• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.437-450
• /
• 2014

In this study, we developed a methodology to determine the reference parameter for an aircraft impact induced risk assessment of nuclear power plant (NPP) using finite element impact analysis of containment building. The target structure used to develop the method of reference parameter selection is one of the typical Korean PWR type containment buildings. We composed a three-dimensional finite element model of the containment building. The concrete damaged plasticity model was used for the concrete material model. The steels in the tendon, rebar, and liner were modeled using the piecewise-linear stress-strain curves. To evaluate the correlations between structural response and each candidate parameter, we developed Riera's aircraft impact force-time history function with respect to the variation of the loading parameters, i.e., impact velocity and mass of the remaining fuel. For each force-time history, the type of aircraft is assumed to be a Boeing 767 model. The variation ranges of the impact velocity and remaining fuel percentage are 50 to 200m/s, and 30 to 90%, respectively. Four parameters, i.e., kinetic energy, total impulse, maximum impulse, and maximum force are proposed for candidates of the reference parameter. The wellness of the correlation between the reference parameter and structural responses was formulated using the coefficient of determination ($R^2$). From the results, we found that the maximum force showed the highest $R^2$ value in most responses in the materials. The simplicity and intuitiveness of the maximum force parameter are also remarkable compared to the other candidate parameters. Therefore, it can be concluded that the maximum force is the most proper candidate for the reference parameter to assess the aircraft impact induced risk of NPPs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.41-46
• /
• 2011

The artificial aggregates (AAs) composing of 2 wastes, coal bottom ash and dredged soil (7 : 3, weight ratio) were fabricated as a function of red mud contents,0~30 wt% using direct sintering method at $1050{\sim}1250^{\circ}C$ for 10 min, and those physical properties were evaluated. Especially, in order to analyze the red mud addition effect on the bloating phenomenon of AAs manufactured, the specific gravity and water absorption were measured and studied linked with the microstructural observation results. The lightening of AAs was enhanced due to increased bloating with increasing temperature and red mud contents. The AAS sintered at $1050{\sim}1150^{\circ}C$ showed well-developed black-coring structure, but for the specimens containing red mud sintered over $1200^{\circ}C$ generated excessive liquid and gas caused by reduction of $Fe_2O_3$, thus the black-coring part was gradually burst open out of shell of AAs. Particularly, all specimens containing 30 wt% red mud was burst up when sintered over $1100^{\circ}C$. The AAs containing no red mud sintered at $1200^{\circ}C$ had a specific gravity of about 1.2 and those containing 20 wt% had below 1.0 which are characters of lightweight aggregate.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.140-145
• /
• 2016

Excessive occlusal wear causes loss of tooth structure, occlusal plane disharmony, impaired function and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by the growth of alveolar bone and tooth eruption, minimal increase of occlusal vertical dimension may be required for esthetics and retention of prosthesis. In this case, a 44-year-old male patient visited Seoul National University Dental Hospital with chief complaint of severe tooth wear and shade disharmony. Based on assessment of diagnostic wax-up, 3 mm increase of occlusal vertical dimension was determined. Removable occlusal splint and interim prosthesis was used to ascertain patient's comfort and adaptation. After the adaptation period, definitive prosthesis fabricated with full-contour monolithic zirconia were delivered and the patient was recommended to wear a nightguard device for prosthesis protection. This report presents a case of full mouth rehabilitation with the elevation of patient's occlusal vertical height, resulting in satisfactory esthetics and functions.

• Journal of The Korean Association For Science Education
• /
• v.33 no.4
• /
• pp.751-762
• /
• 2013

The purpose of the study is to develop a science writing program for middle school students and to analyze the effects of this program. The program consists of twenty-one 10-minute long sessions in 2 chapters (stimulus and response; the structure and function of plants) from the $2^{nd}$ year middle school textbooks. The team selected themes in science writing that can cultivate multiple facets of creativity in students: flexibility, originality and elaboration. The format of the science writing was diverse. The program was conducted through worksheets, and there was separate section within the worksheet for teacher to give feedback to students. The science writing program with teacher's feedback improved students' scientific creativity(p<.01). It seems like teacher's feedback is critical in checking students' concept and boosting students' creativity. The program is statistically effective in improving students' flexibility(p<.01), however it is not the case for improving on their originality and ability to elaborate(p>.05). We assumed that the relatively extensive portion of the writing was not suitable to improve students' ability to elaborate their ideas further as well as fostering originality. In order to improve the students' creativity and ability to elaborate, there is a need to adjust the amount of science writing, content, time.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1055-1062
• /
• 2002

Recently, the lesson plan document that is imported in the educational area is not provided to the educational information systematically, and the teachers are not easy to compose the lessen plan documentation. So, it needs additional time and effort to develope the lesson plan documents. Because of increasing the distributing network. web-based lesson plan system is required to all of the education area. Therefore, we need to compose the lesson plan that is possible to obtain the various teacher's requirement by providing creation, retrival, and reusability of document using the standard XML on web. In this paper, we developed the system for creating the common DTD (Document Type Definition), providing the standard XML document through the common DTD over the lesson plan analysis. In this system, it provides the editor to compose the lesson plan and supports the searching function to improvement of reusability on the existing lesson plan. We design the searching functions such as the structure base, facet and keyword. The composed lesson plans are interoperated with Database. Consequently, we can share the information on web by composing the lesson plan using the XML and save the time and cost by directly writing the lesson plan on web. We can also provide the improved learning environment.

