non-linearity and hyper-elasticity. U-type seals are used to prevent the leakage of internal fluid sealed in hydraulic actuator because they have more excellent performance than O-rings or rectangular seals. As a core part of hydraulic actuator, U-type seal gives much effect on performance and reliability of actuator. This study considers an NBR U-type seal under high pressure of a hydraulic actuator, and provides its deformation, stress-strain characteristic and contact force using the non-linear finite element analysis. Analysis results are compared with the experimental ones performed by the self-developed testing equipment. Verification result shows that this study presents a good application process for the effective design of U-type seals under high operation pressure.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.165-172
• /
• 2007

The purpose of this study was to examine the effects of the result of hardship performance of the propulsion speed on the flying carmel spins during a Figure Skating. The subjects were five the korea national representative players. Kinematic variables were analyzed 5frame of the excursion phase by the three-dimensional motion analysis system(60Hz). The obtained conclusion were as follows: In this study, during the propulsion classify two groups as "type I" the acceleration patterns S3, S4 and "type II" the uniform velocity group S1, S2, S5. The results of percentage comparative analysis between type I and type II can be summarized as below: the height of jump(24%), the height of COM(25%), the maximum speed of Roundhouse Kick(21%), the judging technical score(18%), the flight time(13%), the velocity of spins(4%), the distance of flight(-6%) Analysis of the results on performance variables, the velocity pattern of the type I showed comparatively excellence than that of type II.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.45-50
• /
• 2014

This study focuses on the analysis of the cooling and heating load in accordance with apartment houses arrangement type using Ecotect Analysis. Korea have to reduce energy consumption part of building except in industry and transport because the rate of dependence on imports amounts to 94%, Apartment houses built in various forms in order to reduce energy are modelled in each window area ratio, shape, orientation, and climate through simulation. Through this study, we can analyze the cooling and heating load by form, window area ratio, orientation, and climate change and know the optimal elements by the form. In particular, although there have been done research on the window area ratio and the arrangement form, the research of the regional climate characteristics and the direction are hardly carried out. To supplement those problem, adding to seven direction and climatic element of southern region is characteristic(L Type, Y Type, - Type) of this study. The form of apartment houses built 10 years ago is modelled for simulation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.4
• /
• pp.591-599
• /
• 2016

This study analyzes the somatotype of tall stature Korean women's lower body for proper slack patterns. The study subjects consist of 350 statures over 165cm in 18-59 aged women's of Size Korea 2010. Descriptive statistics, factor analysis, cluster analysis, ANOVA, Duncan test were used for analysis using SPSS 19.0. The result are as follows: Factor 1 was the horizontal dimension of waist and hip, factor 2 was the vertical dimension of lower body, factor 3 was the horizontal dimension of the lower limbs, factor 4 was the crotch length, and factor 5 was the horizontal dimension of hip. The lower body was divided into 3 types based on analysis of the above factors. Type 1 (46.6%) represented stout type with a thick and medium length of crotch and leg. Type 2 (22.7%) represented a curve type from waist to hip with long crotch length, while short and thin leg. Type 3 (30.7%) was referred as slender type, with short crotch length, while long and thin leg.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.968-973
• /
• 2012

This study analyzes the structure types of salmon oil to evaluate the purity of salmon oil products based on the 38 different types of imported salmon oil products distributed in the Republic of Korea. The major types of omega-3 foods in the salmon oil are ethyl ester (EE) and triglyceride (TG). If the salmon oil contained potential contaminants and was processed in order to remove it, EE type omega-3 fatty acids are found in concentration. This provides a good guide in assessing if products were made with EE type ingredients or re-esterified contaminated materials. The results of the FT-IR analysis showed significant difference in the C=O, C-O band positions in TG and EE. There were 19 TG type products and 19 EE type products. The analysis of carbon isotope ratio was performed on the types of TG and EE. There were different properties in the 19 TG type products. In one product, the carbon isotope ratio was -25.15 and the other 18 products showed -22.15~-23.96. The carbon isotope ratio of all 19 EE type products showed -21.91~-23.74. The results of the TLC analysis showed similar results with FR-IR. The re-esterified TG form was not detected in the TG type products, confirming that the TG type products contained natural salmon oil. This study aimed to provide the basic material in classifying the types of natural salmon oil and re-esterified salmon oil, by analyzing the pattern and proportion of FT-IR spectrum, carbon isotope ratio, and TLC.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.83-96
• /
• 2000

The purpose of this study is to offer the basic data for chinese men' clothing construction. This study analyzes characterization and classification of body types of the Chinese men with body measurement values. This researcher executed the body measurement of total 39 items on 414 chinese men in Beijing and Shanghai aged 20-49 years old and analyzed the data with methods of analysis of variance, factor analysis and cluster analysis using it as the study item. The results of this study can be summarized as follows; 1. As the result of comparative analysis of the body measurements by age group and region group, the horizontal items such as the widths, depths, and girths increased with advancing ages, while heights decreased. 2. As the result of factor analysis on the items, 5 factors on such as the first factor on the obesity of body, the second factor on the size of vertical of body, the third factor on the length of upper body, the forth factor on the width of the shoulder, the fifth factor on the degree of dropping shoulder were extracted. 3. As the result of classification based on the cluster analysis, the body type were classified into 5 types. So, to see the feature of body form by types, type 1 was small stature, short parts of the body. type 2 was tallest, fattest and type 3 was small stature, fat. type 4 was tall, long length arm and leg, thick waist. type 5 was tall, long length arm and leg, fat.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.1
• /
• pp.161-171
• /
• 2007

The purpose of this study was to classify the lower body of the lost women and to investigate the three-dimensional characteristics of each lower body somatotype of them. The subject were ninety seven women whose. age were twenties and whose height and bust girth were in the range of mean$\pm1\delta$ of typical body size of twenties' Korean women. The forty one variables of their lower body were measured by Martin's Anthropometric Instrument. And they were analyzed for mean, standard deviations factor analysis, and cluster analysis. In the second phase of analysis, the three participants were re-selected in each type were measured by Sliding Guage and analyzed their lower body somatotype. The results were as follows; The components of lower body of 20s' women were extracted with 7 factors through factor analysis and orthogonal rotation by the method of Varimax. The rate of the cumulative contribution was 84.1% the first factor was the thickness of lower body, the second factor was the vertical size of lower body the third factor was the front shape of hip, the forth factor was the vertical size of hip, the fifth factor was the shape of abdomen, the six factor was the flat-ratio of waist and the seventh factor was flat-ratio of hip. The somatotype of 20's women's lower body can be classified into 3 types. Type 1 is the standard somatotype of 20's women's lower body and the 34.0% of the participants in the study was categorized into type 1. Type 2 is a short and corpulency type with protruded abdomen and hip and the 29.9% of the participants in the study was categorized into type 2. And the type 3 is a tall and thin type with plat abdomen and hip and the 37.1% of the participants was categorized into type 3.