• Korean Journal of Health Education and Promotion
• /
• v.27 no.2
• /
• pp.79-93
• /
• 2010

Objectives: This study aims to identify the factors associated with the stages of change in colorectal cancer screening, and develop a model explaining these stages of change by using structural equation modeling analysis. Methods: On the basis of literature review and expert advice, we constructed our hypothetical model that consisted of five theoretical constructs(process of change, pros, cons, self-efficacy, stage of change). In 2009, data was collected from 486 participants aged between 50 and 69. The data were analyzed by SPSS 15.0 and AMOS 6.0. Results: In the case of stage of adoption, the contemplation stage was the most common (37.4%), followed by the action stage (26.5%). In the final model of the stage of change for colorectal cancer screening, there was a direct influence of the process of change ($\gamma$=.562, p<.001), and cons ($\gamma$=.132, p<.01) on the stage of change with the terms of GFI .931, AGFI .904, RMR .038, NFI .930, and NNFI .936. Conclusion: It is necessary to produce and disseminate evidence-based cancer screening information, which can mitigate the negative attitude among the public toward cancer screening. Also, it is essential to provide a safer and more comfortable environment at cancer screening center.

• Korea Trade Review
• /
• v.46 no.1
• /
• pp.83-111
• /
• 2021

This paper conducts a Structural Dcomposition Analysis on the structure of factors contributing to the output growth of Korean Maritime and Port Industry during year 2000~ year 2017. Some of results are as follows. The output growth rates of the industry (yearly average 4.3%) was far lower than the average growth rates of Service as well as of Manufacturing Industries (yearly average 9% and 6.8%, respectively) due to the lower output growth of Maritime Industry. Among the growth contributing factors, change in domestic demand for final goods is the first contributing factor, and then change in technology, change in export and import substitution for intermediate goods are followed in order, but import substitution for final goods decreased its output. However, in each respective sub-periods of pre-global financial crisis and post-global financial crisis, change in the export, especially change in the export of Maritime Industry is the dominant determinant of output change in the Maritime and Port Industry in opposite ways. In the periods of the former the increase in the export of Maritime Industry overwhelmingly led the output growth of the Maritime and Port industry, but in the periods of the latter the decrease in its export was the culprit of lower output growth of the industry. On the other hand, among all industries of service and manufacturing sectors, Wholesale and Retail industry is the leading industry in contributing to the output growth of the Maritime and Port Industry, and Transportation Equipment industry is the leading industry among all manufacturing industries.

• International Journal of Advanced Culture Technology
• /
• v.7 no.3
• /
• pp.103-110
• /
• 2019

The purpose of this study was to investigate the relationship between psychosocial factors, such as self-esteem, stress coping, and social support, and motivation for change in alcohol dependent inpatients. This study included 179 inpatients in the 7clinics for alcoholic in Chonbuk. For the analysis of the study questions, this study utilized the structural equation modeling. The results show that self-esteem was related to motivation for change with mediating role of problem-focused stress coping strategy in alcohol dependent inpatients. The study also reveal that self-esteem and social support was directly associated with the motivation for change. Based on the findings, the importance of programs to promote self-esteem and the involvement of family and acquaintances in the treatment process has been suggested.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.428-431
• /
• 2004

Smart structural system is defined as structural system with a certain-level of autonomy relying on the embedded functions of sensors, actuators and processors, that can automatically adjust structural characteristics, in response to the change in external disturbance and environments, toward structural safety and serviceability as well as the extension of structural service life. In this study, carbon and glass hybrid fiber materials were investigated fundamentally for the applicability of self diagnosis in smart concrete structural system as embedded functions of sensors.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.895-910
• /
• 2019

Purpose: The purpose of this study is to lighten the APU (Auxiliary Power Unit) structure of the KAAV (Korea Assault Amphibious Vehicle) through structural analysis. Methods: Commercially-available program (MIDAS.NFX) was used for finite element analysis. Frequency response analysis was performed through linear static and mode analyses to verify the structural stability according to the change of the structural materials. Results: Numerical simulation (linear static, mode and frequency response analyses) results showed that the safety factor of the APU was over 1.5 even under the worst case conditions. The APU made by aluminum structures was expected to be available in the military field, since every requirements in the KDS (Korean Defense Specifications) was fulfilled during the various tests and evaluations. Conclusion: The structural analysis was verified that the structural stability of the APU structure of the KAAV after change of the structural material.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.113-123
• /
• 2006

