• Structural Engineering and Mechanics
• /
• v.58 no.1
• /
• pp.143-161
• /
• 2016

Utilization of mineral and chemical admixtures in concrete technology has led to changes in the formulation and mix design in recent decades, which has, in turn, made the concrete stronger and more durable. Lightweight concrete is an excellent solution in terms of decreasing the dead load of the structure, while self-compacting concrete eases the pouring and removes the construction problems. Combining the advantages of lightweight concrete and self-compacting concrete is a new and interesting research topic. Considering its light weight of structure and ease of placement, self-compacting lightweight concrete may be the answer to the increasing construction requirements of slender and more heavily reinforced structural elements. Twenty one laboratory experimental investigations published on the mix proportion, density and mechanical properties of lightweight self-compacting concrete from the last 12 years are analyzed in this study. The collected information is used to investigate the mix proportions including the chemical and mineral admixtures, light weight and normal weight aggregates, fillers, cement and water. Analyzed results are presented in terms of statistical expressions. It is very helpful for future research to choose the proper components with different ratios and curing conditions to attain the desired concrete grade according to the planned application.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.7
• /
• pp.41-47
• /
• 2021

In this study, the hinges of heavy weight doors were designed and analyzed in line with the trend that built-in appliances are becoming larger and the weight of doors is also increasing. The main specification of the heavy weight door hinge is to allow the deflection at the end of the door to be less than 2 mm when opening and closing, including the automatic closing, slow closing, and closing force control functions. The structural analysis of the design mechanism, component design, and methods for improving the deflection are as follows: 1) Mechanism of the automatic closing function should sense automatically using the spring compression force at a specific angle by the contact between the cam and the cam module roller. 2) Through structural analysis, the maximum stress of the door was found in the link pin hole connected to the pin at each link. 3) Consequently, the pin holder was designed and applied, with little variance, but up to 93% of the specification limit.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.36-43
• /
• 2009

Recently, the structural similarity (SSIM) index metric is proposed. In the present paper, a new framework, which is called visual SSIM (VSSIM), is proposed by incorporating crucial human factors into the SSIM. The human factors are foveation, luminance, frequency and motion information. The performance of VSSIM is evaluated by subjective quality test compliant with the Video Quality Expert Group (VQEG) multimedia group test plan. It shows that the visual SSIM is more correlated with the subjective quality result than the conventional SSIM.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.15-19
• /
• 1989

This experiment was carried out in order to know the changes in dry matter production of the 2nd cutting by the times of established pasture and its relation with morphological and structural characters of orchardgrass sward. Experimental pasture was established by the times of year, from 1 year to 7 year, 1986 through 1980, alternately. The results were summarizedas follows: 1. The population density of the 2nd cutting was extremely decreased by the times of established year. 2. The dry weight of $plantsW)$ was positively significant correlations with plant length(PL), number of tillers per plant (NT/pl.) and the dry weight of plant(DW/pl.). 3. The highest value of the dry weight of plants(DW) was obtained at 7 year old pasture. 4. The pasture productivity of 7 year old pasture was resulted by the increases of regrowth capacity, yield components and structural characters of the 2nd cutting. 5 . Relationship between morphological and structural characters concerned vegetational structure of the 2nd cutting were changeable year by year.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1240-1251
• /
• 2007

The purpose of this study was to examine the relationship between weight of fabrics and texture and sensibility and preference of consumers for F/W women's jacket fabrics. Structural Equation Model(SEM) using AMOS program was conducted to analyze the relationships. Then, this study aimed to provide useful information in planning designing fabrics through predicting the subjective characteristics analyzed. The main survey was developed the 7-point semantic differential scale of subjective texture, sensibility and preference. Fifty trained female panelists of 20-30 years old were participated and questionnaire method was used with 20 kind of fabric. The evaluation methods such as by the sense of sight & touch were used when fabrics were estimated subjectively. When evaluated by the sense of sight & touch, fabric's weight did not have effect directly on preference, but had effect indirectly on preference through the texture and the sensibility..

