• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.23-24
• /
• 2021

Since 2011, apartment houses account for about 41% of the fires in residential facilities for the past 10 years. Fire-resistant performance of fire doors is becoming more important to prevent the spread of fire in apartment houses. This research analyzed the structure of fire door through each 10 DB based on the quality inspection report of Continuous Acquisition & Life-cycle Support(CALS) from 2016 to 2020, which passed the fire performance test based on the laws and notices of domestic fire door. Therefore, based on the results of the analysis of DB in the future, we will conduct a study on structural improvement and addition for fireproof performance improvement of fire door.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.212-213
• /
• 2021

As structure and the waterproofing material are compressed through the backfilling process after the waterproofing material is installed on the underground structure at the actual site, there is a difference between the behavioral response force of the waterproofing material in the compressed state and the behavioral response force in the non-constrained state. In this regard, we will analyze the limitations of the current structural behavioral response evaluation and suggest an improvement plan so that the future test and evaluation environment can be evaluated under conditions similar to the field.

• Journal of information and communication convergence engineering
• /
• v.22 no.2
• /
• pp.98-108
• /
• 2024

Scrypt is a password-based key derivation function proposed by Colin Percival in 2009 that has a memory-hard structure. Scrypt has been intentionally designed with a memory-intensive structure to make password cracking using ASICs, GPUs, and similar hardware more difficult. However, in this study, we thoroughly analyzed the operation of Scrypt and proposed strategies to maximize computational parallelism in GPU environments. Through these optimizations, we achieved an outstanding performance improvement of 8284.4% compared with traditional CPU-based Scrypt computations. Moreover, the GPU-optimized implementation presented in this paper outperforms the simple GPU-based Scrypt processing by a significant margin, providing a performance improvement of 204.84% in the RTX3090. These results demonstrate the effectiveness of our proposed approach in harnessing the computational power of GPUs and achieving remarkable performance gains in Scrypt calculations. Our proposed implementation is the first GPU implementation of Scrypt, demonstrating the ability to efficiently crack Scrypt.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.559-564
• /
• 2010

The GMDH(Group Method of Data Handling) algorithm can be used to predict the complex nonlinear systems. The traditional GMDH algorithm produces the prdicted output of the system model in the output layer through the input layer and the intermediate layers as the prescribed process. The outputs of each layer are produced only by the outputs of the former layer. However, in the traditional GMDH algorithm, though the optimal structure of each layer is derived, the overall structure may not be derived optimally. To overcome this problem, GMDH prediction model which has the overall optimal structure is constructed by feeding back the error between the predicted output and the real output. This can make the prediction more precise. The capability improvement of the proposed algorithm compared to the traditional algorithm is verified through computer simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1653-1659
• /
• 2005

In this study, the performance of a DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. The DPRMs generates the measurement deviation. It is caused by the strong impact for the pile driving. To reduce it, the vibration signal analysis about the pile driving is performed. As a result, it is confirmed that the tilting frequency of a camera-tripod structure corresponding to excitation frequency range of the ground is under 40Hz. Through the structure modification, the camera-tripod structure is redesigned to the model being free itself from the excitation frequency range of the ground. By the verification testing about the improvement effects, it is inspected that the tilting and measurement deviation of the redesigned DPRMs are reduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.305-308
• /
• 2007

The field of dye-sensitized solar cell (DSC) is being researched actively at present. Because DSC has several advantages to pass the limits of Si solar cells such as a low manufacturing expense, a simple manufacturing process and its transparency. A lot of researches are underway about materials and processes in the field of dye-sensitized solar cell but its structure has been fixed up as the sandwich structure that both edges are used as positive and negative terminals. But the structure as of present is a factor of decreasing efficiency because the more electrons are recombined the further distance from terminal, considering about the characteristic of dye-sensitized solar cell that electrons generated inside cell are moved by diffusion. In this study, we made experiment on expanding the terminal to shorten internal moving distance of electron and compared the results according to the variation of active area to find out the effect of this trial. As a result, we achieved about 15.5% improvement of maximum power and 0.5% improvement of efficiency from terminal-expanded dye-sensitized solar cell of $2cm^{2}$ active area and concluded that the increasing rate of efficiency is raised as the active area becomes wider.

• Journal of the Korean housing association
• /
• v.17 no.1
• /
• pp.97-105
• /
• 2006

The purposes of this study are to find out the current status and features of earth housing, and to explore users' level of satisfaction and needs of improvement about earth housing. Primary findings are as follows: (1) The area of earth housing is generally 25-34 pyong and the construction cost of earth housing is usually 3,000,000-3,400,000 won per pyong. (2) The age of earth house users is generally forties, fifties, and sixties. And their occupation is usually retiree and farmer. The age of earth based pension users is generally twenties and thirties. (3) The construction method of earth housing is usually earth brick structure reinforced with wood structure and earth brick structure(adobe). (4) The finish of outer wall is generally earth brick laying and earth plaster. And the finish of inner wall is usually wall paper and earth plaster. Roof tile and asphalt shingle is frequently observed as roof finish. (5) Users' satisfaction about earth housing is investigated high level. Especially, the satisfaction degrees about faculty of humidity control, stink elimination, prevention from sick house syndrome, support for psychological stabilization and deep sleep are observed very highly. (6) Reduction of construction cost and prevention of crack is investigated as needs of improvement about earth housing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.820-826
• /
• 2011

In this paper, an efficiency improvement method in the wireless power transfer system based on magnetic resonance is proposed. A combined helical-spiral structure is adopted for self-resonant coil and source and device coils are designed using circular loop structure. The proposed resonator utilizing combined helical-spiral structure yields 13 % efficiency improvement over that of an existing helical type resonator when the transmitting and receiving coils are separated by 120 mm. In addition, the size can be reduced by 33 % comparing to the previous resonator.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.29-35
• /
• 2014

In this study general solar cell production process was complemented, with research on improvement of solar cell efficiency through surface structure and thermal annealing process. Firstly, to form the pyramid structure, the saw damage removal (SDR) processed surface was undergone texturing process with reactive ion etching (RIE). Then, for the formation of smooth pyramid structure to facilitate uniform doping and electrode formation, the surface was etched with HND(HF : HNO3 : D.I. water=5 : 100 : 100) solution. Notably, due to uniform doping the leakage current decreased greatly. Also, for the enhancement and maintenance of minority carrier lifetime, antireflection coating thermal annealing was done. To maintain this increased lifetime, front electrode was formed through Au plating process without high temperature firing process. Through these changes in two processes, the leakage current effect could be decreased and furthermore, the conversion efficiency could be increased. Therefore, compared to the general solar cell with a conversion efficiency of 15.89%, production of high efficiency solar cell with a conversion efficiency of 17.24% was made possible.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.720-724
• /
• 2008

Concentration about value of invisible asset has increased in the condition of rapid business circumstance change. As one of these concentration, many company adopted knowledge management, and construction industry also tried to adopt knowledge management. However, it is difficult for construction company to get expected effects because of knowledge management system in no relation with business process. To solve this problems, this study adopted BPM that has many functions, such as business process design, operation, monitoring, sustainable improvement, to knowledge classification structure.