• Korean Institute of Interior Design Journal
• /
• no.19
• /
• pp.76-82
• /
• 1999

It is propelled that this study recognizes the significance of environmental color derived from counteraction of learning activities due to the random use of indoor color in elementary school. The purpose of this study is to provide by analysing low the elementary school's indoor color environment is effected upon the child's patterns of activity and consciousness structure, through questionaire survey the data needed for the establishment of the standard indoor color in elementary school.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.150-154
• /
• 2000

Coloring admixture is used for take color inside and outside of mortar and concrete, differently form pigment and spray paint take color limited surface. In our country, Using the coloring admixture is very slight and regulation is not yet about it. But that is expected the increase with raising the standard of living. Especially it is used to civil structure like dam and seawall for the environment harmony. Then we observe, in this experiment, the effect of coloring admixture on the material properties of color concrete and propose the suitable mix-proportion of color concrete.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.235-238
• /
• 2007

eMagin's unique OLED-on-silicon microdisplay technology is unique and is based on small molecule white OLED with color filters using a top emitter structure. This paper will present results of recent improvements in the technology including improved lifetimes and uniformity and will feature an SVGA resolution full color microdisplay that is 0.44 inches diagonal.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.485-495
• /
• 2023

The pixel size in high-resolution complementary metal-oxide-semiconductor (CMOS) image sensors continues to shrink due to chip size limitations. However, the pixel pitch's miniaturization causes deterioration of optical performance. As one solution, a quad color filter (CF) array with pixel binning has been developed to enhance sensitivity. For high sensitivity, the microlens structure also needs to be optimized as the CF arrays change. In this paper, the covered microlens, which consist of four microlenses covered by one large microlens, are proposed for the quad CF array in the backside illumination pixel structure. To evaluate the optical performance, the suggested microlens structure was simulated from 0.5 ㎛ to 1.0 ㎛ pixels at the center and edge of the sensors. Moreover, all pixel structures were compared with and without in-pixel deep trench isolation (DTI), which works to distribute incident light uniformly into each photodiode. The suggested structure was evaluated with an optical simulation using the finite-difference time-domain method for numerical analysis of the optical characteristics. Compared to the conventional microlens, the suggested microlens show 29.1% and 33.9% maximum enhancement of sensitivity at the center and edge of the sensor, respectively. Therefore, the covered microlens demonstrated the highly sensitive image sensor with a quad CF array.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.427-433
• /
• 2014

PURPOSE. Surface color is one of the main criteria to obtain an ideal esthetic. Many factors such as the type of the material, surface specifications, number of firings, firing temperature and thickness of the porcelain are all important to provide an unchanged surface color in dental ceramics. The aim of this study was to evaluate the color changes in dental ceramics according to the material type and glazing methods, during the multiple firings. MATERIALS AND METHODS. Three different types of dental ceramics (IPS Classical metal ceramic, Empress Esthetic and Empress 2 ceramics) were used in the study. Porcelains were evaluated under five main groups according to glaze and natural glaze methods. Color changes (${\Delta}E$) and changes in color parameters (${\Delta}L$, ${\Delta}a$, ${\Delta}b$) were determined using colorimeter during the control, the first, third, fifth, and seventh firings. The statistical analysis of the results was performed using ANOVA and Tukey test. RESULTS. The color changes which occurred upon material-method-firing interaction were statistically significant (P<.05). ${\Delta}E$, ${\Delta}L$, ${\Delta}a$ and ${\Delta}b$ values also demonstrated a negative trend. The MC-G group was less affected in terms of color changes compared to other groups. In all-ceramic specimens, the surface color was significantly affected by multiple firings. CONCLUSION. Firing detrimentally affected the structure of the porcelain surface and hence caused fading of the color and prominence of yellow and red characters. Compressible all-ceramics were remarkably affected by repeated firings due to their crystalline structure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.445-450
• /
• 2009

This paper presents a new mobile robot localization method for indoor robot navigation. The method uses hexagon distributed color-coded patches on the ceiling and a camera is installed on the robot facing the ceiling to recognize these patches. The proposed "cell-coded map", with the use of only seven different kinds of color-coded landmarks distributed in hexagonal way, helps reduce the complexity of the landmark structure and the error of landmark recognition. This technique is applicable for navigation in an unlimited size of indoor space. The structure of the landmarks and the recognition method are introduced. And 2 rigid rules are also used to ensure the correctness of the recognition. Experimental results prove that the method is useful.