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.141-151
• /
• 2018

A trajectory analysis program was developed to predict KSLV-II (Korea Space Launch Vehicle-II) performance with the reducing weight. The program estimates the LEO (Low Earth Orbit) / SSO (Sun-Synchronous Orbit) injection performance, which is determined as payload weight for the orbits, with decreasing the structural ratio or increasing rocket engine power. It is expected that the KSLV-II can transport up to 4.5 tons, 3 tons of space payloads at LEO, SSO with a reduced structural ratio by 60% of the original. It also shows that the KSLV-II can transport up to 3.65 tons at SSO by applying advanced engines of 90 tonf, 10 tonf class with the reduced structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.203-203
• /
• 1999

Mass spectrometry technique provides the molecular weight distribution, data on the sequence of repeat units, polymer additives, and impurities, and structural information. time-of-Flight secondary Ion Mass Spectrometry (TOF-SIMS) has been used for structural characterization of various polymers1-2. the masses of repeat units and terminal groups and molecular weight distributions of polymers have been determined from their TOF-SIMS spectra. TOF-SMIS provides good sensitivity and structural specificity for high mass ions so that intact oligomers and large polymer fragments are observed. In this study, we investigated the detailed structural information on the oligomers and fragment ions of branched poly(1,3-butylene adipate) and branched poly[di(ethylene glycol) adipate] and the transesterification products of branched polyesters with trifluoroacetic acid or chloro difluoroacetic acid. Branched polyesters were chosen because they are important polymers but difficult to characterize; thus branched polyesters provide challanging test for TOF-SIMS. TOF-SIMS spectra of polyesters are obtained from thin polymer films cast from solution on a silver substrate. A good solvent for a polumer solution disrupts intermolecular forces between polymer chains but leaves the polumer intact. Transesterification reactions are potentially useful for characterization of high molecular weight and intractable polyesters. Transesterification products of polyesters and trifluoroacetic acid or an integral number of polyester repeat units and an additional diol. The progress of such reactions was monitored using peak intensities of reactants and products in TOF-SIMS spectra. The increasing abundance of tagged ions indicates that the reaction has progressed with time.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.253-260
• /
• 2024

Objective: The objectives of the present study were to evaluate the effects of once-a-day milk feeding on growth performance and routine behavior of preweaning dairy calves. Methods: At 22nd day of age, twenty-four Holstein calves were randomly assigned to one of two treatment groups (n = 12/treatment) based on milk feeding frequency (MF): i) 3 L of milk feeding two times a day; ii) 6 L of milk feeding once a day. The milk feeding amount was reduced to half for all calves between 56 and 60 days of age and weaning was done at 60 days of age. To determine the increase in weight and structural measurements, each calf was weighed and measured at 3 weeks of age and then at weaning. The daily behavioral activity of each calf was assessed from the 22nd day of age till weaning (60th day of age) through Nederlandsche Apparatenfabriek (NEDAP) software providing real-time data through a logger fitted on the calf's foot. Results: There was no interaction (p≥0.17) between MF and sex of the calves for routine behavioral parameters, body weight and structural measurements. Similarly, there was no effect of MF on routine behavioral parameters, body weight and structural measurements. However, the sex of the calves affected body weight gain in calves. Male calves had 27% greater total body weight and average daily gain than female calves. There was no effect of the sex of the calves on behavioral measurements. Collectively, in the current study, no negative effects of a once-a-day milk feeding regimen were found on routine behavioral and growth parameters of preweaning calves in group housing. Conclusion: Once-a-day milk feeding can be safely adopted in preweaning calves from 22nd day of age.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.4
• /
• pp.23-30
• /
• 2018

The purpose of this study is to evaluate the structural safety of cultural altar since its bearing capacity has been questioned due to weathering damages and sectional defections. This evaluation process consists two stages; which the first is field investigation and the second is structural modeling and analysis. Based on field investigation, all of the structural members supporting the altar were carefully examined and all the findings were accounted for the development of the structural modeling using the Midas computer program. Using a 3D scanner, the weight of the Buddha statue was applied to the structural modeling. Then, according to the allowable stress design method of KBC2016, the structural safety was evaluated. Based on this result, replacements of several structural members were recommended to increase the structural safety and value of cultural property.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.775-780
• /
• 2002

Sandwich panel made by foamed styrene and ployuretane has been used generally in the construction area because of the high thermal conductivity and light weight but they occur harmful gases to both bodies and environments in the high temperature over $50^{\circ}C$. So, the purpose of this study is to investigate the physical properties of light-weight panel using the non-structural lightweight aggregate as a part of the substitution of foamed styrene and ployuretane. This paper dealt with the effect of the addition of polymer dispersion such as SBR, St/BA-1 and St/BA-2 having polymer-cement ratio as 5, 10, 15% and the filling ratio of continuous void as 50, 60% on the strength of polymer-modified sandwich panel core. From the results, we could know that the compressive and flexural strength of the sandwich panel core using non-structural lightweight aggregate and polymer dispersion such as SBR, St/BA-1 and St/BA-2 tended to be increased with an increase in the polymer-cement ratio and the filling ratio of continuous void.