As Cable-stayed bridges were constructed to the long span, they have become bigger and had weaknesses to vibration induced by earthquake, wind and vehicle loads. Structural damages induced by these loads affect the characteristic of vibration modes of structure. Damage detection of cable-stayed bridges by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. Also it requires very much time and cost. So in this study, the investigation of characteristic change of structural action and the detection of structural damages is analyzed by using characteristic properties of vibration mode before and after structural damage.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.231-238
• /
• 2020

In the case of ICT-enabled organizational changes such as Smart Work, appropriate change management is required. To achieve work-life balance, organizational change management should be conducted from both a structural and a cultural perspective. This study looked at organizational factors that affect Smart Work facilitation through a case study with the view of ICT-enabled change management. From November to December 2019, eight Smart Workers of Company A were interviewed and analyzed for organizational support. The results show that structural support such as institutionalization, ICT infrastructure office environment improvement, Smart Work center as well as cultural support such as enhancing autonomy, communicating style of managers, trusting organizational climate are required. The findings suggest balanced organizational support to provide cultural support along with structural support for activating Smart Work operations. In the future, it is necessary to demonstrate the causality between structural/cultural support factors and outcome factors.

• Journal of Environmental Health Sciences
• /
• v.34 no.5
• /
• pp.343-350
• /
• 2008

Quantifying greenhouse gas (GHG) emissions in the waste sector is important to evaluating measures for reduction of GHG emissions. To forecast GHG emissions and identify potential emission reduction for GHG emissions, scenarios applied with environmental policy such as waste reduction and structural change of waste treatment were developed. Scenario I estimated GHG emissions under the business as usual (BAU) baseline. Scenario II estimated GHG emissions with the application of the waste reduction policy while scenario III was based on the policy of structural change of waste treatment. Scenario IV was based on both the policies of waste reduction and structural change of waste treatment. As for the different scenarios, GHG emissions were highest under scenarios III, followed by scenarios IV, I, and II. In particular, GHG emissions increased under scenario III due to the increased GHG emissions from the enhanced waste incineration due to the structural change of waste treatment. This result indicated that the waste reduction is the primary policy for GHG reduction from waste. GHG emission from landfill was higher compared to those from incineration. However, the contribution of GHG emission from incineration increased under scenario III and IV. This indicated that more attention should be paid to the waste treatment for incineration to reduce GHG emissions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.12 no.1
• /
• pp.19-26
• /
• 1987

In analyzing time series, estimating the level or the current mean of the process plays an important role in understanding its structure and in being able to make forecasts. The studies the class of time series models where the level of the process is assumed to follow a random walk and the deviation from the level follow an ARMA process. The estimation and forecasting problem in a Bayesian framework and uses the Kalman filter to obtain forecasts based on estimates of level. In the analysis of time series, we usually make the assumption that the time series is generated by one model. However, in many situations the time series undergoes a structural change at one point in time. For example there may be a change in the distribution of random variables or in parameter values. Another example occurs when the level of the process changes abruptly at one period. In order to study such problems, the assumption that level follows a random walk process is relaxed to include a major level change at a particular point in time. The major level change is detected by examining the likelihood raio under a null hypothesis of no change and an alternative hypothesis of a major level change. The author proposes a method for estimation the size of the level change by adding one state variable to the state space model of the original Kalman filter. Detailed theoretical and numerical results are obtained for th first order autoregressive process wirth level changes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.207-214
• /
• 2000

In this paper, a study of the effenctiveness and convergency of five damage measures for structural damage detection of 2-dimensional truss structure using the extended Kalman filtering algorithm is presented. These damage measures are associated with the change in mode shape and displacement due to structural damage. Damage measures contain the change in natural frequency, mode shape, curvature of mode shape, displacement of static force and curvature of displacement of static force. The effectiveness and convergency of these damage measures by using extended Kalman filtering algorithm are demonstrated with the numerical examples.