• Textile Coloration and Finishing
• /
• v.3 no.4
• /
• pp.1-6
• /
• 1991

The influence of chemical structure of Benzopurpurine 4B and Congo Red on the color fastness properties of cotton fabric have been studied at $90^{\circ}C$. Each dyeing carried with $10\times10^{-6}M$ of dye concentration and 0.1 M of NaCl. The results obtained from this study were as follow; 1. The properties of fastness to washing by Benzopurpurine 4B were superior to those of Congo Red. 2. The properties of fastness to light by Congo Red were superior to those of Benzopurpurine 4B. 3. The color variation appeared more vividly in the case of Benzopurpurine 4B than Congo Red and the color shifted to Red Purple after washing test but to Yellow Red after Fade-O-meter test.

• Journal of Broadcast Engineering
• /
• v.5 no.1
• /
• pp.102-112
• /
• 2000

The previous video structuring techniques are mainly limited to shot or shot group level. However, the shot level structure couldn't provide semantics within a video. So, researches on high level structuring are going on for getting over the drawbacks of shot level structure, recently. To overcome the drawbacks of shot level structure, we propose video scene segmentation technique based on color and motion features. For considering various color distribution, each shot is divided into sub-shots based on color feature. A key frame is extracted from each sub-shot. The motion feature in a shot is extracted from MPEG-1 video's motion vector. Moreover adaptive weights based on motion's property in search range are applied to color and motion features. The experiment results of proposed technique show the excellence in view of the over-segmentation and the reflection of semantics, comparing with those of previous techniques. The proposed technique decomposes video into meaningful hierarchical structure and provides video browsing or retrieval based on scene.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.138-145
• /
• 2012

The epidermal color is one of factors the space for ages. Instead of the epidermal color expression, it made with material and decoration under structure for make shade of meaning before have the new media. But now a days, the epidermal color of the fashion store is getting free owe to the development of color harmony, has a great notion that gets out of the subordinate from color, and it is a emphasized factor with expression and self-control. The epidermal color of the fashion store makes an effort to accept the development and changing of new media. It should show that there role and function is changing constantly according to a new technology, and it gave a motivation for reanalysis about existence and expression of the epidermal color. The purpose of this research is that look around the feature of the epidermal color system, elements, and principle. Then contemporary fashion store is expressive characteristics of epidermal color. Using epidermal color is not common, we can find lots of the case with surface color, layer color, interface color, though. The paper reflects on the meaning and concept of fashion store which enables the application of expressive characteristics on space through advanced technology. Meanwhile, the features of epidermal color such as immateriality of process and communication can be inferred from case analysis.

• Journal of Powder Materials
• /
• v.23 no.6
• /
• pp.453-457
• /
• 2016

In this work, we synthesize brilliant yellow color ${\alpha}$-FeOOH by controlling the rod length and core-shell structure. The characteristics of ${\alpha}$-FeOOH nanorods are controlled by the reaction conditions. In particular, the length of the ${\alpha}$-FeOOH rods depends on the concentration of the raw materials, such as the alkali solution. The length of the nanorods is adjusted from 68 nm to 1435 nm. Their yellowness gradually increases, with the highest $b^*$ value of 57 based on the International Commission on Illumination (CIE) Lab system, by controlling the nanorod length. A high quality yellow color is obtained after formation of a silica coating on the ${\alpha}$-FeOOH structure. The morphology and the coloration of the nal products are investigated in detail by X-ray diffraction, scanning electron microscopy, UV-vis spectroscopy, and the CIE Lab color parameter measurements.