• Journal of Christian Education in Korea
• /
• v.61
• /
• pp.81-107
• /
• 2020

This study reviews Bandura's vicarious reinforcement in observational learning process and implies this concept into Christian education in terms of spiritual role modeling. The first part of this study answers three questions: "what is vicarious reinforcement?" "how does vicarious reinforcement take place in observational learning?" and "how does vicarious reinforcement affect observer's behavior change?" Bandura conceptualizes the learning process with observational learning and imitative or non-imitative performance. Based on this concept, Bandura define the roles of vicarious reinforcement in the four steps of observational learning process: attention, retention, motor reproduction, and motivational process. Also, the three effects of vicarious reinforcements are explained in the following categories: the observational learning effect, inhibitory or disinhibitory effects, and eliciting effect. Adapting the structure of observational learning theory in terms of the effect of vicarious reinforcement and the function of role models, the second part of this study examines the biblical concept of imitation of Christ and the modeling strategy of discipleship. Especially Paul's spiritual role model serves as positive vicarious reinforcement for the Christian believers to perform the desired behaviors. Also, Paul's condemnation serves as explicit negative vicarious reinforcement. Then, the last part of this study covers the implication of these findings from observational learning and empirical studies in terms of spiritual role modeling to Christian education.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.194-200
• /
• 2005

The N hyperfine coupling constants ($a_N$) of di-t-butyl nitroxide (DTBN) radicals in water-solvent system were measured with EPR spectroscopy. Various kinds of the solvents with different polarity such as acetone, dimethylsulfoxide (DMSO), methanol, ethanol and 1-propanol were applied and studied. Equilibrium constants for the solvation equilibrium and the solvent parameters ($E_T$, molar transition energy) of various water-solvent system were obtained from the experimental results and are presented. The $a_N$ values were plotted as a function of mole fraction of the solvent. In case of water-DMSO, water-ethanol and water-1-propanol system, slight negative deviations from the straight line were observed. In water-acetone system, the absorption wavelength (${\lambda}$) due to ${\eta}{\rightarrow}{\pi}^{\ast}$ transition increased linearly with the increase of mole fraction of acetone. The relationship between $a_N$ of DTBN and ${\lambda}$ due to ${\eta}{\rightarrow}{\pi}^{\ast}$ transition in water-acetone and water-DMSO system was examined. It was found that the electronic structure of the nitroxide radicals is stablized from the fact that the N hyperfine coupling constants of DTBN radicals are greatly unaffected in the environment of water-solvent system.

• Journal of Life Science
• /
• v.14 no.2
• /
• pp.325-330
• /
• 2004

The RAD3 gene of Saccharomyces cerevisiae is required for excision repair and is essential for cell viability. RAD3 encoded protein possesses a single stranded DNA-dependent ATPase and DNA and DNA-RNA helicase activities. To examine the extent of conservation of structure and function of RAD3 during eukaryotic evolution, the RAD3 homolog gene was isolated by screening of genomic DNA library. The isolated gene was designated as HRD3 (Homologue of RAD3 gene). The over-expressed HRD3 protein was estimated to be a 75 kDa in size which is in good agreement with the estimated by the nucleotide sequence of the cloned gene. Two-dimensional gel electrophoresis showed that a number of other protein spots dramatically disappeared when the HRD3 protein was overexpressed. The overexpressed RAD3 protein showed a toxicity in E. coli host, suggesting that this protein may be involved in the inhibition of protein synthesis and/or degradation of host protein. To determine which part of HRD3 gene contributes to the toxicity in E. coli, various fusion plasmids containing a partial sequence of HRD3 and lac'Z gene were constructed. These results suggest that the C-terminal domain of HRD3 protein may be important for both toxic effect in E. coli and for its role in DNA repair in S. pombe.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.53-60
• /
• 2017

When attempting to restore the oral function of a partially edentulous patient, there are a number of prosthetic treatment options available, depending on the structure of remaining teeth. For example, when only one set of maxillary and mandibular teeth are diagonally in place across from each other, it is difficult to gain stable occlusion. In this case, implants can be put in place at the corresponding edentulous area to achieve balance. By doing so, a stable occlusion can be achieved. For this case report, a patient with crossed occlusion after extraction was treated with maxillary RDP (removable dental prosthesis) and mandibular implant-supported RDP (removable dental prosthesis). Moreover, an implant fixture was placed under the posterior molar of the distal extension base diagonally across from the remaining maxillary teeth. Then, magnetic attachment was implemented. According to the patient who received the treatment, the result was functionally and aesthetically satisfactory.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.224-235
• /
• 2013

A passively fitting prosthesis is an essential prerequisite to attain long-lasting success and maintenance of osseointegration. However, true "passive fit" can not be achieved with the present implant-supported prosthesis fabrication protocol. Many clinical situations are suitably treated with cantilevered implant-supported fixed restorations. The purpose of this study was to compare the stress distribution pattern and magnitude in supporting tissues around ITI implants with cantilevered, implant-supported, screw-retained fixed prosthesis according to the fitness of superstructures. Photoelastic model was made with PL-2 resin (Measurements, Raleigh, USA) and three ITI implants (${\phi}4.1{\times}10mm$) were placed in the mandibular posterior edentulous area distal to the canine. Anterior and posterior extended 4-unit cantilevered FPDs were made with different misfit in the superstructures. 4 types of prosthesis were made by placing a $100{\mu}m$ gap between the abutment and the crown on the second premolar and/or the first molar. Photoelastic stress analysis were carried out to measure the fringe order around the implant supporting structure under simulated loading conditions (30 lb).